The Moore & Wright Water Resistant Series Digital Caliper are fitted with a patented ceramic capacitive sensor and a large LCD display that offers 4 way measurement (mm/inch, absolute/incremental measurement). They can be zeroed at any point on the scale and is fitted with a conveniently located on/off switch. The calipers are manufactured to DIN 862 standards and water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm.
This Moore and Wright IP54 Water-Resistant Digital Caliper has the following specifications: Range: 0-300mm (0-12in). Accuracy: 0.04mm. Resolution: 0.01mm (0.0005in). Jaws: 60mm. Moore Wright Water Resistant Series Digital Callipers are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch.Manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications.Supplied with a CR2032 battery. 300mm (12in)
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 503 Spring Dividers have the following specifications: Size: 75mm (3in).
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 180 x 6.5 x 22.23mm
Everbuild Smart Tack is an advanced spray bonding system that outperforms and outdates conventional contact adhesives, providing significant performance and time-saving application benefits. Supplied in a standard aerosol can for smaller jobs and tricky areas such as edging, mitred joints etc. Offers the benefits of the smart tack system with lower pressure application. Based on new technology resins, providing very fine strands of 'high solids' adhesive that forms a web type pattern on application. Can be used for a multitude of uses in the shopfitting, furniture manufacture, laminating, joinery and exhibition industries. Size: 500ml.
The Hozelock Auto Reel has a 180° rotation which allows the Auto Reel to neatly park against the wall or follow you around the garden. The retraction speed controller ensures a safe and controlled retraction of the hose, only engaging when it is needed. This guarantees the hose will return back into the unit every time with no tangles or fuss. It has a convenient storage space for fittings and guns, it also includes a new feeder hose storage system which neatly stores the hose when not in use. There is also a leak free parking point for the hose which prevents drips when being stored. Fitted with a child lock, prevents the hose from being pulled out or retracted when engaged. Includes 20m of premium, anti-kink hose, ensuring water gets delivered to your garden with minimal fuss. Designed and manufactured in the UK with a 5 year warranty.1 x Hozelock 2403 Auto Reel 30m
The ForgeFix Tool Clips can be used in a wide variety of applications to store and display various items including tools, brooms, rakes, rods, pipes etc. They have a bright zinc plated finish.1 x Bag of 25 ForgeFix Tool Clips 3/4in Zinc Plated
The Unifix BSW Black Full Nuts are designed for reliable fastening in various applications. Made to BS 916 standards, these nuts ensure a secure fit and durability.
High-Quality Material: Crafted from robust materials for long-lasting use.
Standard Compliance: Meets BS 916 specifications for safety and reliability.
Versatile Use: Ideal for a range of fastening applications in construction and DIY.
Easy Installation: Designed for straightforward application with compatible bolts.
Secure Fit: Provides a tight grip to prevent loosening over time.
The Pressed Steel 910 Heavy Tee Hinge is designed for robust applications, providing reliable support for heavy doors. With a length of 450mm (18 inches), this hinge is perfect for both residential and commercial use.
Durable Construction: Made from high-quality materials for long-lasting performance.
Easy Installation: Designed for straightforward fitting, saving you time and effort.
Versatile Use: Suitable for a variety of heavy doors, including gates and sheds.
Corrosion Resistant: Finished in Bright Zinc Plated to withstand the elements and ensure longevity.
Strong Support: Provides excellent stability and strength for heavy-duty applications.
The Unifix Grade 1 UNF Full Nuts are designed for reliable fastening in various applications. Manufactured to BS 1768 standards, these nuts ensure durability and strength.
High-Quality Grade 1 Construction for Strength
Complies with BS 1768 Standards for Reliability
Suitable for 5/8"-18 UNF Threads
Bright Zinc Plated (BZP) for Corrosion Resistance
Ideal for Use in Mechanical and Structural Applications
This Wiha PocketStar has seven hex L-keys made of through hardened, Chrome-vanadium steel with an electro-plated finish. Stored in a handy, space-saving folding holder. The ergonomically shaped housing is made from reinforced fibreglass. An ingenious opening button allows the user to easily select the required key size. Choose your working postion, anywhere between 90 degree and 270 degree, depending on the screw fastening task at hand.In the 180 degree position, the tool is transformed into a screwdriver, for example. When the key is positioned on the 270 degree shoulder stop, it becomes a tool with a practical lever arm for high torques. It is also a clever solution for situations where users require just one single key to move in the work position since PocketStar stops the other keys from swinging back and getting in the way. Specifications: Sizes: 2, 2.5, 3, 4, 5, 6 & 8mm.
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 3/4 x 7 Box 200
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 65mm Bag Weight 500g
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 60 Bag 10
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 25mmThread: Fully threadedPack Quantity: Box of 1000
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 1.3/4 x 12 Box 200
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.Panel Pin Bright Finish 20mm Bag Weight 250g
These ForgeFix Multipurpose Galvanised Clout Nails are suitable for use with both softwood and hardwood. They have a slightly larger head that distributes the load directly underneath the top of the nail. Thin sheeting will stay firm and secure. They have a galvanised finish, which results in increased durability. Used in many joinery, construction and roofing applications.These ForgeFix Multipurpose Clout Nails have the following specification: Size: 40mmGauge: 2.65mmFinish: GalvanisedBag Weight: 2.5kg
Main Product Description:
The FloPlast Round 50mm Downpipe Shoe is a practical and easy-to-install component designed to direct rainwater from a 50mm round downpipe into a drain or gully. Made of tough and durable PVCu material, it conforms to BS EN 12200-1 standards and features a simple push-fit connection for quick installation. Suitable for use with MiniFlo gutter systems, this downpipe shoe forms part of a larger 50mm round downpipe system, offering a cost-effective solution for smaller installations like sheds, garages, and conservatories.
Additional Features and Benefits:
- Designed to work with MiniFlo rainwater systems
- Ideal for small roof areas such as sheds, conservatories, greenhouses, and carports
- Provides a non-conductive alternative to metal systems for lightning protection
- Durable and lightweight, making it easier to install
- Withstands normal ladder weight
- Offers a high gloss finish with a blemish-free surface for improved weathering and colorfastness
- Available in various colors to complement different architectural styles
- Compatible with other FloPlast products for comprehensive rainwater management solutions
Discover the durability and reliability of our Annular Ring Shank Nails Bright, designed for various construction and DIY applications. These nails are perfect for ensuring a strong hold in wood and other materials.
High-Quality Bright Finish: Provides excellent corrosion resistance.
75 x 3.75mm Size: Ideal for a variety of construction projects.
Annular Ring Shank Design: Enhances grip and reduces the chance of pull-out.
Sold by Weight: Conveniently ordered in kilos for your specific needs.
Versatile Use: Suitable for both professional and DIY applications.
The Radiator Vent Key is designed for easy access to radiator valves, allowing for efficient maintenance and bleeding of radiators. This essential tool is perfect for both DIY enthusiasts and professionals.
Easy to Use: Designed for quick and simple operation.
Durable Construction: Made to withstand regular use.
Compact Size: Convenient to store and carry.
Versatile Application: Suitable for various radiator types.
Essential for Maintenance: Helps prevent radiator issues by allowing for proper bleeding.
The Pressed Steel 121M Medium Tee Hinge Bright Zinc Plated is designed for durability and strength, making it ideal for various applications including doors and gates. With a length of 610mm (24 inches), this hinge provides reliable support and functionality.
High-Quality Bright Zinc Plated Finish: Ensures resistance to corrosion and wear.
Medium Tee Design: Offers enhanced stability for heavier doors.
Easy Installation: Designed for straightforward fitting with standard tools.
Versatile Use: Suitable for both residential and commercial applications.
Durable Construction: Built to withstand daily use and environmental factors.
The Unifix Self-Tapping Screws are designed for easy installation in wood and metal applications. With a Pozi pan head and a durable Bright Zinc Plated finish, these screws provide excellent grip and corrosion resistance.
High-Quality Bright Zinc Plated Finish for Durability
Self-Tapping Design for Quick Installation
Pozi Pan Head for Enhanced Torque
Ideal for Wood and Metal Applications
Size: 14G x 1.1/4" (6.3 x 32mm)
The Teng ACCSDA1412 Adaptor is for use with standard and impact sockets, etc. on electric and rechargeable screwdrivers (not impact tools). Designed for use with the most common machine fittings. Size: 1/4in Hex to 1/2in SquareLength: 50mm
The Bond-It Multi-Mate General Purpose Silicone Sealant is a versatile solution for all your sealing needs. This translucent sealant is perfect for both indoor and outdoor applications, providing a strong, flexible bond.
High-Quality Silicone: Ensures durability and flexibility.
Translucent Finish: Blends seamlessly with various surfaces.
Easy Application: Designed for quick and hassle-free use.
Multi-Purpose: Suitable for a wide range of sealing tasks.
Size EU3: Convenient size for both small and large projects.
Quantity: Box of 25
Discover the reliability of Binx Mild Steel All Metal Lock Nuts Bright Zinc Plated - M5, designed for secure fastening in various applications. These lock nuts ensure a tight grip, preventing loosening over time.
Durable Mild Steel Construction: Offers strength and longevity.
All Metal Design: Ensures maximum locking capability.
Bright Zinc Plated (BZP): Provides corrosion resistance for outdoor use.
Easy Installation: Compatible with standard M5 bolts for quick setup.
Versatile Application: Ideal for automotive, construction, and DIY projects.
Quantity: Box of 1000
Discover the reliability of Binx Mild Steel All Metal Lock Nuts Bright Zinc Plated - M3 (Box of 1000), designed for secure fastening in various applications. These lock nuts ensure a tight grip, preventing loosening due to vibration.
Durable Mild Steel Construction for Longevity
All Metal Design for Enhanced Strength
Bright Zinc Plated (BZP) Finish for Corrosion Resistance
Self-Locking Mechanism for Secure Fastening
Ideal for Use in Automotive and Industrial Applications
The Alpen High Speed Steel (HSS) Drill Bit is designed for precision drilling in various materials. With a diameter of 9.0mm and a length of 125mm, this drill bit is perfect for both metal and wood applications.
High Speed Steel Construction for Durability
9.0mm Diameter for Versatile Use
125mm Length for Deep Drilling
Ideal for Metal and Wood Applications
Compatible with Standard Drill Chucks
Box of 10 for Bulk Use
The Alpen High Speed Steel (HSS) Drill Bit is designed for precision drilling in various materials. With a size of 3.5 x 70mm, it offers durability and efficiency for both DIY enthusiasts and professionals. This product comes in a box of 10.
High Speed Steel Construction for Enhanced Durability
Ideal for Drilling in Metal and Wood
Precision Ground for Accurate Holes
Compatible with Standard Drill Chucks
Perfect for Both DIY and Professional Use
Discover the Abracs Waterproof Paper Sheets, designed for effective wet sanding. Measuring 230 x 280mm with a fine 800 grit, these sheets are perfect for achieving a smooth finish on various surfaces.
High-Quality Abrasive: Made for durability and efficiency.
Ideal for Wet Sanding: Perfect for use with water to reduce dust.
Versatile Size: 230 x 280mm sheets suitable for various applications.
Fine Grit: 800 grit for a smooth finish on wood, metal, and more.
Easy to Use: Compatible with hand sanding or sanding blocks.
Quantity: Box of 25 sheets for ample supply.
Discover the Abracs Waterproof Paper Sheets, designed for effective wet sanding. Measuring 230 x 280mm and featuring a 400 grit, these sheets are perfect for achieving a smooth finish on various surfaces. Available in a box of 25 sheets.
High-Quality Waterproof Material for Durability
Ideal for Wet Sanding Applications
Perfect Size of 230 x 280mm for Versatile Use
400 Grit for Fine Finishing
Compatible with Various Surfaces
The Alpen High Speed Steel (HSS) Drill Bit is designed for precision drilling in various materials. With a diameter of 3.2mm and a length of 65mm, this drill bit is perfect for both metal and wood applications.
High Speed Steel Construction for Durability
Precision Ground for Accurate Drilling
Ideal for Use in Metal and Wood
3.2mm Diameter for Versatile Applications
Length of 65mm for Deep Drilling Needs
Box of 10 for Bulk Use
Discover the Abracs Waterproof Paper Sheets, designed for effective wet sanding. Measuring 230 x 280mm and featuring a 320 grit, these sheets are perfect for achieving a smooth finish on various surfaces. Available in a box of 25 sheets.
High-Quality Abrasive: Made for durability and efficiency.
Ideal for Wet Sanding: Perfect for use with water to reduce dust.
Versatile Size: 230 x 280mm sheets suitable for various applications.
320 Grit: Fine grit for achieving a smooth surface finish.
Easy to Use: Compatible with standard sanding tools.
The Alpen High Speed Steel (HSS) Drill Bit is designed for precision drilling in various materials. With a size of 3.0 x 61mm, it is perfect for both metal and wood applications. This product comes in a box of 10.
High Speed Steel Construction for Durability
Precision Ground for Accurate Drilling
Ideal for Use in Metal and Wood
3.0mm Diameter for Versatile Applications
61mm Length for Deep Drilling Needs
Box of 10 for Bulk Use
The Abracs Proflex Flat Metal Cutting Disc is designed for precision cutting of metal materials. With a diameter of 115mm and a thickness of 3mm, this disc is perfect for both professional and DIY applications.
High-Quality Construction: Made from durable materials for long-lasting performance.
Versatile Use: Suitable for cutting various types of metal.
Easy to Install: Designed for quick and hassle-free attachment to compatible tools.
Precision Cutting: Provides clean and accurate cuts for professional results.
Compatible Size: Fits standard 22mm arbor for easy integration with most cutting tools.
Quantity: Comes in a box of 25 discs for ample supply.
The Abracs Proflex Flat Metal Cutting Disc is designed for precision cutting of metal materials. With a diameter of 230mm and a thickness of 3mm, this disc is perfect for both professional and DIY applications.
High-Performance Cutting: Engineered for efficient metal cutting.
Durable Construction: Made to withstand heavy-duty use.
Compatible Size: Fits standard 22mm arbor for easy installation.
Versatile Use: Ideal for various metal types including steel and aluminum.
Professional Quality: Trusted by tradespeople for reliable performance.
Quantity: Box of 25 discs for ample supply.
