Sikacryl®-620 Fire is designed for fire resistant connection joints on porous and non-porous substrates. Typically used for joints in walls and floors, and internal perimeter pointing of fire rated doors and window frames. Its water-based formula offers good workability, good adhesion to a wide range of substrates and is over-paintable.Provides up to 4 hours fire resistance to prevent the passage of fire and smoke, according to EN 1366-4.
1 x Sikacryl®-620 Fire Resistant Acrylic Sealant White 300ml
SikaBond® PVA+ is a medium viscosity, polyvinyl alcohol stabilized, externally plasticised, vinyl acetate homopolymer. Contains no harmful phthalates. An ideal primer and sealer for concrete and plaster. It has been designed specifically for use in the building industry as a general purpose, quick drying bonding agent for concrete and cement. It also acts as a mortar improver and admixture for screeds and renders.
1 x SikaBond® PVA+ 2.5 litre
Sikacryl®-620 Fire is designed for fire resistant connection joints on porous and non-porous substrates. Typically used for joints in walls and floors, and internal perimeter pointing of fire rated doors and window frames. Its water-based formula offers good workability, good adhesion to a wide range of substrates and is over-paintable.Provides up to 4 hours fire resistance to prevent the passage of fire and smoke, according to EN 1366-4.
1 x Sikacryl®-620 Fire Resistant Acrylic Sealant Grey 300ml
SikaBond® PVA+ is a medium viscosity, polyvinyl alcohol stabilized, externally plasticised, vinyl acetate homopolymer. Contains no harmful phthalates. An ideal primer and sealer for concrete and plaster. It has been designed specifically for use in the building industry as a general purpose, quick drying bonding agent for concrete and cement. It also acts as a mortar improver and admixture for screeds and renders.
1 x SikaBond® PVA+ 1 litre
Sikacryl®-620 Fire is designed for fire resistant connection joints on porous and non-porous substrates. Typically used for joints in walls and floors, and internal perimeter pointing of fire rated doors and window frames. Its water-based formula offers good workability, good adhesion to a wide range of substrates and is over-paintable.Provides up to 4 hours fire resistance to prevent the passage of fire and smoke, according to EN 1366-4.
1 x Sikacryl®-620 Fire Resistant Acrylic Sealant Grey 600ml
Command™ Picture Hanging Strips are an innovative solution for easily hanging framed photos and artwork. 3M stretch-release technology provides a strong hold and removes cleanly.Make decorating quick and easy. These Picture Hanging Strips securely hold frames to a variety of surfaces; solid, hollow and painted walls. When you’re ready for a change, they can easily be removed without damaging the surface underneath. No holes, damaged paintwork or sticky residue.The decorating possibilities are endless, create a display of framed postcards or a photo montage up the stairs. They’re a great nail-free solution for rented accommodation where you may be worried about damaging walls.Includes: 4 Pairs of Large (19 x 93mm), White Command™ Picture Hanging Strips (8 Strips total).2 pairs of large strips can hold one frame weighing up to 3.5kg, and measuring up to 45 by 60cm. 4 pairs of large strips can hold one frame weighing up to 7kg, and measuring up to 60 by 90cm.
Command™ Picture Hanger for wire-backed frames. No need for nails or screws. Command™ Picture Hangers are easy to use and help you decorate your walls without leaving any marks. Decorate, organise and celebrate damage free with Command™. Indoor use only. Recommended for use on painted walls, finished wood, painted concrete cinder blocks, laminate, glass, metal and tiles.1 hook can hold one frame weighing up to 2kg, and measuring up to 28 by 43cm.They can be removed without leaving any residue. Lightly hold the top of the removable adhesive strip and slowly pull straight down towards the floor to remove decor and prevent damage of walls and surfaces.Includes: 1 hanger and 2 large strips.
Command™ Jumbo Canvas Hanger. No need for nails or screws. Command™ Picture Hangers are easy to use and help you decorate your walls without leaving any marks. Decorate, organise and celebrate damage free with Command™. Indoor use only. Recommended for use on painted walls, finished wood, painted concrete cinder blocks, laminate, glass, metal and tiles.1 hook can hold one frame weighing up to 2kg, and measuring up to 60 by 90cm.They can be removed without leaving any residue. Lightly hold the top of the removable adhesive strip and slowly pull straight down towards the floor to remove decor and prevent damage of walls and surfaces.Includes: 1 hanger and 4 large strips.
Replacement screw-in plastic orange faces for Thor plastic hammers. Medium hard all purpose face, for light and heavy assembly work.For use with Thor plastic hammer THO416. Diameter: 50 mm (2in).
The Thor super Plastic split head hammers have a split cast iron head with two white super plastic faces fastened securely to the handle with two socket head cap screws. There are 5 different weights to choose from in this range. Head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. For use as a heavy-duty, multi-purpose, soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 2.Diameter: 38mm (1 1/2in).Weight: 960g (2lb).
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diameter. 50mm.Width.10mm.Wire Height. 20mm.Wire Gauge.0.30.Wire Type. Steel.Max. R. P. M.10,500.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 200mm.Width. 45-48mm.Min/Max Bore: 16/80mm.Wire Gauge. 0.30/0.35.Wire Type. Steel Crimped.Max R.P.M. 4,500.
Raised wooden stock broom head only (Handle Hole size 7/8in) with steel wire, - 6 row.Used in industry and in the workshop.Length:- 300 mm Width:- 70 mm
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: A.Weight 340g (12oz).Diameter 25mm (1 in).
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 5
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
DZR brass body with a chrome plate is ideal for surface mounted pipework
Instant push-fit service valve with 1/4 turn isolation screwdriver slot
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The Makita DGP180 LXT Grease Gun features two speed modes: slow and auto speed change. Auto speed change mode applies grease while varying the flow rate, automatically matching the resistance of the part being greased. Bulk grease can be directly loadable into the barrel. Fitted with an ergonomically designed handle and soft grip for increased comfort. There is also a lock-on function, ideal for long work periods with reduced fatigue, and a handy LED job light. Supplied as a Bare Unit - No Battery or Charger. Supplied with: 1 x Flexible Hose and 1 x Shoulder Strap. Specification: Max. Operating Pressure: 10,000 psiFlow Rate (Slow/Auto Speed): 145/290ml/min.Grease Capacity: Cartridge 410g, Bulk 455gFlexible Hose Length: 1,200mmWeight: 4.8kg (without battery)
A lightweight lever type mini pistol grease gun with a delivery tube which can be rotated through 360° and is designed to be used one handed. Complete with air release valve, rigid tube and hydraulic connector for bulk filling. Develops 500 Bar of pressure.
The Makita B-33015 Blade has been specifically for use with plunge type saws. Patented vibration dampening allows the blade to run truer with less wobble, easily plunging into material with little effort. Suitable for cutting both wood and aluminium, they are especially designed for a smooth clean cut. Specifications: Blade Diameter: 165mm.Bore: 20mm.Kerf: 2.2mm.Rake: 8°.Thickness: 1.6mm.Tooth Count: 48.
The Makita GDO810C Die Grinder offers a high, constant speed even under load and has a soft start feature. It has a maximum 8mm collet capacity and an internal labyrinth construction that seals that motor and bearings from contamination. The tool is double insulated for increased user protection. Supplied with a 6mm Collet Cone. Specification Input Power: 750WNo Load Speed: 7,000 - 28,000/min.Collet Capacity: 8mmWeight: 1.6kg
The Makita XGT 40Vmax Li-ion Battery has been built to withstand harsh environmental conditions. It has a robust construction, protected against dust with a splash-proof design and an integrated cooling system for maximum durability. Equipped with an LED indicator which shows the remaining capacity of the battery. The XGT 40Vmax range is equipped with special electronics providing digital communication between tool, battery and charger. This allows the charger to provide the optimal charge to the battery depending on the status of the battery, whilst the tool can respond to the status of the battery by optimising performance to the battery level.
1 x Makita BL4040F XGT 40Vmax Battery 40V 4.0Ah Li-ion.
The Makita DJR187RTE Brushless LXT Reciprocating Saw is supplied with: 2 x 18V 5.0Ah Li-Ion Batteries1 x DC18RC Fast Charger2 x 152mm Reciprocating Saw Blades (6TPI and 18TPI)1 x Carry Case
John Guest Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
The Irwin Record 135 Series Heavy-Duty Sash Clamps have a bar section of 32 x 6mm (1.1/4 x 14in). The slide and head are guaranteed unbreakable and the slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar. The steel mainscrew applies pressure quickly and smoothly through a fast acting, hard-wearing rolled thread. Slides and heads are flat bottomed so that the clamp will stand without support.1 x Irwin Record 135/6 Heavy-Duty Sash Clamp - 1200mm (48in) Capacity.
The Fiskars Norden N12 Splitting Axe provides easy splitting of small sized logs up to Ø20cm. Fitted with a high-quality hickory wood handle with virtually unbreakable Fibercomp™ overstrike protection. Safest, undetachable axe head and shaft connection. Its carbon steel blade has a precision ground, ultra-sharp cutting edge that stays sharp. The anti-friction coating prevents the blade from getting stuck and protects against rust and dirt. Protective blade cover included. Made in Finland. Specification: Weight: 1.3kg (2.8 lb)Length: 526mm
Gorilla Super Glue keeps holding strong, even when the bond takes a hit. Just hold in place for 30-60 seconds while the formula sets, no clamping necessary. Suitable for use on nearly anything: wood, metal, ceramics, some plastics, rubber and much more. Features include: IMPACT STRENGTH - unique rubber particles increase impact-resistance and strength to handle everyday use after your repair or creation is set. WON'T CLOG - anti-clog tip with metal pin keeps nozzle clean. EASY TO USE - thick formula flows better for improved control. Dries in just 30-60 seconds, with no clamping. WHATEVER THE SURFACE - use on nearly anything, from wood, metal, ceramics, some plastics, rubber and a whole lot more!Size: 3g.
