These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.Oval Lost Head Nail Bright 75mm Bag Weight 500g
These ForgeFix Phillips Baypole Screws with wafer head are specifically designed for joining PVCu sections, particularly in bay windows. The nails have a self-drill tip and are zinc plated for increased corrosion resistance and durability. The wafer head distributes the load under the screw head, offering a firm positive fixing in a similar way to that of a washer. APPLICATION:The large wafer head distributes the load on numerous types of PVCu sections requiring joining. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets too strong for the tip, the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. A self-drilling screw is similar to a sheet metal screw, but it has a drill-shaped point to cut through the substrate to eliminate the need for drilling a pilot hole. Designed for use in soft steel or other metals.Head: Wafer HeadFinish: Zinc PlatedSize: 4.8 x 60mmPack: Box 100
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every tub is supplied with a Torx® compatible bit.Size: 4.0 x 70mm.Pack quantity: 600.
This ForgeFix ForgeFast Torx® Compatible Wood Screw Pack contains a selection of the most popular sizes of professional, high performance multi purpose woodscrews. With a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power.The patented drill and drive thread reduce splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel.With an 'Elementech 400' coating providing an anti-corrosive metal finish which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours.Contains:1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 3.0 x 25mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 3.5 x 30mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 3.5 x 40mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 4.0 x 30mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 4.0 x 40mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 4.0 x 50mm.1 x Box of 200 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 50mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 60mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 70mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 80mm.1 x Box of 100 ForgeFast Torx® Compatible Wood Screws ZY 5.0 x 100mm.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.5 x 70mmThread: 42mm lengthPack Quantity: Box of 100
PSL Panel Heaters
Consort�s wireless control panel heaters are efficiently designed to provide energy savings and total comfort. The panel heaters are very slim and contemporary in design. They have strengthened grilles to increase durability. The wall mounting system features a new snap-on bracket which allows easy installation, cleaning and decorating.
0.5kW, 0.75kW, 1kW,1.25kW, 1.5kW or 2kW rating
Compatible with any Consort wireless controller
Very quiet operation
Automatic safety cut-out
Strengthened grille for increased durability
Splash proof to IP24 for use in bathrooms and other damp areas
Snap-on bracket for easy installation and decorating
LED light indicator
Fitted with 1.1m of supply cable
Finished in white
All wireless controllers are to be purchased separately.
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
The Knipex ErgoStrip® Universal Stripping Tool is used for the fast and precise dismantling and stripping of all common round and damp-proof installation cables (e.g. NYM cable 3 x 1.5mm² up to 5 x 2.5mm²), data cable (e.g. twisted pair) and coax cable. The innovative ergonomic pistol grip is designed for easy cutting, stripping and longitudinal cutting of the sheath. The conical slimmed down tool ends give better access in confined areas and there is a stripping device for cross-sections 0.2, 0.3, 0.8, 1.5, 2.5 and 4mm². It offers simplified insertion of single wires for stripping using location ridges, easy insertion of coax and data cable thanks to spring opening aid. Its multi-component design with a soft plastic zone allows for comfortable use and a secure grip. The housing is made from stable glass fibre reinforced plastic. Specification: Wire Stripping Capacity:- Round Cable: 8-13mmConductors & Stands: 0.2-4.0mmData Cable: CAT 5-7, Twisted Pair (UTP/STP)Coax Cable: 4.8-7.5mmOverall Length: 135mmWeight: 95g1 x Knipex ErgoStrip® Universal Stripping Tool - Left Handed
The Knipex 13-6 Series StriX Insulation Stripper with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from high-grade tool steel that has been forged and oil-hardened, multiple times. Chrome plated finish. The knurled screw and lock nut provide easy adjustment to the required diameter of solid or stranded wire. Also fitted with a shear blade for cutting copper cable up to 15mm (5 x 2.5mm²) and a bolted joint for precise operation with zero backlash. The pliers have a slim design for easy access. Ideal for single, multiple and fine stranded conductors with plastic or rubber insulation, max 5.0mm or resp. 10mm² cable cross section. Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11mm and 16mm). Specification Stripping Capacities: Diameter: 5mm/10mm², AWG: 7Length: 180mm
Knipex 8 Piece Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Made from special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. Supplied in a tool roll, made of hard-wearing polyester fabric with practical, adjustable quick release fastener. Contains: 1 x 48 11 J1 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 11 J2 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 48 21 J11 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 21 J21 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 49 11 A1 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 11 A2 External Circlip Pliers for Shafts Ø 19-60mm. 1 x 49 21 A11 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 21 A21 External Circlip Pliers for Shafts Ø 19-60mm.
Knipex StepCut Cable Shears for cutting multi-core stranded copper and aluminium cables. They can also cut solid copper and aluminium cables up to 5 x 4mm². Not suitable for steel wire and hard drawn copper conductors. Made from forged, oil-hardened special tool steel with a chrome plated finish. The cutting edges are additionally induction-hardened, approx. 56 HRC. Cuts without crushing. Noticeably less effort: the gradations cut wires one after the other; cutting is up to 40% easier than with standard cable shears of the same length. Its multi-component grips are VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The ergonomic handle design provides optimal cutting feel, even for larger cable diameters. A pinch guard prevents operators' fingers being pinched. Specifications: Cutting Capacity: Multi-core Stranded Copper/Aluminium Cables: 50mm²/ Ø 15mm.Length: 160mm.
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX1630135 are ideal for stripping, dismantling round PVC, rubber, silicone, PTFE cables from 6.0 - 29.0mm dia. There is a self-cocking holding lever to hold cable securley and a knurled nut for cutting depth adjustment. The Knipex KPX1630135 can be changed from circular to longitudinal cutting, simply by turning the tool body, and spiral cutting for longer stripping areas. knipex have made the body of the tool from shock-resistant plastic for added safety and the blade is changeable. Stripping capacities Ø 1/4 - 1 5/32 inchesLength 5 5/16 inchesWeight 4.2 ounces
Knipex 71 32 200 CoBolt Compact Bolt Cutters made with precision cutting edges for soft, hard and piano wire. Induction-hardened for added strength and durability, edge hardness approximately 64 HRC. An efficient joint design ensures exceptional cutting performance with little effort. They also have a gripping surface below the joint for gripping and pulling wires from Ø 1.0mm. A recess allows for easier cutting of thicker wires. Fitted with ergonomic multi-component grips for added grip and comfort. An opening spring and locking device are integrated in the handles for comfortable work and safe transport.Specification:Length: 200mm.Cutting Capacity: Medium-Hard Wire 5.2mm, Hard Wire 4mm, Piano Wire 3.6mm.
The Knipex Pen-Style Control Cabinet Key has four different key profiles, and can be utilised by swivelling the key holder. There is also a universal, magnetic 1/4in bit adaptor for standard bits, and an additional bit adaptor for 1/4in bits inside one key profile, easy to carry pen-style design with a fastening clip. Suitable for control cabinets, shut-off systems in the supply of gas, water and electricity. The key is also for technical installations within buildings, e.g. air conditioning and ventilation systems, shut-off valves, main switchboards, etc.. Supplied with 2 reversible bits: cross recess PH / slot 7.0 x 1.2mm and TX20 / TX25. Specification: Capacity: Square: 5.0/6.0/8.0mm, Double-bit Key: 3-5mm, Triangular: 9.0mm.
The Knipex 97 52 36 PreciForce® Crimping Pliers offer good repetitive, high crimping quality due to precision dies and integral lock (self-releasing mechanism). The crimping pressure has been set precisely (calibrated) in the factory, is re-adjustable and offers optimum transmission of force thanks to toggle lever for fatigue-reduced operation. The pliers have good handling thanks to their favourable handle position, low weight, compact design and ergonomically shaped handles. Made from special quality, oil hardened chrome vanadium electric steel. Applications: Insulated terminals and plug connectors.Capacity: 0.5 - 6.0 mm² AWG: 20-10.
These Knipex 7803ESD electronic super knips to discharge the electrostatic energy correspondingly slowly and under control to protect components at risk from thermostatic discharge. These precision pliers are ideal for ultra fine cutting work, eg: in electronics and fine mechanics. The small compact jaws can access confined spaces, while the precision ground cutting edges without bevel are ideal for flush cutting. These precision pliers have specially shaped tips that have a good clean cutting action from: 0.2 mm - 1.6 mm on soft wire and 1.0 mm on hard wire. They are jointed with a stainless steel rivet for added strength and will give a good smooth cutting action for a professional finish to yor workpiece. The Knipex 7803ESD knips are an all metal construction and have soft gripping handles, with two colour dual component sleeves. Length: 125 mm.
Knipex 87 Series Cobra® Quickset Hightech Water Pump Pliers are made from high-grade vanadium special tool steel, that has been forged and then oil-hardened, for a longer, robust working life. They combine the proven, reliable locking of the hinge bolt with an additional push function which makes it easier to work in very confined and inaccessible areas. The adjustment directly on the workpiece is possible by simply sliding the pliers handle. They offer reliable locking of the hinge bolt with the first workload. The gripping width of the pliers is then fixed and can only be adjusted by pressing the button. To re-activate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened again. Available with PVC or Multi-Component grips. SpecificationPipe Capacities R = Round H = Hex & Adustments;87 21 250: R: 50mm, H: 46mm, 25 Adjustments. 87 21 300: R: 70mm, H: 60mm, 25 Adjustments.87 22 250: R: 50mm, H: 46mm, 25 Adjustments.Knipex 87 22 250 Cobra® Quickset Water Pump Pliers Multi Component Grips
The Knipex Plastic Precision Tweexers, for gripping, holding and moving small objects, are manufactured from 30% glass fiber reinforced plastic for high strength, and flexibility. They have both high temperature, and excellent chemical resistance. The Tweexers grooved handles ensure optimum safe handling, and precision; with internally serrated tips, and a particularly wide clamping area. They are suitable for the chemical, pharmaceutical or cosmetics sector, food industry, and also for scientific use. Specification; 129mm.
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. These reciprocating blades are ideal for general purpose use in wood, metal, tough plastic and sandwich materials. The Universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2355QZ reciprocating blades are ideal for use in heavy guage metal, rubber, fibreglass and angle iron.
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 4.0mm.Working length: 43mm.Overall length: 75mm.
This Hultafors PRSS Short Tape has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. Type approved according to EU Class I.Hultafors Short Stainless Steel Tape PRSS 4m has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. It comes with a metal belt clip. Type approved according to EU Class I. Specifications: Blade Length: 4m. (Metric only).Blade Width: 19mm.
A professional 1/2in square drive Torx bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55 mm.Size TPX30
Highest quality assorter cases made of strong and durable polycarbonate for the professional. The design incorporates a double skin wall, superior hinges and a clear visibility lid. A reliable and secure one-handed locking mechanism in conjunction with a profiled lid ensures contents do not spill in transportation. Supplied with three identification tags for ease of retrieval and recognition. Box dimensions: 55mm x 421mm x 361mm.Contains 45 removable inserts of equal size.
The RIDGID Aluminium Straight Pipe Wrench has the same strength and durability as other RIDGID heavy-duty wrenches but are made from lightweight aluminium. That is nearly 40% lighter than the cast-iron wrench of the same size. The jaws are identical to the RIDGID heavy-duty wrenches.RIDGID Aluminium Straight Pipe Wrench Size: 600mm (24in)Capacity: 80mm (3in)Weight: 2.7kg
The Raaco 1248-01 Metal Cabinet has 48 drawers, each drawer can be divided into 16 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 48 x 150-01 (41 x 67 x 153mm).
These ForgeFix Don Quichotte Light Gauge Masonry Nails have the following specification: Size: 2.5 x 35mmFinish: Zinc GalvanisedPack Quantity: Box of 100
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600513R Ratchet Combination Spanner 13mmSize: 13mm.Length: 178mm.
The Bollé Safety CONTOUR Safety Glasses are protective glasses, which have a solid, comfortable and lightweight design. The frames have non-slip TIPGRIP temples, and an adjustable non-slip nose bridge. The lenses have an anti-scratch and anti-fog Platinum® Coating. Supplied with a microfibre pouch for storage.These Bollé Safety CONTOUR Safety Glasses have clear lenses. Approved for permanent wear and certified with perfect optical quality with anti-fog and anti-scratch coatings, 99.9% UVA/UVB protection. Specification Lens Type: Clear, Anti-Fog and Anti-scratch.Lens Conforms to: EN1661F/EN170-UV 2C-1.2.Frame Conforms to: EN166FT.
The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright green vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a green vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA Batteries1 x Quick Start Guide Specification: Level Accuracy: ±0.6mm/mWorking Range: 16mPower: 2 x AA Batteries (Supplied)Thread: 1/4in
The Stanley FatMax® Carbide Snap-Off Blades last up to 5x longer than conventional blades. They have a sharper, more durable cutting edge, meaning you spend less time changing blades. ONLY a carbide edge allows the rest of the blade to remain flexible (carbide is much more brittle than steel). Available sizes: 18mm and 25mm.1 x Stanley FatMax® Carbide Snap-Off Blades 25mm Pack of 5
The Stanley Tools Track Wall System is a simple and effective way to organise your garage or workspace. The system is customisable and adapts to any environment, thanks to the extreme versatility of supports and hooks. It enables the storage of tools, power tools and gardening accessories in an orderly manner, with the advantage of always having everything at hand. The Starter Kit consists of: 2 x 120cm Rails, 2 x S-Shaped Hooks, 2 x Short Hooks, 1 x Garden Tool Hook, 1 x Long Hook, 8 x Small Hooks and 4 x Closure Caps
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 9.0mm.Working length: 81mm.Overall length: 125mm.
ROCOL TUFLUBE Allweather is an extremely adhesive lubricant, designed for a wide range of applications, particularly operating in wet, humid conditions. Ideal for injector chains and BOP equipment. Highly resistant to water wash off, tenacious self repairing film and can be applied underwater. Temperature range -30°C to + 70ºC. Size: 400g.
Flexovit 1/2 sanding sheets are tough and durable sanding sheets, with heavy paper backing for longer life, they are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Suitable for use on wood, paint and metal. Size: 115 x 280mm.Packed in 10s
Flexovit powerfile sanding belts are made from tough and sharp high performance Aluminium Oxide making this product extremely durable, long lasting and suitable for use on a variety of surfaces. Suitable for use on wood, paint and metal. Size: 454 x 13mm.Packed in 4s
This IRWIN® Speedhammer Quad Drill Bit has the following specification: Diameter: 6.5mmOverall Length: 160mmWorking Length: 100mm The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.
