The PlastiKote Aluminium Primer Spray provides base adhesion on any aluminium surface such as bike frames and model aircraft etc. It gives an even layer of base colour and increases the adhesion of the topcoat. Drying time: touch dry in 10-20 minutes, thoroughly dry in 30-40 minutes.Coverage: approximately 2.23 m² (Coverage varies by colour and application).Suitable for use on aluminium.
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Sunshine Yellow.
MaxiColor is a decorative paint for use on treated and untreated wood, metal, aluminium, glass stone and plastic. It offers excellent coverage and adhesion with minimal drips. Suitable for use indoors or outdoors.Available in a wide range of RAL colours.
1 x MaxiColor Spray Gloss Light Grey RAL7035 400ml
Non-woven hand pads for general sanding and preparation applications. Ideal for contoured or shaped surfaces. Made in Great Britain.For preparing factory primer, scuffing back base coat through to a very fine finish. Approx. 240 grit. Grade: Standard Very Fine Size: 150 mm x 223 mm Colour: Maroon Pack: 10
MoTip Pro Copper Spray has a high copper content to prevent wear and sticking of screwed connections which are exposed to very high temperatures. It has high thermal stability and is corrosion preventive. Resistant to chemicals and weather influences. Specification: Temperature Resistant: -40°C up to +1,100°C.
The Flexipad Medium Density Pads are suitable for polishing and grinding, these will accept GRIP® and hook and loop backed sanding discs. The super polyurethane backing pad is made from impact resistant synthetic nylon which is bonded to microcellular polyurethane and with internal thread to suit sanders and polishers. Excellent resistance to initial and continuing tearing, oil and ageing. Made in Great Britain.Diameter: 150mm.Metal Centre threaded internally: M14 x 2.
PlastiKote Metal Spray Primer offers ultimate metal protection with a non-sanding formula for areas of moderate corrosion. The primer is quick and easy to apply and fast drying. Available in a range of colours. For protection from severe corrosion use PlastiKote Zinc Primer which actually fuses to the surface it is applied to. Drying time: touch dry in 20 - 40 minutes, thoroughly dry in 2 - 4 hours. Coverage: approximately 2.23m² per tin.PKT10599 metal primer has the following specifications:Colour: Zinc. Pack size: 400ml.
The PlastiKote Trade Quick Dry Trim Spray Paint is a high-quality paint that is ideal for all window sills and wood trim. It is also the first ever trade quality trim paint in spray form. It has a next gen formulation, meaning the paint can be applied on almost all surfaces. Produces a long-lasting, durable, scratch resistant finish. Comes in 2 white finishes: high gloss and satinwood.This PlastiKote Trade Quick Dry Trim Spray Paint has the following specification: Finish/Colour: High Gloss WhiteSize: 400ml
The PlastiKote Glow In The Dark Spray Paint is suitable for wood, metal, plastic, stone wicker and crafts. Ideal for use in childrens bedrooms or other craft projects. For best results use a white primer. Touch Dry: 1 Hour.Coverage: Approximately 1m².
For use with GRIP® fastening backed sanding discs, sponge backed with 6 mm spindle. Ideal for curved surfaces. Made in Great BritainType. 25-SP10-VEL.Size. 25 mm.
A dense, firm sponge for compounding 2 pack paint systems, excellent results with all leading makes of compound and polish. Also for polishing automotive paintwork, acrylic, marine and aerospace finishes. This very firm material is ideal when compounding all modern paint systems including LVHM. Diameter: 150mm x 50mm Made in Great BritainUse with Flexipad foam support pads 36350 (M14), 36355 (5/8) 36357 (M16) Premium quality very firm foam hook and loop fixing for use with sander/polisher. Type: Grip® fastening.
The PlastiKote Industrial Metal Primer Sprays increase the life and durability of metal surfaces. They seal out moisture and inhibit rust formation. Metal Primers protect and seal all bare surfaces without the need for sanding. Quick drying. Drying time: touch dry in 20-40 minutes, thoroughly dry in 2 - 4 hours.Coverage: approximately 2.23m².PKT779 Industrial Primer has the following specifications:Colour: Red Oxide. Pack size: 500ml.
PlastiKote Trade One Coat Spray Tile Paint is a fast-drying acrylic lacquer for treating and updating bathroom and kitchen tiles. Trade Functional Sprays are ideal for every professional builder, tradesman or painter/decorator. Specification: Coverage: 1-1.75m²Touch Dry: 10 minutes
The DEFENDER Range of Combination products are based on the design to offer protection at an affordable cost. Bodies are made of die-cast material. Combinations are resettable and allow protection without the need to carry a key, so overcome the issue of lost keys. 40mm version utilises a 4-wheel mechanism which provides 10,000 differs, the smaller versions have 3-wheels giving 1,000 differs. Available in 3 sizes designed to be used on luggage, toolboxes and lockers. Comes complete with a 2 year guarantee.1 x DEFENDER by SQUIRE Black Diecast Combination Padlock 40mm
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 2
Faithfull versatile flexible sanding pad, double sided and washable, can be used on wood, paint, metal and plaster, wet or dry and even with chemical paint strippers. Pack of 10.Very fine Colour - maroon
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
JG Speedfit cold water service equal Tee to connect three equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal Tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 2
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK.
Compatible with plastic or copper pipe
Suitable for hot and cold water and heating applications
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 10
JG Speedfit cold forming bend helps create a tighter bend than the minimum allowed when the pipe is unsupported. Designed, manufactured and assembled in the UK. Compatible with plastic or copper pipe Suitable for hot and cold water and heating applicationsPack of 5
John Guest push-fit acetal two way divider fitting splits supply to two equal supply feeds. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65oC max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65oC max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
Pack of 2
This Vitrex Notched Adhesive Trowel with square notches, making it ideal for applying adhesives prior to the setting of wall and floor tiles. The hardened and tempered steel blade ensures toughness and durability, and the large soft-grip handle provides extra comfort. Size: 115 x 280mm (11 x 4.1/2in).Vitrex Notched Adhesive Trowel. Size: 115 x 280mm (11 x 4.1/2in).Sqaure Notches: 6mm.
John Guest stem adaptor (BSP thread) adapts a push-fit connection to an imperial threaded connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 5
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 4
Faithfull aluminium oxide resin bonded onto a durable X-Weight cloth belt for high-speed industrial use on ferrous metals and hardwoods and suitable for both stock removal and finishing applications. The belts are bi-directional, and benefit from butt joints and smooth slot to ensure scuff-free performance.Pack of 3 Faithfull Cloth Sanding Belt 400 x 60mm 120g
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 3
The Hozelock Round Tap Connector designed for round and oval spout taps. The fitting is sealed to the tap by tightening the stainless steel clip.Maximum diameter: 18mm.
This Hozelock multi-tap connector is designed to fit a wide variety of square, round and mixer taps, of up to 43mm high by 34mm wide. It comes complete with a choice of sealing washers to provide a leak-free connection.
Manufactured using a robust E-Weight paper, these Faithfull Aluminium Oxide abrasive rolls are ideal for preparing surfaces before painting, and can be used on wood, metal or plastics. The rolls are ideally suited to tradesmen and regular users. Coarse grades are extremely efficient for the quick removal of old paint or tackling rough surfaces. Fine grades are used for achieving smooth finishes. 115mm wide rolls can be used on half sheet sanders when cut to the appropriate length. The standard quality 200g glue bonded yellow paper roll is ideal for hand sanding and light-duty power sanding on paint, plaster, fillers and softwoods. Ideal for decorators.The Faithfull FAIAR11580Y Aluminium oxide paper yellow roll has the following dimensions: Size: 115mm X 50m.Grit: 80g.
