Main Product Description:
FloPlast 90 Degree Elbow 20mm MDPE is a high impact resistant fitting designed for use with MDPE pipes. It has a co-polymer polypropylene body, nut, and guide ring, along with an acetal grab ring and nitrile seal for durability and reliability.
Features:
- High impact resistance
- Co-polymer polypropylene body, nut, and guide ring
- Acetal grab ring
- Nitrile seal
Benefits:
- Enhanced durability and strength
- Improved resistance to thermal and mechanical stress
- Secure connection and sealing capabilities
Main Product Description:
Introducing the Floplast ABS Solvent Weld 92.5 Degree Bend, a versatile addition to your plumbing project. Crafted from robust ABS material, this grey waste bend offers a 92.5-degree swept angle for seamless integration into your waste pipe system. With a long-radius design, it provides a smoother transition compared to traditional knuckle bends while promoting self-cleaning flows. Suitable for use with solvent weld joints, this fitting is available in 32mm and can be installed with 36mm pipes or fittings.
Features:
- Lightweight yet strong ABS construction
- 92.5-degree swept angle for smooth transitions
- Long-radius design for a smoother flow
- Suitable for solvent weld joints
- Available in 32mm size
Benefits:
- Enhances the performance of your waste pipe system
- Promotes self-cleaning flows for improved hygiene
- Easy to install with solvent weld joints
- Durable and resistant to wear and tear
- Compatible with a wide range of pipe sizes and fittings
Main Product Description:
The FloPlast 110mm Soil Weather Collar Black is a robust and cost-effective solution designed to provide additional weather protection for soil pipes. It can be installed just above the rubber seal on flexible tiles for enhanced durability and resistance against environmental conditions. Made from high-quality materials, it offers reliable performance and suits various applications where weatherproofing of soil pipe penetrations is necessary.
Features:
- Robust design for long-lasting use
- Designed specifically for weather protection of soil pipes
- Compatible with flexible tiles
- Easy installation process
- Available in black color
Benefits:
- Enhances the lifespan of soil pipes by providing an extra layer of protection
- Improves overall watertightness and prevents leaks
- Offers a sleek appearance with its black finish
- Cost-effective compared to other similar products
- Suitable for both new installations and repairs
The Floplast F-P ABS Solvent 90° Knuckle is designed for efficient drainage solutions. Made from high-quality ABS material, this 40mm knuckle fitting is perfect for various plumbing applications.
Durable ABS Material: Ensures long-lasting performance and resistance to corrosion.
90° Angle Design: Ideal for changing direction in drainage systems.
Easy Installation: Designed for solvent welding, making it simple to fit.
Versatile Use: Suitable for both residential and commercial plumbing projects.
Anthracite Finish: Provides a modern look that blends well with existing systems.
The F-P ABS Solvent Pipeclip is designed for reliable pipe support in various applications. With a 40mm diameter and a sleek anthracite finish, it ensures both functionality and aesthetics in your plumbing projects.
Durable ABS Material: Built to withstand various environmental conditions.
Easy Installation: Designed for quick and hassle-free setup.
Secure Fit: Holds pipes firmly in place to prevent movement.
Stylish Design: Anthracite finish complements modern plumbing aesthetics.
Versatile Use: Suitable for both DIY and professional plumbing applications.
The Floplast F-P 110mm Soil Short Boss Pipe in Anthracite is designed for efficient soil drainage systems. This durable pipe is perfect for connecting various drainage components.
High-Quality Material: Made from robust anthracite material for long-lasting performance.
Easy Installation: Designed for straightforward connection to existing drainage systems.
Versatile Use: Ideal for both residential and commercial drainage applications.
Compact Design: Short boss pipe allows for flexible installation in tight spaces.
Reliable Performance: Ensures effective drainage and prevents blockages.
The Knipex 82 01 TwinGrip Front and Side Gripping Pliers are ideal for gripping, tightening and loosening screws with worn heads and threads. The three-way adjustable slip joint with push button adjustment allows for precise alteration of gripping capacity.The jaw features a high-grip front with robust teeth and high gear ratio at the tip of the mouth. The side jaw design also features optimised geometry with locking effect for maximum grip when loosening and tightening.Fitted with plastic coated handles for added comfort. They have a very slim design and will work in confined spaces thanks to the slim turning zone for fast screwing. A pinch stop reduces the risk of crushed fingers.
These Knipex 82 01 250 TwinGrip Front and Side Gripping Pliers have the following specifications:Length: 250mm.For Diameters and Width Across Flats: 5-27mm.Max. Frontal Gripping: 10mm.
Pack of 3 Knipex 86 09 180 V01 Protective Jaws. Suitable for all 86 XX 180 models (models from 2019). The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 180mm
The Knipex 95 32 320 Cable Cutters have multi-component, soft grip handles that are lightweight and compact. Ideal for cutting up to 60mm diameter copper and aluminium cables, and for multiple stranded cable. Not suitable for steel wire or wire ropes. The innovative three-stage ratchet-drive ensures high leverage for easy cutting in one-handed and two-handed operation. The steel cutting edges are hardened and precisely ground, ensuring a smooth, neat cut without crushing. They have a fixed handle with a support area and they are ideal for use in confined areas. Specification Length: 320mm.Cutting Capacity: 60mm.
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 180mmBore size 19-60mm
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX001957 tool roll is equipped with 4 common circlip pliers for internal and external circlips suitable for the highest requirements in all trade and DIY applications. The set contains: 1 x 48 11 J1 Internal: Bore: 12-25mm, Length: 140mm. 1 x 48 11 J2 Internal: Bore: 19-60mm, Length: 180mm. 1 x 49 11 A1 External: Bore: 10-25mm, Length: 140mm. 1 x 49 11 A2 External: Bore: 19-60mm, Length: 180mm.
The Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contains: 1 x 87 01 150 KNIPEX Cobra High-Tech Water Pump Pliers. With push button for adjustment on the workpiece. It offers fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Its box-joint design allows for high stability due to double guide. With reliable catching of the hinge bolt: no unintentional shifting. A pinch guard prevents operators' fingers being pinched. Length: 150mm. Capacity: Pipe 36mm Ø, Nuts 32mm. 1 x 74 01 160 KNIPEX High Leverage Diagonal Cutters for very tough, continuous use. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio.Its precision cutting edges are additionally induction-hardened (cutting edge hardness approx. 64 HRC), making them suitable for all sorts of wire including piano wire. Length: 160mm. Cutting Capacity: Hard Wire 3.4mm, Piano Wire: 2.0mm.
The Knipex 02 01 range of combination pliers have high leverage with the added eccentric joint for powerful gripping and seizing. With 50% easier cutting ability on all work applications, the 02 01 come in 180 and 200mm versions with soft cusion grip handles for added comfort and a better grip. The 02 01 series are ideal for soft, hard and even piano wire cutting. The strong durable edges will make an easy and clean cut, with long lasting results even under the toughest conditions. Like most the Knipex range of nippers and cutters the 02 01 range are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc. Cutting Capacity: 02 01 180: Piano: 2.0mm, Hard: 2.5mm.02 01 200: Piano: 2.2mm, Hard: 2.8mm.These Knipex ;High Leverage Combination Pliers ;have the following specification: Length: 200mm (8in).Cutting ;Capacity: Piano: 2.0mm, Hard: 2.5mm.
The Knipex 86 03 Series Pliers Wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power. 86 03 125: 11 Adjustments, Capacity: 23mm.86 03 150: 14 Adjustments, Capacity: 27mm. 86 03 180: 13 Adjustments, Capacity: 35mm.86 03 250: 17 Adjustments, Capacity: 46mm.86 03 300: 22 Adjustments, Capacity: 60mm.The Knipex 86 03 125 Mini Plier Wrench is ideal for precision mechanics, particularly suitable for working on small bolted connections. Thier mini size makes them very good in very confined areas. They are made from Chrome vanadium, forged, oil-hardened electric steel. Lever transmission is greater than 10 : 1 for strong gripping power. Combines pliers and a wrench in a single tool and replaces the need for sets of metric and imperial spanners. Fitted with smooth jaws for damage free installation of plated fittings, allowing you to work directly on chrome. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. It is an adjustable tightening tool that is also excellent for gripping, holding, pressing and bending workpieces. The zero backlash jaw pressure prevents damage to edges of sensitive components. It has parallel jaws that give a more solid grip. Its design allows flexible adjustment of all widths up to the specified maximum size. Length: 125mm.Capacity: 23mm (7/8in).
This Knipex 95 31 Series cable shears with 2 component, soft-grip handles. Perfect for copper and aluminium cables, single and multiple wires. Cuts smoothly and cleanly without crushing. Sharp hardened precision knives. Short design with safety guard. Not suitable for wire cables or steel wire. One hand operation using ratchet principle, means little power is required due to optimum transmission ratio. Two stage ratchet drive for easy cutting. Special grade tool steel. Fixed handle with support area for putting down the plier when cutting.1 x Cable Shears Ratchet Action Multi Component Grip 280mm (11in)
The Knipex Concrete Mesh Cutters have blades made from chrome vanadium, forged, oil-hardened, heavy-duty steel and have robust cutting edges that are additionally induction hardened to approx. 62 HRC. The handles are constructed from powder-coated steel tube and fitted with sturdy non-slip two-colour dual component handle sleeves. The ergonomically angled handles minimise user effort and there is a forged-in stopper with comfortable shock-absorber for increased user comfort. The cutters offer a high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Flat construction in the head and joint area provides increased access even in tight paces. An eccentric bolt provides precise adjustment of the cutter with 12 positions. A special, forged tool steel is used in the joints of the cutters and the bolted cutter head is replaceable. Specification Cutting Capacity: HRC 19: 11mm, HRC 40: 9mm and HRC 48: 6mm. Length: 950mm.Weight: 4.06kg.
The Knipex 74 02 range of diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 21% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 02 series comes in 160, 180, 200 and 250mm versions with Comfort grip handles for added comfort and a better grip. The 74 02 series pliers are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most of the Knipex range of nippers and cutters the 74 02 range of diagonal pliers are oil hardened and tempered for longer life with cutting edges separately induction-hardened to approx. 64hrc.Length: 200mm (8 in).Cutting Capacity: Med/hard wire: 4.2 mm.Hard wire: 3.0 mm.Piano wire: 2.5 mm.Length: 200 mm.
The Knipex 74 02 range of diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 21% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 02 series comes in 160, 180, 200 and 250mm versions with Comfort grip handles for added comfort and a better grip. The 74 02 series pliers are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most of the Knipex range of nippers and cutters the 74 02 range of diagonal pliers are oil hardened and tempered for longer life with cutting edges separately induction-hardened to approx. 64hrc.Length 250mm (10 in) Capacity:Medium Hard Wire: 4.60 mm.Hard Wire: 3.5 mm.Piano Wire: 3.0 mm.
The RAPK2000 Rotabroach™ Raptor Cutter kit contains: 5 x Rotabroach™ Cutters: 14, 16, 18, 20 and 22mm.2 x Pins. The Rotabroach™ Raptor Cutters have a unique and exclusive geometry. They are designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter. The cutters are manufactured from high-speed steel (HSS) with the addition of aluminium (M2AL) and heat-treated to a high temperature to ensure excellent hardness.
The Energizer MAX alkaline battery is all about long-lasting power. Keep everyday work site devices going in the field, the office, the classroom, and anywhere else you need dependable alkaline battery power with MAX. These batteries are built to protect your everyday professional devices from leakage, giving you confidence that you have long-lasting power and protection you’d expect from Energizer.
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials.Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MMIt is compatible with pneumatics applications with a maximum pressure 10 bar @ 20'C. At elevated temperatures (50'C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified Pack of 5m Red and 5m Blue pipe
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 5Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 15Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified.
Length - 5m
Pack of 1
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 20Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 50Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 2Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 3Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certifiedAdd the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 25Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
Main Product Description:
FloPlast 65mm Square 92.5 Degree Offset Bend Brown
Features:
- High gloss finish with blemish-free surface for excellent weathering and colorfastness.
- Cost-effective and long-lasting design.
- Fitter-friendly for easy installation.
- Available in various profile designs and colors, including black, white, and brown.
- Complies with BS EN 12200 1 accreditation standards.
Benefits:
- Enhances the overall appearance of the building due to its high gloss finish.
- Saves money over time due to its durability.
- Simplifies installation process for plumbers and fitters.
- Provides a wide choice of profile designs and colors to match other FloPlast systems.
Main Product Description:
The FloPlast 110mm Soil Boss Pipe Spigot Grey is a high-quality, durable component designed for wastewater drainage and foul discharge applications. Made from PVC-U material, it provides strength and efficiency while ensuring an effective sealing system with its ring seal design.
Features:
- Efficient waste water drainage and foul discharge from appliances.
- Provides rodding access to drains for cleaning and maintenance.
- Lightweight and easy to install.
- Recommended at the base of soil systems.
Benefits:
- Strong and durable construction made from PVC-U material.
- Ensures efficient sealing through ring seal design.
- Allows for easy cleaning and maintenance due to rodding access.
- Can be installed quickly and easily.
The McAlpine STW3-M is a 19mm water seal shower trap designed for use in low-level shower trays. This compact and efficient shower trap features a universal outlet, which allows it to be used with a wide range of different waste pipes and fittings.
One of the key features of the McAlpine STW3-M shower trap is its 19mm water seal, which helps to prevent foul odours from escaping from the shower drain and entering the bathroom. This ensures that the bathroom remains fresh and hygienic, making the shower trap ideal for use in domestic and commercial settings.
The McAlpine STW3-M shower trap is designed to be easy to install and maintain. Its compact design makes it ideal for use in low-level shower trays, and its universal outlet allows it to be used with a wide range of different waste pipes and fittings. The trap is also easy to clean and maintain, with a removable filter that can be easily cleaned and replaced to prevent blockages and ensure reliable performance.
Overall, the McAlpine STW3-M 19mm Water Seal Shower Trap with Universal Outlet is a reliable and efficient shower trap that is well-suited to low-level shower installations. Its compact design, universal outlet, and easy-to-clean filter make it easy to install and maintain, while its robust construction ensures that it will provide long-lasting performance and reliability.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 19mm Water Seal
・ 1½" BSP Thread
・ 1½" Universal Outlet
The Insect-O-Cutor PlusZap features staggered lamps to create efficient UV light output whilst the killing grid offers an effective catch area with easy servicing making it ideal for commercial environments.This third generation PlusZap model offers up to 35% reduction in energy consumption cost and is 20mm slimmer in design saving on space when installed. In addition, the power cable is now hardwired, improving usability.Supplied with: 2 x Screws, Wall Plugs and Suspension Keyrings and 1 x Suspension Chain.
1 x Insect-O-Cutor PlusZap UV Electric Fly Killer 30W
The Hep20 KL Obtuse 135 Degree Spigot Bend is designed for efficient plumbing solutions. This high-quality bend allows for smooth transitions in pipework, ensuring optimal flow and minimal resistance.
High-Quality Construction: Made from durable materials for long-lasting performance.
Efficient Design: 135-degree angle allows for smooth transitions in plumbing systems.
Easy Installation: Designed for quick and straightforward fitting.
Versatile Use: Ideal for various plumbing applications.
Reliable Performance: Ensures optimal flow and minimal resistance in pipework.
