Colron CRFW325 is a superior blend of natural waxes that provide a deep lustre to fine interior wood, enhancing the natural sheen of the wood and providing long-lasting beauty and protection. Dries to a clear finish. Size: 325g.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 2-16-268 FatMax® Thru Tang Chisel 3 Piece Set includes 1/2, 3/4 and 1 inch chisels.
The Stanley FatMax Quick Adjustable Wrench has a black phosphate finish for maximum strength and durability. Its thin/wide jaws offer greater accessibility when working in tight spaces. They also have a 15 degree offset angle to provide a firm grip and the best reach. Metric and imperial scales for fast and accurate settings. Fitted with bi-material grips for increased comfort and control. The handles also feature a hanging hole for securing the tool to a lanyard.1 x Stanley FatMax Quick Adjustable Wrench 150mm (6in)
The Scan Gel Knee Pads provide protection to your knees when working in a kneeling position. Typical applications include kneeling on uneven surfaces, laminate flooring, roofing work, concrete screening, laying patios and general gardening work. These gel knee pads feature air injected technology and a comfortable gel foam padding that supports the knee, a stabiliser cap provides a comfortable and sturdy supported kneeling position. Adjustable neoprene straps and hook & loop fastening system, allow them to be easily attached over work trousers. The soft internal padding is breathable for all-day comfort. The durable gel pads combined with the waterproof fabric make these knee pads ideal for a variety of working conditions. 3-ply construction provides protection, comfort and stability. The pad caps are anti-slip, non-marking and anti-scratch, and provide mechanical protection with penetration resistance up to 100N and are suitable for work on most surfaces.
The Metabo HSS-G Drill Bit Set suitable for drilling steel and cast steel, alloyed and unalloyed, grey cast iron, malleable cast iron, ductile cast iron, sintered iron, nickel silver, graphite, non-ferrous metals, and plastic. Up to 900 N/mm² tensile strength. The bits have been ground with a cylindrical, DIN 338, type N, 135° crosswise grinding tip. They are supplied in a metal tin and it contains one of each size: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 & 13mm.
The Uni-Com Plug-in Door Chime is ideal for use around the home, plugs into any 13A socket around your home. The door chime is wireless, so no wiring is required, and with an extensive operating range of up to 150m, you never have to miss a visitor or delivery. The bell push is water resistant (IP44 rated).It has three operating modes - chime sound only, LED alert light only and both together, you can set your Door Chime to operate exactly as you want it to. With 30 different chime melodies to choose from, 90dB(A) sound output with volume control and a flashing colour change chime alert, you will always know when somebody is at your door.Bell push powered by 1 x CR2032 Button Cell Battery (supplied).Compatible with all other Wireless + Uni-Com door chimes.
The Stanley Intelli Tools FatMax® Smart Digital Multimeter is highly reliable with a compact, handheld design. Contains all the necessary features to measure DC and AC voltage, DC current, resistance, battery voltage, diodes and forin-circuit continuity test. The Smart Function automatically detects the correct measurement. A 'Hold' function allows you to hold a value for a few seconds. It has a 3.5in LCD display with a dual display option, allowing you to keep 2 values on the screen at the same time. Encased in a robust housing with anti-drop performance. Specification: Voltage: AC/DC 600VResistance: 10M ohmFrequency: 3 kHzContinuity: <40 ohm
The Stanley Tools FatMax® XL Trigger Clamp has an engineered resin body, that provides minimal distortion and movement, with a die cast ergonomic release trigger, for quick-release and class leading grip. It has a tough, heat treated steel I beam bar that provides long lasting strength and durability. Fitted with removable, soft jaw plates that are grooved for improved grip and a recess for bar and rounded materials. The jaw can be easily reversed, to become a spreader without the need for additional tools. The new FatMax XL Trigger Clamp is 24% stronger than the previous model, and holds a stronger force over a 24 hour period. Clamping Force: 270kg.The Stanley Tools FatMax® XL Trigger Clamp has the following specification: Size: 300mm (12in).Clamping Force: 270kg.
The Stanley Quick Vice has a sliding jaw and a one handed lever arm, allowing quick and easy opening, closing and repositioning. It has a steel construction for durability and long life. Removable rubber pads help to protect the workpiece, and screw threads allow tightening to the work surface for a secure grip. Specification Clamping Force: 160kg.Bar Length: 240mm.Clamping Capacity: 110mm.Throat Depth: 80mm.
The Stanley FatMax® Precision Screwdriver Set with handles that are moulded to the bar giving a virtually unbreakable bond and ensuring long life and high torque. The chrome vanadium steel bar improves torque and reduces the chance of tip breakage. A soft grip bi-material handle aids comfort and reduces fatigue. Contains: 1 x Pozidriv: PZ0x75mm.3 x Parallel: 2.5x50mm, 3x50mm, 3x100mm.2 x Phillips: PH00x50mm, PH0x75mm.
These Faithfull Chrome Vanadium spanners have flexible ratchet heads, which can turn through 180°, allowing them to be used in more awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.180° head for access into tight places.5° Fine Ratchet Mechanism. 9 piece combination spanner/ratchet set, consisting of the following sizes:8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm and 19mm.Supplied and held in a convenient plastic clip store.
These Faithfull Chrome Vanadium spanners have flexible ratchet heads, which can turn through 180°, allowing them to be used in more awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.180° head for access into tight places.5° Fine Ratchet Mechanism.Size: 19mm.
The McAlpine Fitting Reducer 2" X1.1/4" Zs26L is a plumbing fitting used to reduce the size of a 2 inch pipe to a 1.1/4 inch pipe. The "Zs26L" in the description refers to the specific model of the reducer, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The reducer has a 2 inch end that fits over a 2 inch pipe and a 1.1/4 inch end that fits inside a 1.1/4 inch pipe. The reducer is designed to create a secure, leak-free connection between the two pipes.
Overall, this type of fitting reducer is commonly used in plumbing applications where pipes of different sizes need to be connected. The McAlpine Fitting Reducer 2" X1.1/4" Zs26L is made from high-quality materials and is designed to provide reliable performance over an extended period of time.
・ Available in 4 sizes
・ Plain end designed to fit in to other fittings or Traps with a compression connection
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine DWU60-CB is a type of basin waste fitting made from chrome-plated brass. It has a 1¼" diameter and is unslotted, which means that it is designed to allow water to flow freely without being restricted.
The backnut model of the DWU60-CB has a 60mm flange and a 3½" tail, which refers to the length of the threaded pipe that attaches to the basin. The mushroom cover plate is the decorative component that covers the waste hole in the basin and is typically circular in shape with a domed top that resembles a mushroom.
Overall, the McAlpine DWU60-CB is a high-quality, durable basin waste fitting that is designed to provide reliable and long-lasting performance. It is a popular choice for both domestic and commercial plumbing applications, and its chrome-plated brass construction ensures that it is resistant to corrosion and easy to clean.
・ Unslotted
・ 1¼" BSP
・ Suits basins without overflows
・ Mushroom cover plate is always open allowing the water to flow freely through the basin
・ 60mm flange
The Lighthouse Nano Torch provides powerful illumination in the palm of your hand. Designed for outdoor adventures, emergency situations, or everyday tasks around the home, this torch combines portability with performance. With an impressive output of 1000-lumens, the Lighthouse Nano Torch delivers a remarkable beam distance of up to 110 metres. And weighing just 100 grams, it easily fits in your pocket or clips onto your bag, making it incredibly convenient for on-the-go use.The torch features four versatile light modes; 25%, 50%, 100%, and the high-intensity TURBO mode - allowing you to adjust the brightness to your needs. Powered by a robust 700mAh Li-ion battery, it offers an impressive run time of up to 10.5 hours on a single charge, ensuring you have reliable light whenever you need it.Designed for durability, the aluminium alloy body is built to withstand the rigours of everyday use while providing resistance to knocks and drops. Plus, the handy charge indicator keeps you informed of the battery level, so you’re never caught off guard.Whether you’re camping under the stars, hiking through the wilderness, or simply need a dependable source of light for your daily activities, the L/HMT1100R Nano Hand Torch is the perfect tool for the job.Supplied with 1 x USB C Charging Lead.Specifications:Brightness: 1,000 LumensBeam Distance: 110mWater Resistant: IPX4Impact Resistant: 1m
This DEWALT Multi-Tool Titanium Metal Blade is designed for improved life when cutting metal. It has 18TPI for cutting both hard and soft metals. The blade is quick and easy to change and fits all common oscillating tools. Blade length: 43mm.Blade width: 30mm.
The Irwin Professional Aluminium Circular Saw Blade has expansion slots that help keep the blade flat. Triple Chip Ground Tooth (TCG) provide an excellent cut finish. Specially designed for cutting all types of non-ferrous metals such as aluminium, copper, lead and plastics.This IRWIN Professional Aluminium Circular Saw Blade has the following specifications: Blade Diameter: 216mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 2.5mm.Tooth Config: TCG.
These Faithfull Quick Repair Links are ideal for use where temporary but secure fastenings are required. The connection is made by the hexagon locking collar.The links are resistant to corrosion, thanks to their finish. Chain accessories should never be used for any overhead lifting, load binding or towing applications.These Faithfull Quick Repair Links have the following specification: Finish: Zinc Plated.Diameter: 5mm.Inside ;Link: ;39 x 12mm.Pack of 4.
Faithfull versatile flexible sanding pad, double sided and washable, can be used on wood, paint, metal and plaster, wet or dry and even with chemical paint strippers. Pack of 10.Ultra fine Colour - grey
The DEWALT Force Gilet is suitable to wear as an under or over layer garment. It features a lightweight padding that has a shower resistant nylon outer and a polyester/taffeta inner lining. Comfort stretch side panels and lowered back with centre zip fastening. With 2 hand pockets to lower front and a zipped breast pocket. It also has a reflective DEWALT logo on the chest and rear neck. Available in Sizes Medium - XXXLarge Material Composition: Nylon outer & Polyester/Taffeta innerDEWALT Force Black Lightweight Padded Gilet in Extra Large
Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 380mm (15 in).Jaw Capacity: 44mmWeight: 1035g.Spare Adjustable Jaw BAH8074C-2 - Available to orderSpare Knurl Set: BAH8074C-95 - Available to order
Profil 2 is a section setting tool. These metal frame pliers are for quick and efficient punching and setting of rails and studs in drywall insulation. They make it possible to work close to a wall and no screws or anchors are needed. Jaw Opening: 15mm.Length: 330mm (13in).Width: 60mm (2.3/8in).
The Unibond Aero 360 Moisture Absorber Refill effectively absorbs excess moisture and neutralises bad smells in your home. Ideal for every room inside the home and caravans/boats. No noise and no electricity. Refill lasts for approximately 3 months in a 20m² room. Helps to prevent condensation, dampness, and the development of mould and dust mites, which could cause allergies.Pack of 2 UniBond Aero 360 Moisture Absorber Wildflower Meadow Refills
The Bahco 808050S-22 Stubby Ratchet Screwdriver Set is a compact 18-piece set and is ideal for all small screwdriving applications and is suitable for both trade professionals to DIY'ers. It is a great addition to any professional or DIY enthusiasts tool box, and is stored in a bright, easy to see, hard plastic case with foam inlay to hold all parts securely in their desired location. The Bahco 808050S Stubby Ratchet 1/4in Screwdriver with a three-component handle with textured finish, compact for access to enclosed spaces. High torque bearing capacity and lifetime endurance. Magnetic shank secures bit in screwdriver and makes bit changing easy. Smooth ratcheting stroke, allowing three position ratchet mechanism: forward, reverse and neutral. Has a fine tooth ratchet mechanism, with 48 teeth. Contents: 1 x 808050S Stubby Ratchet Screwdriver 17 x 25mm S2 Zinc Phosphate Bits: PH1, PH2, PH3, PZ1, PZ2, TX10, TX15, TX20, TX25, TX27, TX30, TX40, SL4, SL5, SL5.5, SL6.5, SL1/4in 1 x 1/4in Socket Adaptor 1 x 1/4in Bit Adaptor 1 x 50mm 1/4in Square Hex Bit Holder 1 x 150mm 1/4in Square Flexible Socket Adaptor
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat second.Tanged.
The Bahco 3906 Sandflex® Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof bi-metal blades, with precision ground teeth for all kinds of metal sawing. With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.These Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 18tpi are supplied as a pack of 10 in a special package with a hanging loop.
Bahco Handled Half Round Cut File with a ERGO™ handle is a tapered half round file with cross section which allows use on convex and concave surfaces, suitable for deburring work. The edges and surfaces are tapered towards the point. 8in file are semi-pointed. Double cut. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Bahco Handled Half Round Second Cut File 1-210-08-2-2 Size: 200mm (8in).Cut: Half Round Second Cut.
The Norbar TTi Wrenches are accurate upto ±3%, which exceeds all international standards for torque wrenches. Every wrench comes with a traceable calibration certificate. Quick and light adjustment over the entire scale can be quickly achieved with minimal effort in approximately 10 complete turns (exact number varies by model) and they have a micrometer scale for simple and error free setting. All models have an adjustment lock to prevent accidental adjustment of the set torque. The ratchets have a narrow engagement angle of 5º on the TTi50 and 6º on all other models, allowing easy positioning of the tool in the tight confines of today’s vehicles and machines. They also have a comfortable, durable handle that is constructed using 2 materials: a base material for strength overlaid with a soft feel grip for comfort and slip resistance. The handle and lens resist chemicals in common usage in the automotive, aviation and industrial environments.TTi 50 Torque Wrench 1/2in Square Drive 10-50Nm specification detailed below.
The Fiskars CarbonMax Snap-off Knife features a convenient front-loading blade change with no loose parts, making your blade changes easier and quicker. Its metal body provides optimal balance and job site durability. The reinforced metal end provides robust and reliable resistance against pounding and drops. An integrated segment snapper easily snaps old blades and then captures them, so you don't have to worry about stray, used blades. The ergonomic handle with SoftGrip features a dynamic grip pattern for all-day comfort and control. Supplied complete with 1 Snap-off CarbonMax utility blade which lasts 24x longer than standard utility blades. 1 x Fiskars CarbonMax Snap-off Knife 18mm.
The Fiskars Norden N10 Chopping Axe has a 35.5cm hickory wood handle that makes it ideal for easy one-handed use. The handle also incorporates virtually unbreakable Fibercomp™ overstrike protection. Carbon steel blade with a precision ground, ultra-sharp cutting edge that stays sharp. The anti-friction coating prevents the blade from getting stuck and protects against rust and dirt. A great general tool for chopping and kindling tasks, and small construction projects around the house. Protective blade cover included. Made in Finland. Specification: Weight: 1.2kg (2.6 lb)Length: 355mm
Fiskars Plus Bypass Pruner with Power-Lever technology, adds cutting power through tough stems and branches. Its fully hardened, precision-ground steel blade feature a low-friction blade coating which resists rust and improves performance, resulting in smoother cuts and less gumming. Suitable for clean cuts on green, living growth. Fitted with durable, ergonomically designed, cast-aluminum handles which fits the natural shape of your hand. SoftGrip details provide a secure, comfortable grip. There is also a conveniently placed sliding lock for quick and easy activation. Specification: Max. Cut Capacity: 24mm Ø.
The tall double door air curtains provide a welcoming curtain of warmth for tall, double width doorways in shops, hotels, offices and other commercial premises.
6kW or 9kW rating
Single or 3 phase
Wall mounting bracket supplied for ease of installation and angular adjustment
Suspended, wall or trunking mounted
Supplied with remote switch
3 heat settings and 2 fan speeds
Fan only setting for air circulation
Automatic safety cut-out
Compatible with Building Management System (BMS)
Finished in white
The ROUGHNECK COLT 600E Sawhorse is a tough and stable. Its heavy-duty steel construction ensures strength and durability when it matters most. Each COLT 600E Sawhorse stands its ground with an impressive weight-bearing capacity of 589kg, a substantial 1178kg when used as a pair. Powder-coated for added resilience, these sawhorses boast a rugged exterior that stands up to the toughest environments. Independently height-adjustable legs, constructed from heavy gauge steel, for increased stability. Pivoting feet ensure a steadfast grip, rubber pads adding an extra layer of support and surface protection. Working height is customisable from 630-820mm, with stability ensured through secure locking at 28mm intervals. Unique to the COLT 600E the innovative Pipe-Prop feature conveniently holds 15mm and 22mm pipes, rods, and dowels ready for cutting. Sheet material support arms facilitating upright cutting with ease, accommodating larger pieces effortlessly with just one sawhorse. Extendable timber supports adjust to fit 2x4s or 4x4s. This transforms two sawhorses into a stable, sturdy worktable, providing a versatile platform ready for hard graft. Specifications: Max. Distributed Load: Single 589kg (1300 lbs), Pair 1,178kg (2,600 lbs).Working Height: 630-820mm.
1 x ROUGHNECK COLT 600E Sawhorse.
The Fiskars Norden N7 Chopping Axe has a small, compact design. Ideal for limbing, chopping and kindling. Fitted with a high-quality hickory wood handle with virtually unbreakable FiberComp™ overstrike protection. Carbon steel blade with a precision ground, ultra-sharp cutting edge that stays sharp. The antifriction coating prevents the blade from getting stuck and protects against rust and dirt. The perfect companion for camping, hiking and other outdoor activities. Protective blade cover included. Made in Finland. Specification: Length: 172mmWeight: 800g (1.7 lb)
Roughneck Splitting Maul is ideal for splitting wood and driving wedges. The unique anti-stick blade is designed for faster and easier splitting. Made from hardened and tempered drop forged alloy steel with a solid core fibreglass handle and polypropylene cover. Has a double injected TPR soft grip handle, and an integral overstrike protection. Has a polished striking face with chamfered edges. Uses industrial grade epoxy for longer lasting bond. Handle length: 875mm (35in).
Roughneck Splitting Maul is ideal for splitting wood and driving wedges. The unique anti-stick blade is designed for faster and easier splitting. Made from hardened and tempered drop forged alloy steel with a solid core fibreglass handle and polypropylene cover. Has a double injected TPR soft grip handle, and an integral overstrike protection. Has a polished striking face with chamfered edges. Uses industrial grade epoxy for longer lasting bond. Handle length: 875mm (35in).
