Bosch GLI 18V-2200 C Cordless Jobsite with a powerful LED, capable of producing up to 2,200 lumens for superior lighting conditions. It has two brightness settings, five flexible adjustment angles and a 5/8in tripod thread, allowing for quick adaptation to any work situation. The floodlight is splash-proof and dust-tight due to an IP 64-rated, robust battery cover. A Bluetooth connectivity module which offers convenient remote control and lighting adjustments via the MyTools tile in the Toolbox app. This floodlight is excellent for lighting up entire working areas for a full working day. Comes as a Bare Unit, NO battery or charger in a cardboard box. Compatible with all Bosch Professional 18V batteries, including ProCORE18V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance. Specifications: Luminous flux: 2,200 lm.Number of Brightness Levels: 2.Weight: 1.9kg excl. battery.
Bosch PRO Metal Sandwich T718BF Jigsaw Blades are a great choice for construction workers and installers who need a long-lasting jigsaw blade to cut through metal sandwich. It has a high-speed steel (HSS) tooth strip and a more elastic high-carbon steel (HCS) body to ensure it won’t break when cutting multi-layered panels. Its milled, wavy-set, and fine-pitched teeth help you get straight cuts in workpieces up to 120mm thick.Cutting metal sandwich requires a jigsaw blade that’s not only strong, but also long enough to cut through hard, multi-layered material. Like the durable PRO Metal Sandwich T718BF. We made it 180mm long to help you cut through metal sandwich with ease – time and again. Fits all T-shank jigsaws.Specifications:Length: 180mmTooth Spacing: 2mmPack Qty.: 5
The Bosch SDS plus-5 Hammer Drill Bits are for effortless drilling in concrete. The Activeteq centring tip offers drill guidance for easy starts without jarring or wandering. AWB brazing and hardening technology reduces vibration and strain on the user.To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. Compatible with SDS plus rotary hammers. Made in Germany.
1 x Bosch SDS plus-5 Hammer Drill Bit 6 x 400 x 465mm
The Bosch PRO SDS plus-5X Hammer Drill Bits are made from an embedded cross of high-quality tungsten carbide, the 4-cutter head offers convenience to professionals who need to drill accurate holes in reinforced concrete. Its 4 flutes channel dust away from the impact point, ensuring effective and long-lasting performance. Reinforced concrete is a common material in infrastructure, commercial and domestic construction, and workers such as electricians, plumbers or HVAC installers often need to drill into it. PRO SDS plus-5X Hammer Drill Bits are designed for this tough task.
1 x Bosch PRO SDS plus-5X Hammer Drill Bit 6.0 x 100 x 160mm
The Bosch PRO Multi Material Demolition Blade helps you get demanding demolition jobs done. Robust design, combines hard teeth and flexible body through bi-metal welding. The advanced Bosch Vario tooth design ensures a more efficient cutting action, for smooth cuts and longevity. Fits all S-shank reciprocating saws.
Pack of 5 Bosch PRO Multi Material Demolition S1210VF Blades 300mm 5-8 TPI
The Bosch S 1122 BF Flexible for Metal Reciprocating Saw Blade is optimised for flush cutting in metal. BIM for cutting regular-strength steel materials. Its tooth pitch of 1.8mm ideal for cutting pipes and profiles with a wall thickness of 3mm to 8mm. Fits all S-shank reciprocating saws.Specifications:Overall Length: 225mmMax. Cutting Capacity: 175mmTPI: 14
Pack of 100 Bosch S 1122 BF Flexible for Metal Reciprocating Saw Blade 225mm 14 TPI.
The Bosch EXPERT AIZ AIT MetalMax Plunge Cut Blade makes a perfect flush cut, even on hardened metal. It offers outstanding longevity thanks to Bosch's Carbide Technology. The extra coating makes the carbide tougher. A Starlock mount provides optimum power transfer and convenient blade change within 3 seconds.The perfect accessory for the tradesman wanting to cut tough materials with a multitool.
This Bosch EXPERT AIZ 32 AIT MetalMax Plunge Cut Blade has the following specifications:Width: 32mmImmersion Depth: 40mmPackaging Type: Paper / Cardboard / Corrugated board - Packaging, box, no Euro holePack Quantity: 1
The Hultafors Deep-Hole Marker is ideal for marking in hard-to-reach places and narrow holes. Permanent ink for use on most materials and surfaces. Available in red or black.1 x Hultafors Ink Deep-Hole Marker Black
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC20 Scandinavian Butt Chisel. Blade: 20mm.Overall Length: 232mm.
The Dog's B*ll*cks Multipurpose Adhesive & Sealant can be used on almost all interior and exterior projects. It has an advanced hybrid formula, making it waterproof, UV and mould resistant. Will stick and seal to almost any building material, even wet surfaces, making it suitable for nearly every task. From sticking new skirting boards to repairing your leaky gutter, this sealant can do the job of all the other cartridges in your tool bag. It can also be overpainted, used as a gap filler or caulk and is solvent-free.1 x Evo-Stik The Dog's B*ll*cks Multipurpose Adhesive & Sealant, Crystal Clear 290ml
The Unifix Class 6 Serrated Flange Nuts DIN 6923 Bright Zinc Plated - M5 x 0.80 (Box of 4000) are designed for reliable fastening in various applications. These nuts feature a serrated flange that provides enhanced grip and stability.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Serrated Flange Design for Improved Grip
Compatible with M5 x 0.80 Bolts
Ideal for Use in Structural Applications
Easy to Install and Secure
Forgefix TechFast Metal Roofing Panels to Timber Hex Screws are used to join metal roofing panels to timber frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. No pre-drilling is required and the self-drilling T17 Gash Point on screws makes for a rapid installation. The nails are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Metal Roofing to Timber Screws have the following specification: Size: 6.3 x 25mmSteel Thickness: 0.5-1.2mmHead Type: 8mm HexPack Size: 100
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 5.0 x 70mmThread: 42mm lengthPack Quantity: Box of 300
These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads have a zinc finish for increased durability.The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications.APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types.Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Supplied in a handy ForgePack.
ForgePack of 10 ForgeFix Multi-Purpose Pozi Screws CSK ST ZP 5.0 x 40mm
ForgeFix TechFast Window Baypole screws are self-drilling screws which are suitable for joining bay window and other metal reinforced PVCu sections. They have a wafer head with TORX® compatible recess. Their No.3 drill tip allows self-drilling into steel up to 4mm.These screws are fire resistant and are protected by 'Elementech' corrosion resistant coating, which has been salt spray tested to 1000 hours. They comply with EU safety, health and environmental requirements. TX25 impact bit included.Size: 4.8 x 60mmPack: Box of 100
Need to securely connect three pipes of the same size? If you’re using the JG Speedfit push-fit system, you’ll need these equal tee connectors – they can be used with plastic or copper pipes, and it's a far faster way of connecting than using traditional methods.
Installation is simple – you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it.
• Install or demount in seconds, without the need for tools
• Suitable for hot and cold water services
• Can be used on central heating systems and combi systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0215W
Warranty (years) 50
Diameter (mm) 15
Pack Size 2
Fitting Type Tee
Equal or Reducing Equal
Need to securely connect three pipes of the same size? If youÕre using the JG Speedfit push-fit system, youÕll need these equal tee connectors Ð they can be used with plastic or copper pipes, and it's a far faster way of connecting than using traditional methods. Installation is simple Ð you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it. ¥ Install or demount in seconds, without the need for tools ¥ Suitable for hot and cold water services ¥ Can be used on central heating systems and combi systems ¥ Minimum operating temperature of 20¡C ¥ Maximum operating temperature of 105¡C ¥ 12 bar maximum operating pressure at minimum temperature ¥ 3 bar maximum operating pressure at maximum temperature ¥ 50-year manufacturerÕs guarantee (T&Cs apply) ¥ Manufactured to BS EN 7291 Parts 1, 2, 3 and S ¥ WRAS-approved ¥ Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0215W Warranty (years) 50 Diameter (mm) 15 Pack Size 2 Fitting Type Tee Equal or Reducing EqualPack of 4
Spectre & trade; Advanced Coach Screws are three times faster than a regular coach screw. They have a hex flange head and 60-degree deep single thread. The quick start type 17 slash point eliminates the need for a pilot hole in most cases, some hardwood may still need pre-drilling. They have been surface hardened with anti-corrosion Zinc Yellow coating for increased durability. Socket driver included. UKCA/CE approved for use in load-bearing timber construction.Box of 50 ForgeFix Spectre & trade; Coach Screw Hexagon Head ZY M10 x 80mm.
These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 5/8 x 6 Box 200
Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 5.5 x 120mmClamping Thickness: 100mmEffective Thread Length: 99mmPack Size: 50Drill Tip: No.3 No.3 drill tip for self-drilling heavy gauge steel up to 5mm
The Airmaster Air Purifier has a H13 True HEPA Filter with status indicator. A 4 colour LED display shows air status and quality. It replaces air in the room 3 times per hour. 3 modes (Auto, Turbo and Silent). The silent mode with light off function allows for quieter unobtrusive running. Suitable for rooms 20-27m². Specifications: Input Voltage: 220-240V (50Hz).Output Rating: 22W.Dimensions: 240 x 382mm.Cable Length: 1.8m.Weight: 2.8kg.
Spectre & trade; Advanced Coach Screws are three times faster than a regular coach screw. They have a hex flange head and 60-degree deep single thread. The quick start type 17 slash point eliminates the need for a pilot hole in most cases, some hardwood may still need pre-drilling. They have been surface hardened with anti-corrosion Zinc Yellow coating for increased durability. Socket driver included. UKCA/CE approved for use in load-bearing timber construction.Box of 100 ForgeFix Spectre & trade; Coach Screw Hexagon Head ZY M6 x 100mm.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 150mmInsulation Thickness: 63-129mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
The ForgeFast Decking Screws Countersunk TORX® T25 are suitable for fixing into softwood or hardwood. They have a deep TORX® compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn and the recessed under-head ribs provide superb countersinking. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35mm, reducing likelihood of screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.ForgeFast Decking Screws Countersunk TORX® T25 Size: 4.5 x 60mmPack Size: Tub of 500Finish: Green elementech 2000
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. They are galvanised for increased durability.Available in standard sizes, from 25mm to 150mm. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Round Head Nail Galvanised Finish 125mm Bag of 500g
The Starrett KDC10021 Deep Cut Bi Metal Deluxe Electrician's Holesaw Kit is suitable for all tradesmen, installation engineers, industry generally and the DIY enthusiast, Starrett kits feature a range of saws with sizes selected specifically to suit the relevant application. Packed in a sturdy EVA carrying case, these kits will be an invaluable addition to any toolbox. Contains: 10 x Holesaws: 20, 22, 25, 29, 35, 44, 51, 64, 68 & 76mm.2 x Arbors: A1 and A2.
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 65 Bag 10
These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads have a zinc finish for increased durability.The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications.APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types.Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Supplied in a handy ForgePack.
ForgePack of 10 ForgeFix Multi-Purpose Pozi Screws CSK ST ZP 5.0 x 70mm
Meridian Circular Drum Bulkhead with a black polypropylene base and opal polypropylene diffuser. Suitable for outdoor use, weather-resistant IP44 rating. Requires a B22 light bulb, max. rating of 100W (not supplied). Fully compatible with LED lamps. Specification: Input Voltage: 240V - 50HzMax. Wattage: 100WBulb Fitting: B22Dimmable: NoIngress Protection: IP44Dimensions: 240 x 240 x 120mm
The Unifix Class 6 Square Roofing Nuts Bright Zinc Plated are designed for secure fastening in roofing applications. With a size of M5 x 0.80, these nuts provide reliable performance and durability.
High-Quality Bright Zinc Plated Finish: Ensures corrosion resistance and longevity.
Class 6 Strength: Suitable for various roofing projects.
Easy Installation: Designed for quick and efficient use.
Pack of 5000: Convenient quantity for multiple applications.
Versatile Use: Ideal for both DIY and professional roofing tasks.
The Unifix Class 6 Full Nuts DIN 934 Galvanised 0.3mm - M10 x 1.50 (Box of 1200) are designed for reliable fastening in various applications. Made from high-quality galvanized steel, these nuts provide excellent corrosion resistance and durability.
High-Quality Galvanized Steel: Ensures long-lasting performance and resistance to rust.
Class 6 Strength: Suitable for heavy-duty applications requiring robust fastening.
Standard DIN 934 Design: Compatible with a wide range of bolts and screws.
Easy to Install: Designed for quick and efficient assembly in various projects.
Versatile Use: Ideal for both DIY enthusiasts and professional tradespeople.
