Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument Drain Test Plug is suitable for blocking off small pipes such as copper for dry testing prior to commissioning. It cannot be used for air testing purposes by itself. Diameter range: 37-45mm. Maximum allowable back pressure: 60psi (4bar).
Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3 and 4-inch versions. These plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob, this will depress the rubber cone, this will make it expand to seal pipe or tube end with a water tight seal. Used for blocking off drain pipes. Fitted with removable top caps and rubber rings.Monument 1378Z Drain Testing Plug. Size: 100 mm (4 in).Capable of sealing against pressures of up to 1.97 bar / 29 psi.
The Sylglas waterproofing tapes are self-adhesive, flexible and used for general waterproofing and sealing jobs around the home and garden. Uses include:Sealing exposed glazing bars on conservatories, greenhouses and cold frames.Sealing and repairing gutters and down pipes.Waterproofing of insulation or pipe lagging. Protection of above ground metal and garden tools from corrosion.The Sylglas SYLWT100 waterproofing tape has the following dimensions:Size: 100mm wide4 metre rolll
The DEWALT 50mm Impact Torsion & Magnetic Screwlock Sleeve Sets The impact bits that have a 15° torsion zone that allows the screwdriver bit to flex rather than breaking and the Full Fit head prevents the rounding of the screw head and prevents 'cam out' (bit head slipping out of screw head due to the turning force). The Magnetic Screwlock enables tasks to be completed quicker and easier, reducing instances of dropped or lost screws.DEWALT Impact Torsion 2 x PH2 50mm and Magnetic Screwlock Sleeve.
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer tackers using 140, T50, G type staples. Compatible with Tacwise A14014V.Size: 10mm.Pack quantity: 2000.
Rapid VR16 hog rings are designed for use with the Rapid FP20 and FP216 Fence Pliers. 1.3mm diameter steel. Fix to wire from 2 to 8mm diameter. Please check your fence pliers for compatible sizes. Available in galvanised or green coated steel.1 x Pack of 1,390 Rapid VR16 Fence Hog Rings Galvanised
Rapid No. 13 precision cut fine wire staples are made from high-performance stainless steel for strength and durability. The thin wire makes the fixed staple almost invisible, ideal for craft and textiles where the staple will have minimal effect on the fibres. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 13 (stainless steel).Size: 6mm leg lengthQuantity: 2,500. For use with the Rapid MS610, R13, R83, R23, R30, R33, MS813, R19, ESN113 and R213 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 12mm leg length.Quantity: 5,000. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.
The Lessmann Steel File Cleaning Brush is ideal for for cleaning wood and metal files. The file card is glued to the wooden body. Length: 250mm.Filling Surface: 115 x 38mm.
The Bosch Standard for Metal Cutting Disc cuts reliably through metal. This aluminium oxide disc is designed for general use with metal. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.Specifications:Diameter: 115mmThickness: 1.0mmBore: 22.23mm
The Red Gorilla one-piece plastic Gorilla Shovel™ is made from very thick, high-quality polypropylene that is UV and frost-resistant. As such, it will not rust and is non-sparking. Designed for builders, it can withstand any task in any weather. Lightweight yet strong, it is perfect to use for debris, rubble and sand. The weather resistant properties also make it ideal for farm, agricultural, equine and garden use. Length: 101cmBlade Width: 31cmWeight: 1.2kg1 x Red Gorilla One-Piece Gorilla Shovel™ Red
Designed for Tradesmen, this bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention. The 0-16-130 chisel set contains:4 x 5002 Wood chisels 6mm (1/4 in), 12mm (1/2 in), 18mm (3/4 in) and 25mm (1 in).1 x Carry Case.1 x Oil.1 x Sharpening stone.
The Red Gorilla Complete Gorilla Broom® has been designed with unique features to make your job easier. Fitted with an integrated scraper blade, makes removing ‘stuck bits’ even easier. The anti-clog channel cuts down flying dust for a clean sweeping action. The extra wide head means you can shift more with minimal effort. Ideal for use in wet environments, as the non-porous polymer head and bristles won't absorb any fluid. Excellent to use on various floor types: rubber, hard and decking. Made from UV and frost-resistant materials, meaning it can be kept outside all year without fading or cracking.1 x Red Gorilla Complete Gorilla Broom® Yellow 50cm
The Gorilla Waterproof Coat & Seal is a flexible, rubberised coating sealing out water, air and moisture. Perfect for repairing leaks, the liquid is easy to apply – you simply brush it, roll it or pour it. The self-levelling formula seals and protects by smoothly covering small gaps and cracks to create a weatherproof, watertight seal. Great for: roofing, gutters, drainage pipes, external chimneys, conservatories, windows, uPVC, caravans.
1 x Gorilla Gorilla Waterproof Coat & Seal Clear 473ml.
These Forgefix High Tensile Hex Head Bolts are made from 8.8 grade steel. The bolts are part threaded and conform to DIN 933 standards. The hexagonal head has been designed for use with spanners or sockets and offers maximum torque when used with these tools. APPLICATION:For fastening together numerous types of material or to be fastened into pre-tapped holes. Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrityHigh Tensile Bolts ZP M10 x 80 Bag 10
The Bulldog Snow Shovel is the perfect tool for scooping up snow in winter and leaves in autumn. It has a strong, plastic D-handle and a lightweight aluminium shaft with soft grip, to ensure comfort even in cold weather. The wide, tough plastic moulded blade features a metal edge for breaking and scraping ice. Specification: Length (Handle to Blade Tip): 135cmBlade Size: 31.5 x 45.5cmScoop Depth: 12cm
Main Product Description: The FloPlast Push Fit Waste 90Degree Knuckle is a high-quality plumbing component designed for use in waste piping systems. It offers easy installation and durability, making it an ideal choice for various applications. Available in different sizes, including 32mm, 40mm, and 50mm, the knuckle bend ensures seamless connections and efficient water flow within your plumbing network.
Features:
- Easy Installation: The push-fit design allows for quick and hassle-free installation without the need for additional tools or adhesives.
- Durable Materials: Constructed from robust materials, the FloPlast Push Fit Waste 90Degree Knuckle is built to withstand the demands of plumbing systems.
- Versatile Sizing: Available in various sizes, including 32mm, 40mm, and 50mm, this knuckle bend caters to a range of pipe diameters.
- Grey Color Option: The 50mm size is exclusively available in grey, providing a neutral color choice for your plumbing system.
Benefits:
- Enhanced Performance: The FloPlast Push Fit Waste 90Degree Knuckle contributes to improved water flow and overall system efficiency.
- Time-Saving Installation: The push-fit design simplifies the installation process, saving time and effort.
- Robust Construction: The durable materials ensure the knuckle bend can withstand the rigors of plumbing applications.
- Versatile Compatibility: The availability of different sizes and color options allows for compatibility with various pipe diameters and aesthetic preferences.
The Knipex Protective Jaws are ideal for protecting round workpieces from marring or scratching. The Jaws also prevent any damage by covering all of the teeth on the tool and provide a smooth gripping surfaces. 3 pairs supplied.
The Starrett SB6-A Reciprocating Blade Kit contains a selection of unified shank 3X POWER Bi-Metal reciprocating blades. They provide up to three times the life and increased cutting rates compared to our previous line, setting a new level for performance and value on the market. With an optimised tooth pitch for a reduction in vibration, offering cleaner cuts and less fatigue. They are unbreakable; providing safety and reliability. Contains: 1 x B66 Wood Cutting Blade 152 x 19 x 0.89mm, 6 TPI1 x B610 Multipurpose Blade 152 x 19 x 0.90mm, 10 TPI1 x B614 Metal Cutting Blade 152 x 19 x 0.90mm, 14 TPI1 x B618 Metal Cutting Blade 152 x 19 x 0.90mm, 18 TPI1 x B624 Metal Cutting Blade 152 x 19 x 0.90mm, 24 TPI
The Flexipads Wool Bonnet is made from ultimate Merino sheepskin wool, which has a unique double skin, making it very long-lasting. It is a professional, world-renown bonnet used by prestige car manufacturers. With GRIP fastening. Made in Great Britain. Specification: Wool Pile: 20mmMax. Speed: 2,500 rpm1 x Flexipads World Class GRIP Wool Bonnet 50mm
John Guest push-fit acetal two way divider fitting splits supply to two equal supply feeds. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65oC max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65oC max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
The DEWALT Multi-Tool Blade is a flexible scraper blade for surface removal of a wide range of materials. The blade is ideal for the following applications:Removing floor tile adhesives.Removing sealants around baths and sinks. Blade width: 35mm.
The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools. Overall Length: 155mm (6in).
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4, 11 or 140. Fits Stanley: 69-809, FMHT0-74997, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.1 x Pack of 1000 Stanley TRA709T Heavy-Duty Staples 14mm
The STANLEY Essentials Cantilever Toolbox features a 3 tier compartment system that unfolds as the box is opened, allowing for hassle-free access to contents. There are two organiser compartments built within the top of the lid that can be used to store small parts. Fitted with an ergonomic handle and secure metal front latches for easy opening and closing of the lid. A top padlock eye has been included to keep your items safe and secure. Designed for DIYers and anyone that would require customised storage around the home. Specification: Dimensions: 490 x 285 x 255mmMax. Load: 22kg
This single pinion hand drill has an aluminium gear wheel.It has a 3-jaw self centring chuck 5/16in (8mm), a black japanned finish,and is fitted with comfortable plastic handles.
150mm Extractor Fan Standard
_This model is designed for simple switching on / off from a separate switch, e.g. light switch or spur unit (not supplied). It does NOT have a run-on timer. Normally used in a kitchen / utility or large bathroom (outwith zone 2) location.
_Mains 230/240V AC 50HZ. Power consumption: 25 watts.
_Extraction rate 68 litres per second, 245 cubic metres per hour
_Airvent is part of the Vent Axia group. IP22 rated. CE approved
_Dimensions: 225mm wide x 218mm tall x 46mm deep (beyond installed surface). 145mm diameter spigot, extends for 110mm. For connection to 150mm / 6 inch ducting
The Big Wipes Van & Wall Bracket which allows Big Wipes tubs to be kept close to hand. Simply push the tub into the bracket, tighten and it’s ready to dispense. The bracket enables ‘one-handed dispensing’ for very messy jobs and means no more looking for your tub of Big Wipes. Van mountable - fixes to ply panelling or integrates easily into a bespoke racking system. Wall mountable - keep close by in garage or workshop. Manufactured in robust high quality polycarbonate.
Enhance your plumbing installations with the McAlpine BSP female to BSP male coupling. Crafted from durable polypropylene, this compact 2 Inch length fitting offers a secure, leak-free compression connection—ideal for extending trap height in domestic and commercial settings. It is part of McAlpine's Multifit range, which is designed to be compatible with a variety of pipe materials and sizes.Key Features & Benefits:
Versatile BSP Compatibility – ideal for standard UK sink, basin, bath, and waste trap assemblies
Space-Saving Design – Only 2 Inch long, perfect for tight spaces where extended trap height is required
Robust Polypropylene Build – High-grade, corrosion‑resistant material ensures long-lasting performance and dependable sealing
Quick & Easy Installation – Compression-style coupling fits straight into existing BSP threaded waste systems without additional tools
Trade-Proven Quality – McAlpine’s Plastic & Chrome Fittings range is designed for professional plumbers and DIY enthusiasts alike
The McAlpine CONFLEX-200 is a flexible connector that is designed to connect a condensing boiler to a rigid (19/23mm) or flexible (25mm) condensate discharge pipe. Like the CONFLEX-300, the CONFLEX-200 is also designed to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
The CONFLEX-200 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. The connector is constructed with a flexible EPDM rubber sleeve that is reinforced with a stainless steel braid for added strength and durability. The connector also features a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
Similar to the CONFLEX-300, the CONFLEX-200 is also designed to prevent the backflow of condensate into the boiler. The connector features a built-in air break that ensures that any condensate that flows back into the connector is discharged safely and efficiently.
Compared to the CONFLEX-300, the CONFLEX-200 is slightly shorter and has a smaller diameter, making it a better option for boilers with tighter spaces or smaller pipes. However, it may not be as suitable for larger boilers or pipes as the CONFLEX-300.
Overall, the McAlpine CONFLEX-200 is a reliable and versatile connector that is ideal for connecting condensing boilers to condensate discharge pipes, especially in cases where space is limited or smaller pipes are involved.
・ Available in 200mm and 300mm lengths
・ Universal connections suitable for 19/23mm rigid pipe and 25mm flexible pipe
・ Easy connection to boiler condensate discharge pipe
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2009 and Building Regulations Approved Document H
The McAlpine Connector 1.1/2 X Female T29" is a plumbing fitting used to connect a 1.1/2 inch male pipe thread to a female fitting. The "T29" in the description refers to the specific model of the connector, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The connector has a male pipe thread on one end and a female fitting on the other end, making it easy to connect to other plumbing components. The female fitting is designed to accept a pipe or another fitting that has a 1.1/2 inch outer diameter.
Overall, this type of connector is commonly used in plumbing applications where a secure, leak-free connection is required. The McAlpine Connector 1.1/2 X Female T29" is made from high-quality materials and is designed to provide reliable performance over an extended period of time.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The Faithfull Essentials Dutch Hoe has a head manufactured from heat-treated (hardened) carbon steel to provide both strength and durability. The polypropylene and powder-coated finish provide improved resistance to rust, scratches, humidity and alkalis in the soil. The handle is manufactured from tubular steel with a hard-wearing polypropylene coating, making it comfortable to use. Best used for clearing surfaces where there is only light growth and is designed to be pushed or pulled through the soil, cutting the roots off weeds just under the surface. Dutch hoe blades will cut in either a forward or backward movement and will glide through the soil with ease. A small head makes it very easy to negotiate carefully around tender new shoots. Overall Length: 1420mmBlade Width: 120mm
The McAlpine ST90CPB-S-HP is a high-performance shower trap designed to efficiently remove waste water from a shower tray. It has a water seal of 90mm x 50mm and a 2" universal outlet, which can accommodate various plumbing configurations.
The high-flow design of the trap allows for quick and efficient drainage, ensuring that water does not accumulate in the shower tray. The trap also features a removable 110mm flange, which makes it easy to clean and maintain.
Overall, the McAlpine ST90CPB-S-HP is a reliable and effective option for any shower installation, providing both performance and convenience.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 90mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 135° Bend - BSP coupling nut x 2" Universal
The McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow bend is made from high-quality materials, ensuring durability and longevity. It features a 90° knuckle bend design, which provides a smooth and efficient flow of excess water in overflow systems. The pushfit mechanism makes it easy to install and requires no special tools or equipment.
The BSP coupling nut allows for easy and secure connection to the overflow pipe. It features a standard BSP thread, which is compatible with a wide range of plumbing systems.
The McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, and other plumbing fixtures.
The pushfit mechanism of the overflow bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90° knuckle bend design provides a smooth flow of excess water, preventing any potential damage to plumbing fixtures and ensuring optimal performance of the overflow system.
Overall, the McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a reliable and effective plumbing component that provides a secure and efficient solution for managing excess water in overflow systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
Monument Clean & Polish Pads are suitable for cleaning, polishing, rust removal, scrubbing and blending. They are rust proof, washable and will not break up during use. Size: 50 x 250 mm pads, medium grit.
