Bahco 1RM Series Ratcheting Combination Wrench with a 12-point Dynamic-Drive profile provides longer life for screws and nuts. Both ends are angled at 15 degree, the open end has a slimmer head for improved accessibility, whilst the ratchet ring end offers knuckle clearance and increased grip. They offer a 5 degree action angle with a switch for quick change of right and left direction. Made from high-performance alloy steel with a chrome-plated, micro-matt finish. All sizes feature large, bi-directional size markings for easy identification. Conforms to ISO 1711-1 and DIN 3113.1 x Bahco 1RM Ratcheting Combination Wrench 10mm
Bahco 370-4 Chain Strap Wrench with high strength, positive grip for tightening big tubes without the removal of the chain. Length: 300mm (12in).Capacity: 110mm (4 1/4in).
Bahco Flat Bit Extension Shaft is hardened and ground, lacquered for rust protection, and features two locking screws. One hexagonal key for fastening is included with each extension shaft.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: round bastard.Tanged.
The Bahco 396-JS is a foldable pruning saw with JS toothing designed for fruit growing, wine growing and landscaping. The blade has Hard Point teeth and extra wide gullet for faster cutting in thicker green branches and it has a strong two-component plastic handle with comfortable grip and a safety lock both in opened and closed positions. Length: 190mm.Weight: 200g.
Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-108-C Carded Size: 108mm.
The Bahco BAHCOFIT TORX Tip screwdrivers are suitable for TORX head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification.Specifications: Tip: TX20.Blade length: 100mm.Total length: 195mm.
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-32-400 Long Flat Bit 32mm
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 79 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 45mm.Colour : Brown.Pack : Clam pack of 1000.
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 24 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 110 mm (4.3/8 in). Blade length (B): 10mm (0.39 in). Head width (C): 10mm (0.39 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 0.8mm (0.03 in).Cutting Capacity: 0.1-1.0mm. Cutting edge: Ultra flush. The Ultra flush cutter virtually eliminates the pinch that other cutters make. The cutters configure two flat planes, with a barely discernible line separating each of these planar surfaces. They are perfect for use in close tolerance electronic and medical device assembly, where concerns about final lead-end configuration and mechanical shock transmission are a top priority.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand secondTanged
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 64 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
The Bahco 72 Quick Adjust Slip Joint Pliers with a black, anti corrosion treated finish. Made from high performance alloyed steel and fitted with 2-component handles for maximum grip & comfort. The jaws are heat treated for increased durability. 25 position settings with a self adjusting patented lateral lever and a flat and round grip shape with an auto-tightening device. Has a sturdy box jointed metal frame. They are designed to prevent finger pinching. Conforms to ISO 8976.The Bahco 7225 Quick Adjust Slip Joint Plier has the following specification: Length: 300mm.Capacity: 71mm.
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 3.2 mm (1/8in).Length: 125 mm (5in).
The Bahco 111M/SH5 is a set of 5 combination wrenches in metric sizes made from a high performance alloy steel in a patented U shape design. Their U shape shank provides better comfort with the open end angle being 15º with a slimmer head for better accessibility. The 12 point Dynamic-Drive Profile provides longer life for screws and nuts and the ring end angle is 15º for knuckle clearance and better grip. They have bigger and bi-directional size markings for easy identification and have a chrome plated Micro Matt finish which provides a high quality surface. Standards: ISO 691, ISO 7738, ISO 3318, ISO 1711-1 and DIN 3113. Sizes : 8, 10, 13, 17 and 19mm.
Bahco 1-106 series Hand files with Oberg cut are useful for all flat filing. The Oberg cut gives a high removal rate and smooth surface finish on most materials. The edges and surfaces are parallel. Surfaces single cut, bastard, with chipbreaking teeth. One edge single cut.Size 200mm (8in).
Bahco PG-57 Expert Telescopic Hedge Shears have handles made of silver aluminium tubes, that are extendable. The special locking system locks and unlocks with just a quarter-turn. The hedge shears have an exchangeable rubber buffer, comfortable bi-material grips made of orange polypropylene and soft black thermoplastic elastomer. Length: 790-1040mm. Weight: 1.34kg.
The Bahco Arbor Extension is a holesaw extension that gives extra reach in difficult to cut surroundings. Length: 330mm.Fits arbors 930 and 9100. Length: 330mm.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand smoothTanged
Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-102-C Carded Size: 102mm.
This Scan Safety Sign is made from 1mm self-adhesive durable PVC and printed using UV resistant inks. Should be applied to clean, flat/smooth surfaces. Complies with BS5499 and/or ISO 7010 design criteria where applicable.Helps limit company liability should an accident occur. Size: 200 x 50mm.Message: 'Not Drinking Water'.
This Bahco Pry Bar features both a crowfoot and precise end, both of which are useful for demolition work. Its short length makes it ideal for use in tight spaces. The bright orange finish is easy to spot on site.
Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-111-C Carded Size: 111mm.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 150mm (6in)Cut: flat smooth.Tanged.
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 20mmWorking Length: 155mmOverall Length: 230mm
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-22-400 Long Flat Bit 22mm
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm(10in)Cut: hand bastardTanged
The ABUS T84MB Series Padlocks have a solid brass body and shackle with non-corrosive inner components. Precision pin tumbler cylinder with a paracentric keyway for increased protection against. 30mm and above are double bolted. Automatic locking and anti-static, non-sparking for fuel lock off. Vinyl casing provides added protection for the body. 20-30mm padlocks are ideal for securing valuables/goods of lower value or at a low risk of theft. 40mm padlocks are ideal for securing valuables/goods of medium value or at an average risk of theft. Also useful as safety lock offs. Maintenance engineers can isolate valves or switch gear in the knowledge that the valve or switch gear cannot be activated until all engineers are clear of the system.This T84MB/40 Rustproof Padlocks has the following specification: ABUS Security Level: 4.Colour: Green. Shackle Width: 20mm.Shackle Height: 21mm.Shackle Diameter: 7mm. Overall Width: 43mm.Overall Height: 59mm.Overall Depth: 17mm.
The Marshalltown Aluminium Plasterer's Hawk is made from heavy gauge hard-rolled aluminium with smooth straight edges, rounded corners and a 95mm (3.3/4in) flange with extended hub that is threaded for the handle. Fitted with a detachable 125mm (5in) DuraSoft® handle. Also supplied with a sponge rubber callous preventer.1 x Marshalltown M6D Aluminium Plasterer's Hawk DuraSoft® Handle 350 x 350mm (14 x 14in)
The T Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hultafors Small T Block Combi Deadblow Hammer 238g (0.5lb)
The RIDGID 2017 Telescopic Basin Wrench has an innovative design that makes working with tap fittings and retaining nuts easier than ever. It has a built-in, water-resistant LED light, that provides direct illumination of your work, with auto-shut off for maximum battery life. The removable, 180° pivoting T-handle allows you easier access in tight spaces, whilst the 3/8in square drive connection lets you use your ratchet or breaker bar for additional leverage and maximum torque. The ergonomic, contoured grip overmold handle increases leverage and improves grip, while its new body/button design enables effortless telescoping, 240-425mm (10-17in). Specification Capacity: 12-32mm (1/2-1.1/4in).Length: 240-425mm (10-17in).Weight: 1.2kg (2.5lbs).
