The Bahco 244P-22-XT Blue XT Handsaw is suitable for cutting coarse or thick wood materials. It has unique XT-toothing and hardpoint teeth for long-lasting sharpness. It has two sets of teeth that work in conjunction with each other, one set cuts and the second set clears with each stroke. In addition, the blade has a low friction, anti corrosion blue coating. This is a powder coating is magnetically bonded to the blade and teeth, leaving it rust proof and easy to use. The saw's screwed, 2-component handle can be used as an approximate 45° and 90° marking guide and increases user comfort. Specification Length: 550mm (22in).Blade thickness: 1.03mm.Teeth: 9 tpi.
Ronseal Diamond Hard floor varnish is ideal for any wooden floor. It provides protection against heavy foot traffic, knocks, scuffs, scratches and its non-yellowing formulation enhances the natural beauty of the wood. Touch dry in 30 minutes, it means floors are back in use as soon as possible. Ideal for use on any type of wooden floor especially in areas subject to heavy foot traffic and has the following specifications:8m² per litreAreas of use: Wooden floorsCoverage: 20m2 covered per litreNumber of coats: 3Finish: Gloss and SatinApplication: BrushDrying time: 30 minsProtection level: Very highThe Ronseal RSLDHFVG25L Diamond Hard Floor Varnish comes in the following:Finish: GlossSize: 2.5 Litre
The Bahco ERGO™ VDE Insulated Screwdrivers built for slotted head screws. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The black oxide finish tip provides higher accuracy.Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage.Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V.Conforms to: ISO 2380/DIN 5264.
1 x Bahco ERGO™ VDE Insulated Slotted Screwdriver 3.0 x 100mm
Ronseal One Coat Tile Paint rejuvenates old tiled surfaces for a completely new look without the need to re-tile. Ideal for use on kitchen and bathroom tiles. It is waterproof and mould resistant. No primer required. Water-based with a low V.O.C content. Suitable for bare or previously painted tiles. This product is NOT recommended for floor tiles or tiled work surfaces.1 x Ronseal One Coat Tile Paint Ivory Satin 750ml
Tri-Flow provides preventative maintenance and problem solving solutions for the most demanding applications. Its unique formula also contains P.T.F.E. to maximise load bearing, reduce friction and wear and resist corrosive build up. - Virtually eliminates friction and wear, even under the most extreme pressure and abrasive conditions.- Displaces and prevents the build-up of dirt and dust.- Repels moisture, preventing the formulation of ice, rust and other corrosives.- Effective at -53° C to +246° C. Protects, lubricates and penetrates. Suitable for use on:- Folding ArmsHingesPulleysGuide RailsGearsAgricultural MachineryWater PumpsLawnmowersSoil Working ToolsTracksPneumatic Components (cylinders, valves, etc...)Roller TablesWinchesCement MixersLifting ArmsChainsCablesLocksTool ProtectionBearingsRunnersScaffoldingEarth-Moving EquipmentPneumatic DrillsConveyor BeltsRevolving SupportsDrillsValvesSize: 500ml.
The Roughneck Railroad Pick Axe has a head made from roll forged alloy steel. That has hardened and tempered with a black painted finish. The ends are chisel and point. The fibreglass handle has a solid core and polypropylene cover. Supplied in a handy carry box.1 x Roughneck Fibreglass Handle Railroad Pick Axe 3.18kg (7lb)
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel and chrome plated in a matt finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or tightened, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, just push the direction lever to remove or tighten the nut or bolt with a ratchet action. They are an ideal option for motor mechanics, as these spanners can be used in awkward places and minimal movement is required to use them.1 x Bahco S4RM Series Reversible Ratchet Spanner 30/32/34/36mm
Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 270mm (10 1/2 in)Teeth 18.5 tpi
The Bahco sports knives have a durable alumiunium handle, with stainless steel blades and mechanism. The blades lock securely into position when fully unfolded and are only released with the unlock button. This avoids accidental folding. With a small hole on the back end, the knives allow for a safety strap to be attached. This BAHBSTK Twin Blade Sports Knife features two different blades - one standard utility blade and one sports knife blade with serrated edges.
The Makita DK0176G205 40Vmax Twin Pack contains the following: 1 x 40V HP001G XGT 40Vmax Brushless Combi Drill with 2 mechanical gears, trigger controlled variable speed, and both forward and reverse rotation. A digital display provides visual confirmation of the selected torque. Provides excellent performance in continuous heavy-duty applications. Active Feedback Sensing Technology (AFT): Shuts down the tool if the rotation speed suddenly slows down. Chuck: 13mm Keyless.No Load Speed: 0-650/0-2,600/min.Impact Rate: 0-9,750/0-39,000/bpm.Torque: 68Nm/140Nm, Settings: 21/41.Capacity: Concrete/Metal 20mm, Wood 76mm.Weight: 3.0kg. 1 x 40V TD003G XGT 40Vmax Brushless Impact Driver with 4 modes of impact power selection:Max./ Hard/ Med./ Soft for bolt) and 1 T-mode for thin metal only. The rubber grip on the handle ensures a good working grip. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,700/3,200/2,100/1,100/min.Impact Rate: 0-4,100/3,600/2,600/1,400/bpm.Max. Torque: 210/170/50/20Nm.Tightening Capacity: Standard BoltM5 - M16. Also supplied with 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries, 1 x DC40RA XGT® Fast Li-ion Charger 240V and1 x Type 3 MAKPAC Connector Case.
The Makita DCO180 Drywall Cutter has been designed for cutting holes in drywall, at either construction or renovation sites. It has a high rotation speed for fast cutting. The anti-restart function prevents accidental restart of the tool, even if the switch is in the 'o' position when a new battery is installed. The compact, lightweight design features an ergonomic, barrel handle with soft grip for a secure, comfortable hold whilst minimising hand fatigue and pain. For added safety there is an electronic current limiter for overload protection. Comes as a Bare Unit, No Battery or Charger. Specification: Collet Capacity: 1/8inStrokes at No Load: 30,000/min.Stroke Length: 11.5-31.0mmWeight: 1.7kg
FatMax® Shallow Professional Organiser has 10 removable storage compartments, providing storage for small parts, components or accessories. It is made from transparent polypropylene, is virtually unbreakable lid and it allows the contents to be viewed easily. Features a waterproof seal that not only prevents water, but also rust and foreign particles from entering. It has metal catches. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Dimensions: 44.6 x 35.7 x 7.4cm Water resistant to IP53
FatMax® Shallow Professional Organiser has 10 removable storage compartments, providing storage for small parts, components or accessories. It is made from transparent polypropylene, is virtually unbreakable lid and it allows the contents to be viewed easily. Features a waterproof seal that not only prevents water, but also rust and foreign particles from entering. It has metal catches. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Dimensions: 44.6 x 35.7 x 7.4cm Water resistant to IP53
Pack of 2
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings only
Pack of 6
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings only
Pack of 4
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings only
Pack of 2
Always use a JG Speedfit superseal pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. JG Speedfit superseal pipe insert contains dual O-Rings to provide even greater sealing security than a standard insert. The first O-Ring is on the stem that is pushed into the pipe to prevent water from inside the pipe passing between the inside of the pipe wall and the outside surface of the insert. The second O-Ring sits on the end of the insert and seals inside the push-fit fitting, becoming a seal between the main pipe and push-fit fitting. When superseal Inserts are used with Speedfit push-fit fittings a multi-seal is formed as all push-fit fittings also include a main O-Ring seal. 2 extra O-Rings provide enhanced sealing (10mm version features one o-ring only) Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems Suitable for Speedfit pipes and fittings only
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. The screws come complete with a Phillips No.2 insert bit. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. APPLICATION:Designed for fitting dry linings to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 38mm Box 200
The PlastiKote Super Gloss Spray is an excellent multipurpose spray paint. It comes in a range of finishes to suit many applications. The paint is tough, hard wearing and resistant to scratches. Super Spray Paint is very UV absorbent, water resistant, and will not fade or yellow. It protects against rust and is fast-drying. The paint is suitable for any decorative project inside or outside of the home, and is available in many colours. Suitable for: aluminium, fibreglass, glass, iron, masonry, metal, paper, papier mache, plastic, steel, stone, terracotta, wicker and wood. Not for use on high impact styrene, leather, Styrofoam and vinyl. Drying time: Touch dry within 30-50 minutes. Recoat within 1 hour. Coverage: approximately 2.23m² per pack.PKT1115 Super Gloss has the following specifications: Finish: Gloss. Colour: Yellow. Pack Size: 400ml.
Polycell Crack-Free Ceilings is a great way to restore cracked ceilings to a smooth, new-looking finish. Its flexible paint formulation uses Polyfilla technology to not only permanently cover cracks and stains, but prevent them from reappearing. For indoor use on plaster, plasterboard and masonry. Drying time: Surface dry in 2-3 hours (depending on conditions).Size: 5 litres. Finish: Matt.
Polycell Polyfilla for Wood is a ready to use, low odour, multi purpose wood filler for general and minor repairs to interior and exterior wood. The formulation is quick drying, giving a tough and durable fill that flexes with the natural movement of wood. Can be painted, stained or varnished in 2 hours (depending on conditions) and fills holes up to 10mm deep in one application. The filler will not shrink or crack, and can be nailed or screwed. It is water resistant, and can be used for interior and exterior use.Polycell Polyfilla For Wood General Repairs Tube. Colour: Dark.Size: 330g.
IRWIN® HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high-quality HSS steel containing 5% cobalt (Co). The added 5% cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish. This 15 Piece Set contains the following sizes: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size: 2.5 x 57mm.PVC Tube.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size 10.0 x 133mm.PVC Tube.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 14.0mm.Total length: 300mm.Working length: 240mm.
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 2mm.Working Length: 24mm.Overall Length: 49mm. Pack of 2.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills. Specifications:Diameter: 16.0mm.Total length: 160mm.Working Length: 85mm.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502819 Blue Groove 4x flat bit has the following specific dimension:Diameter: 30mm
The Irwin auger wood drill bit has been designed for all general wood boring and offers a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability. The Irwin IRW10502748 Auger drill bit has the following dimensions:Drillbit diameter: 12.0mmTotal length: 191mmWorking Length: 114mm
The Weller WLACCSCI Soldering Iron Storage Case helps to maintain a clean and organised soldering work environment. The case's hard-shell exterior and soft interior lining protect the iron when not in use. Zips closed for safe and secure transit. Dimensions: 31 x 14 x 6cm (12 x 5.5 x 2.5in)
The Irwin Metric HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high quality HSS steel containing 5% Cobalt (Co). The added 5% Cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish.Diameter: 10.0mm.Working Length: 87mm.Overall Length: 133mm.
