Rustins quick dry primer and undercoat can be used as a primer on new and bare wood, MDF, plaster, brickwork and cement. Used as an undercoat on primed or painted surfaces and may be overcoated with water or solvent based finishing paints. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry Primer & Undercoat Grey.Size: 500 ml.
Bosch Metal HSS Twist Drill Bits are made from high-speed steel for strength and resistance to heat and wear. The drill bits from 4mm in diameter feature a split-point PointTeQ tip which centres it, helping you drill accurately.
1 x Bosch Metal HSS Twist Drill Bit 5 x 52 x 86mm
The Fiskars Xact Small Weeding Knife is ideal for removing weeds and moss between paving stones and narrow areas. Its dual side stainless steel blades provides ultimate performance and efficacy. The comfortable handle design with SoftGrip allows multiple handle positions during use, and the longer handle brings perfect balance and extra leverage power when needed.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus Extreme 2 Drill Bit has the following dimensions: Diameter: 20mmWorking Length: 150mmOverall Length: 200mmPack Quantity: 1
Facom 40B Series Slim Metric Combination Spanners feature a 12-point OGV profile provides more effective contact between the ring and the nut, better torque transmission, reduced risk of slipping, and longer service life. The ring end is offset by 15° for finger protection and safer, more comfortable work on flat surfaces.Its 15° offset flat handle reduces the angle required to reposition the wrench when working in confined spaces. The slim design provides excellent access to hard-to-reach areas. A matt chrome finish ensures high corrosion resistance.
1 x Facom 40B.11 Slim Metric Combination Spanner 11mm
These Facom R.RC extensions have a 1/4 inch drive to fit 1/4 inch sockets or ratchets. Their extra length means that hard-to-reach bolts and other fasteners are more easily accessed for loosening or tightening. The extensions are finished in polished chrome. Performance: conform to ISO 3316, DIN 3123 and NF ISO 3316.The FCMR217 extension has the following specifications:Length: 250mm.Weight: 105g.
Blackfriar Wood Dye penetrates deep into wood to enrich the colour of bare timber. It can be used on new interior and exterior timber, plywood and chipboard. Plus you can also mix the dye colours to create your own individual shades. Available in 9 attractive shades. Application Method; Brush or Cloth. Coverage: 30m²/L/Coat.Touch Dry: 1-3 hours.Recoatable: 24 hours.The Blackfriar BKFWDT250 Wood Dye comes in the following:Size: 250ml.Colour: Teak.
The Expert Metric Short Arm Hexagon Keys are manufactured from chrome vanadium steel for increased torque strength that exceeds current standards. They have a black zinc plated finish. Micro chamfered angles on the end faces provide increased grip in the screw head. Confrom to ISO 2936 - DIN 911.This Expert Metric Short Arm Hexagon Key has the following dimensions: Size: 14mmArm Length: 154mmL Length: 70mmWeight: 264g
IRWIN Vise-Grip adjustable wrenches have scales in both a metric and imperial on their jaws. The parallel jaws have a smooth surface to provide a secure grip and to help prevent scratches. The quick adjusting jaw opening mechanism allows easy, one-handed, fine adjustment. This durable wrench is made from chrome vanadium steel for a durable wrench.10508159: Length: 250mm, Capacity 31mm.
These Forgefix Clout Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or similar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Galvanised 65mm Bag Weight 2.5kg
DEWALT Hardened core for extra strength and durability. - Flexible Torsion Zone absorbs torque peaks and reduces breakage (Torsion bits only). - Extra Grip ribs grip the screw and reduce slipping (specific bits only). - Tough quality, professional screwdriver bits including Torsion and Torsion with Extra Grip ribs. Size: 60 mm - Magnetic
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.1 X Marples M444 Series Blue Chip Bevel Edge Chisel 10mm (3/8in).
The Wiha LiftUp electric Screwdriver with Bit Magazine is the ideal companion for every electrician out on a job. The bit holder is hidden within the handle, provides space for 6 standard slimBits. It extends out of the magazine at the press of a button making it easy to take out the bits. The twistable cap ensures convenient handling.The time-tested ClicFix holder grips all bits securely and reliably locks them into place. This technology transforms the bit magazine into an all-purpose screwdriver. Slender, 75mm slimBits ensure perfect access to low-lying screws or spring clips thanks to protective insulation fully integrated into bits in the front section.The 6mm slimBits can only to be used with the slimVario bit holder and slimTorque VDE bit holder (VDE torque system). NOT for use with bit styles C 6.3 and E 6.3. Certified to the international IEC 60900 standard. Supplied with the following: 3 x 75mm electric slimBit Slotted Bits: 2.5, 3.5 & 5.5mm. 2 x 75mm electric slimBit Phillips Bits: PZ1 & PZ2. 1 x 75mm electric slimBit PlusMinus/Pozidriv Bit SL/PZ2.
Bostik Super Glu is effective on a large range of materials and surfaces, including china, metals, rubber, hard plastic, laminate and much more. It bonds in seconds without the need for heat or hardener and provides very strong bonds of high tensile strength. Super Glu Liquid is supplied in a 3g tube.
The ITL Insulated Combination Pliers with side cutter and injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Combination Pliers. Size: 150mm (6in).
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. They can be used for fast cutting in wood, wood with nails and tough plastics. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2350QZ reciprocating blade is ideal to be used for fast cuts in wood with nails and tough plastics. The blade has a new Plunge point tip for accurate plunge cutting.
Box of 50 MasonMate Spring Toggles and Screws M6 x 75mm. The MasonMate Spring Toggles Screws are light-duty fixings for ceiling installations. The wings take high loads due to their wide coverage. Zinc plated for increased durability. M6 x 75mm (50)
Irwin Bolt Grip Fastener Remover 5 Piece Base Set ideal for removing rounded, rusty or painted bolts. Unique reverse spiral flute design securely grips and removes stubborn nuts and bolts. Can be used with a hand ratchet 3/8 in square drive and has hexagon flats for use with a spanner or adjustable wrench. Sizes: 9 (3/8in), 11 (7/16in), 13 (1/2in), 14 (9/16in), and 15mm (5/8in). Supplied in a carrying case.
METALMATE® Type P Nylon Insert Nuts are zinc plated for a longer-lasting finish. The nylon insert wraps around the thread and locks the nut in place, preventing the nut from loosening under vibration. These quality-assured threaded fasteners are suitable for use in engineering, production, construction, repair and maintenance. Standard: DIN 982. Quality assurance is extremely important to the METALMATE® brand. The entire purchasing and logistics process complies with international standards. All METALMATE® products are sourced from accredited manufacturers to ensure that only the highest quality threaded fasteners are supplied. Our supply chain partners are subject to regular audits to ensure compliance, overall service quality and timely order fulfilment. We also insist on routine assessments so the ownership of the factory does not threaten the integrity of METALMATE®. These strict quality procedures help us to be more efficient, improve product standards and deliver excellent customer service.
These METALMATE® Type P Nylon Insert Nuts have the following specification:Size: M10Finish: Zinc PlatedClass: 8 SteelBox Quantity: 50
The DEWALT Self-Feed Drill Bits are ideal for drilling of clean holes in wood, MDF, hardboard and chipboard. They have two sharp cutting edges and an aggressive 'self feed' spur for rapid penetration into material. They are fitted with a non-slip shank for better in chuck bit retention. For use with corded and cordless drills.These DEWALT Self-Feed Drill Bits have the following specification: Diameter: 51mm.
The Faithfull FAIPITCHMW Screw pitch gauge with a combination of 52 Whitworth standard 55 degree and Metric standard 60 degree leaves per gauge (0.25 to 6.0mm). The leaves are clearly etched with the size and are used to determine the pitch of various Metric and Whitworth threads. Manufactured from high-quality polished tool steel and featuring a locking device at both ends to securely lock the leaves
The Black & Decker A7200 Mixed Drilling and Screwdriving Set is perfect for getting you started, drilling and screwdriving into materials such as masonry, brick walls, metal, wood and plastic. This set enables you to complete basic DIY tasks around the home efficiently. It is supplied in an easy to use storage case with convenient bit access, enabling you to keep all your accessories safe and secure. Contains: 13 x Bradpoint Drill Bits: 3(x2), 3.5, 4, 4.5, 5(x2), 5.5, 6, 6.5, 7, 7.5, 8mm.12 x HSS-TiN Drill Bits: 1.5, 2(x2), 2.5 ,3(x2), 3.5, 4, 4.5, 5, 5.5, 6mm.5 x Masonry Drill Bits: 3, 5, 6, 8, 10mm.10 x Nut Drivers: 5(x2), 6, 7, 8, 9, 10, 11, 12, 13mm.13 x 25mm Phillips Bits: PH0(x3), PH1(x3), PH2(x3), PH3(x4).15 x 25mm Pozi Bits: PZ0(x4), PZ1(x3), PH2(x4), PH3(x4).9 x 25mm Slotted Bits: SL4(x2), SL5(x3), SL6(x2),SL7.2(x2).10 x 25mm Star Bits: 10, 15, 20(x2), 25(x2), 27(x2), 30(x2).3 x 25mm Square Bits: 1, 2, 3.7 x 25mm Hex Bits: 4(x2), 5(x2), 6(x3).4 x 50mm Phillips Bits: PH1, PH2(x2), PH3.3 x 50mm Pozi Bits: PZ1, PZ2, PZ3.3 x 50mm Star Bits: 10, 15, 20.1 x Countersink.1 x Magnetic Bit Holder.
This Arctic Hayes Gas Leak Detector is a brush on, non-flammable, non-corrosive gas leak fluid for detection of leaks in joints, connections etc. Safe for use on oxygen pipes. Complies with requirements of BS EN 14291:2004.
The Faithfull Shallow Pot Magnets are designed for clamping directly onto a steel surface. The large, powerful ceramic magnet is encased within a protective steel shell. Magnetic on one face only, creating a solid clamping force for holding and lifting metal parts. The shallow depth allows use in confined spaces. They can be secured with bolts through their centre holes and their heavy lifting capacities make them a great choice for use in industrial settings.Diameter: 35.0mmHeight: 8.0mmPull Power: 5.5kg
This Hultafors PR8ME Short Steel Tape has both metric and imperial graduations. Specifications: Blade Length: 8m/26ft.Blade Width: 25mm.Accuracy: EC Class I.
Pest-Stop Super Rat & Mouse Killer Pasta Bait is ready-to-use, no need to open or touch bait. Pre-measured portions with a peanut scent that is highly attractive to rodents. To be used in tamper-resistant bait stations for the control of rats and mice in and around buildings. Legally compliant. Contains the powerful active ingredient difenacoum. Packed into plastic tubs for freshness and security. Each tub contains 15 x 10g sachets.
Command™ Clear Mini Hooks provide an innovative solution for hanging decorations, calendars and other lightweight objects. 3M stretch-release technology provides a strong hold and removes cleanly. They’re easy to apply and remove - leaving no holes, marks or sticky residue. Clear hooks and strips blend in, making them suitable for any room in the house or office. Rehanging them is as easy as applying a Command™ Clear Refill Strip, so you can take down, move and reuse them again and again. Suitable for a wide variety of surfaces; solid, hollow and painted walls, as well as other materials including wood, tiles and metal. Contains: 6 x Clear Mini Hooks (hold up to 225g per hook)8 x Clear Adhesive Strips
The Fiskars Solid™ Trimming Hedge Shears are ideal for trimming and sculpting bushes and hedges. Fitted with non-slip handles to provide added comfort and control. Specification: Length: 550mmWeight: 0.85kg
These Forgefix Panel Pins are ideal for lightweight and decorative tasks. The shape of the pin helps to prevent splitting of hard or brittle timber.The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications such as fixing decorative timber mouldings.Panel Pin Bright 20mm Bag Weight 500g
The HiKOKI 711099 Keyless Chuck and Adaptor allows you to convert your SDS Plus Chuck into a 13mm Keyless Chuck. For use with SDS Plus Drill to allow you to use conventional drill bits.
Briwax Wax Polish is blend of Beeswax and Carnauba waxes, suitable for applying to bare wood or over Sanding Sealer. It is a natural wax woodfinishing treatment for all types of wood, in the home and in the workshop for all craftsmen. Briwax gives an instant natural, long lasting sheen. Ideal for wood carvings and turned wood, for floors and skirtings, this wax polish cleans and protects wood, tiles, metalwork, marble and melamine etc. The wax is easy to apply and buff and dries quickly. Application: Apply with 0000 steel wool, Briwax brushes or cloth. Can be applied directly to timber or onto Briwax Shellac Sanding Sealer. Available in clear, which maintains the natural colour of the wood, and 13 wood shades to stain and wax in one operation.BRWWPMB400 Wax Polish has the following specifications:Colour: medium brown.Size: 400g.
The DEWALT DWST83392 TOUGHSYSTEM™ 2.0 Half-Width Organiser has 6 deep, removable cups that can be taken away from the organiser individually for ultimate flexibility. The virtually indestructible, polycarbonate lid, provides visibility of the contents without it having to be opened. It also incorporates an IP65 seal that provides protection from water and dust. Fitted with an ergonomic flip-up carry handle for comfortable transportation. Auto Stacking Latches are intuitive and easy to use, allowing TOUGHSYSTEM™ modules to be connected together. These newer style latches are compatible with older TOUGHSYSTEM™ modules. Easy close, metal wire, front latches provide added security but are easy to open, they can even be opened with one hand. Specification: Max. Load: 10kgDimensions (WxLxH): 370 x 260 x 130mm
The Vitrex Premium Power Tool & MDF Respirator protects the lungs against fine toxic particles. Fitted with a breathe-easy valve for extra comfort. Suitable for use with most power tools: drills, saws, grinders, sanders, routers etc. Ergonomically designed mask for an airtight seal whilst providing a secure and comfortable fit. With a colour-coded nose clip for simple identification. Ideal for working with MDF, softwood, hardwood, metal and concrete. Conforms to EN 149:2001 & A1:2009 FFP2 NR.
