Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 2.Weight 1260g (3lb).Diameter 38mm (1 1/2 in).
Hardened steel chains with diameters ranging from 8mm to 10mm. The range covers applications that require a low, medium or high security chain. Larger diameter chains use an extended end link that allows the small end link to pass through allowing a higher security closed shackle padlock to be used.Square section.Size 900 x 10mm
The Roughneck Slater's Bench is made from high-carbon steel with a powder-coated finish. It features 2 sharp spikes for driving into wooden beams, making it an ideal support for slate tiles whilst trimming or punching holes.
Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal. Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. These blades have the following specification:Blade Type: Metal Cutting, 818R, 200mm x 18tpi. The Irwin IRW10504156 Sabre saw 818R metal cutting blades (200mm) comes in a pack of 5 with 18TPI.
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 30mmLength: 78mm
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 3.Weight 1940g (4 1/2lb).Diameter 44mm (1 3/4 in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: A.Weight 355g (14oz).Diameter 25mm (1 in).
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/30 Brass Padlock is supplied as a carded twinpack and has the following specification: ABUS Security Level: 4. Shackle Width: 15mm.Shackle Height: 17mm.Shackle Diameter: 5mm. Overall Width: 30mm.Overall Height: 50mm.Overall Depth: 14mm.
This Stanley 16 Piece FatMax® Multi-Tool is easy open and allows easy tool acess. It has a soft grip for optimum comfort and a durable tough body which withstands extreme use.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
The Roughneck Triple Connection Tool Lanyard allows tools to be pre-loaded onto the 3 interchangeable loop ends. Tools are securely fastened with a dual-channel barrel lock. The lanyard has a strong, one-piece, internal shock cord with tight weave nylon webbing to prevent over-extension and snagging. Fitted with a stainless steel locking carabiner for durability and to prevent accidental disengagement. Multiple connection methods, including belt loop and carabiner, allow the flexibility to find the most suitable anchor point. Designed to prevent accidents due to falling tools from height, tool lanyards also safeguard against the loss of equipment. Supplied with 3 x Loop Ends with Dual-Channel Barrel Locks. Specification: Length: 1000-1420mm (40-56in)Max. Tool Weight: 3kg (6.6 lb) per end
The Unifix Form A Washers DIN 125A HV140 Bright Zinc Plated - M6 (6.4) are designed to provide a secure and stable fastening solution. Ideal for various applications, these washers ensure optimal load distribution and prevent damage to surfaces.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Standard DIN 125A Design for Versatile Use
Perfect for M6 Fasteners, Ensuring a Secure Fit
Ideal for Both DIY and Professional Applications
Easy to Install, Enhancing Efficiency in Projects
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 38mm (1 1/2 in).Weight 650g (1 1/2lb).
The Roughneck Automotive Bar Set contains one rolling head with a round shank and one aligning bar with a hexagonal shank. Both bars are made from one piece of heat-treated steel. They have a black finish with polished double ends. Bevelled edge for easy use. Applications include: automotive, construction, prying, lifting and aligning.
The Squire CombiBolt 5 Re-Codable Locking Bolt is a unique, patented combination 5-wheel locking bolt, that provides great security for vehicles, sheds, doors and gates. It has a durable die-cast zinc body and wheels that are highly anti-corrosive. Offers over 100,000 combinations. Simple to install and use, one-handed operation. No keys to lose. Supplied with clutch head security screws. Specification: Overall Length: 150mm.Overall Width: 60mm.Bolt Diameter: 10mm.
A tough steel construction with concealed hinge pins and concealed screw heads. Coach bolts supplied with carded versions only. Hardened steel staple. Where to use it: Joint hasps for corner solutions, e.g. chests, cupboards Suitable for doors not closing flush, i.e. door leaf and door frame are not level.Hasp length: 155mmHasp width: 45mmStaple bore dia: 12.5mm
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 525g (1lb 3oz)Diameter 64mm (2 1/2 in). White Head
The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
Pack of 9
The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
Pack of 6
The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
Pack of 10
The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
Pack of 8
The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
Pack of 7
The Roughneck Parallel Screwdrivers have blades made from S2 steel, which has been hardened and tempered. They have magnetic tips and triple injected soft-grip handles. For easy identification, the screwdrivers handles have the size and type clearly written on the handle, with a larger graphic at the end of the handle.Specifications: Tip type: Parallel.Size: 6.0mm x 150mm
The Stanley Tools Super Wonder Bar® Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar. Useful for almost any prying, nail pulling, wood splitting or levering job you are likely to encounter.
The Faithfull Tyre Pressure Dial Gauge is an easy to use, manual tyre pressure gauge for use with Schrader valves as fitted to all automotive tyres, it provides an instant reading of tyre pressure up to a maximum of 60PSI. The gauge features a 45° angled chuck for easy connection to the tyre and will retain the current reading when removed from the valve. The gauge has a quick release button to zero the gauge after use and to allow over inflated tyres to be deflated to the correct pressure. The gauge has a high contrast, easy to read dial with a rubberised coating to help protect the face glass from scratching. Keeping your tyres at the correct pressure helps prevent premature wear, improves you MPG and helps provide maximum braking performance. Use in conjunction with the FAIAUTGAUGE manual tread depth gauge to help ensure your tyres are in top condition.
The Black and Decker BESTA530 Corded Grass Strimmer features the unique Trim and Edge facility, flip the head for easy neat borders and edging every time. With a large cutting swath for fast, efficient cutting. Fitted with a telescopic handle/pole enabling comfortable working, whatever your height. The innovative AFS Automatic Line Feed System saves time and effort when changing the spool. Specification: Input Power: 550W Line Cutting Speed: 7,500/min. Cutting Width: 30cm Line Diameter: 1.6mm Line Supplied: 10m Line Feed System: AFS (Automatic) Replacement Spool: A6481 Weight: 2.4kg
The Roughneck High Velocity Turbo Hammer has a one-piece forged handle construction offering maximum strength and safety. The hammer's special head design and triple injected air cushion grip reduce shock and the transmission of vibrations to the hand and provide a comfortable grip. The magnetic nail holder makes starting easy, especially in hard to reach places. The narrow long shank allows users to strike more accurately at an increased speed. This increased velocity results in higher striking forces at the point of impact and in turn, greater overall tool effectiveness.
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 32mm (1 1/4 in).Weight 445g (1lb).
Loctite Glass Bond has been specifically developed with cyanoacrylate to bond glass to glass, glass to metal, stained glass, crystal and tinted glass. Bonds fast without clamping. The solvent-free formula is transparent once dried, for invisible repairs. Formulated with an anti-clog cap, this instant adhesive is designed for long-term reusability. This glue is waterproof, enabling it to stand up to everyday use and promising long-lasting results even on items going into the dishwasher.
The MEXCO Dust Extraction Swivel Unit enables faster drilling with less dust and gives increased cooling of the diamond segments thus increasing lifetime of the core drill. Suitable for 1/2in BSP Female to 1/2in BSP Male fitment. NOTE: must be used with a suitable dust extraction device and a solid barrel core drill.
These Scan Twin Half Mask P3R Particle Filter Cartridges are designed for use with the Scan SCAPPERESPMO 1/2 mask respirator and SCAPPERESPFF full face respirator. They provide exceptional protection against particles such as dust, smoke, and aerosols, filtering out up to 99.95% of contaminants. Made from high-quality glass fibre and polypropylene, these reusable filters ensure long-lasting performance. Supplied as a pack of 2, they conform to EN 143:2021 standards.
High Efficiency: Filters out up to 99.95% of particles.
Reusable Design: Made from durable glass fibre and polypropylene.
Compatibility: Suitable for Scan SCAPPERESPMO and SCAPPERESPFF respirators.
Pack of 2: Conveniently supplied for extended use.
Meets Standards: Conforms to EN 143:2021 for safety.
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 525g (1 lb 3oz).Diameter 64mm (2 1/2 in). Black Head
The ABUS 26 Series Diskus® Padlocks has a body made from heavy-duty stainless steel. Fitted with a precision pin tumbler cylinder with anti-pick mushroom pins, a solid lock body which resists drill, pull and manipulation attacks, and a through hardened steel alloy shackle to resist saw attacks. Diskus® 'Deep Weld Technology' offers maximum case strength. Key operated, lock retains key until locked. Key operated, lock retains key until locked. Ideal for securing valuables/goods of great value or at a very high risk of theft, warehouses, factory gates, containers and lorries. Made in Germany.This ABUS 26/70 Diskus® Padlock is supplied carded with 2 keys. Specification ABUS Security Level: 8. Shackle Width: 19.5mm.Shackle Height: 17mm.Shackle Diameter: 10mm. Overall Width: 71mm.Overall Height: 71mm.Overall Depth: 30mm.
This Energizer® LED Opal GLS Non-Dimmable Bulb has the following specification: Fitting: ES (E27)Input Wattage: 5.6W (40W equivalent)Lumens of Light: 470 lmSwitching Cycles: 40,000Average Rated Life: 15,000 hoursColour Temperature: 2,700K (Warm White)Lamp Dimensions: 60 x 110mmDimmable: NoRated: A+
