PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
The Bahco Hydraulic Bottle Jack with a welded structure, ensures better performance and prevents oil leakages. The steel forged base provides great wear and impact resistance. An extension screw allows precise height adjustment whilst the serrated saddle provides a secure lifting grip. A safety valve prevents the ram from being overextended, which would cause damage to the piston.Suitable for working in a vertical position. CE certified by Official Independent Technical Inspection Association.
The Bahco BH4G6 Hydraulic Bottle Jack has the following specifications:Maximum Load: 6 Ton (6,000kg).Height Range: 210-416mm.Operating Conditions: -20°C to 50°C.Weight: 3.9kg.
Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home. It dries quickly, so you can apply a second coat after just 4 hours, enabling you to finish the whole job in one day. It is suitable for bare woodwork, hardboard, masonry, dry plaster and cement. Application method: Brush or spray. Coverage: 14m²/L/CoatTouch Dry: 1-2 hoursHard Dry: 3 daysRecoatable: 4 hoursBlackfriar Quick Drying Acrylic Primer Undercoat Colour: White.Size: 1 Litre.
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
Bahco Taper Saw File has a triangular shape, with edges tapering towards the point. The surfaces and edges are single cut. For sharpening saws with cross toothing at a 60° angle. It is also tanged. Available only in second cut. Size 150mm (6in).Side: 15/32in.
The JRP Riveting Products 4.8 x 16mm A2 Stainless Steel Countersunk Head Rivets are designed for reliable fastening in various applications. Made from high-quality A2 stainless steel, these rivets offer excellent corrosion resistance and durability.
High-Quality A2 Stainless Steel for Durability
Countersunk Head Design for Flush Finish
Ideal for Various Applications Including Metal and Wood
Easy to Install with Standard Tools
Perfect for DIY and Professional Use
The Primaflow Earth Sleeving is designed for effective electrical insulation and protection. Measuring 3mm in diameter and 100m in length, this sleeving is perfect for various electrical applications.
High-Quality PVC Material for Durability
3mm Diameter for Versatile Use
100m Length for Extended Applications
Ideal for Electrical Insulation and Protection
Easy to Install and Cut to Size
The DEWALT TOUGHSYSTEM 2.0 Compact Tool Bag has over 25 pockets, and a front bungee cord allowing vertical storage of power tools, hand tools, and other items. Comfortable and easy to carry thanks to its padded, adjustable shoulder strap. Constructed from durable 1680D fabric which is dirt-repellent. The bag is fitted with a waterproof base, making it ideal for any work environment, and can be stacked with any other TOUGHSYSTEM 2.0 product. Specifications: Max Load: 18kg.Dimensions (L x H): 30 x 38cm.
The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specification: Bit Holder: 1/2in Detent PinNo Load Speed: 2,500/min.Impact Rate: 3,600/bpmMax. Fastening Torque: 406NmNut Busting Torque: 610NmWeight: 1.1kg (without battery)The DEWALT DCF922P2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x TSTAK Kitbox
730 Arbor is suitable for 14-30mm holesaws, for use with hand held machines. All arbors are hardened for maximum strength. The 3834 Series Arbors are available in a range of sizes suitable for different chuck capacities. Shank size: 6.4mm Triangular shank.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX19Z 18G Galvanised Staples 19mm
Bahco ERGO™ VDE Insulated Screwdrivers for pozi head screws. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The black oxide finish tip provides higher accuracy.Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage.Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V.Conforms to: ISO 2380/DIN 5264.
1 x Bahco ERGO™ VDE Insulated Pozi Screwdriver PZ1 x 80mm
Rustins Knotting is used for sealing knots in wood and on resinous and creosoted timber to prevent bleeding through paint film. It is fast drying and prevents discolouration of paints. Suitable for interior and exterior use. APPLICATION:Prepare the surface by first sanding it smooth before applying liberally over knots and surrounding area.Do not sandpaper knotting once applied.Resinous and creosoted timber should be sealed completely with 2 coats. Knotting should not be used under polyurethane clear varnishes, water based varnishes or water based paints.Rustins Knotting. Size: 125 ml.
These IRWIN Snap-Off Blades are made from carbon steel. Available sizes: 9mm, 18mm and 25mm. Pack quantities of either 5 or 10 strips.Pack of 10 IRWIN Snap-Off Blades 9mm
The Bosch GSR 12V-35 HX Professional Screwdriver offers the perfect balance between compactness, productivity and performance. Its compact design easily reaches into tight and narrow spaces. With a rotation speed of 1,750 rpm, it is the fastest 2-gear 12V tool of its kind, enabling smooth and efficient working with fast results. Exchanging bits is easy thanks to the convenient lockable 1/4in bit interface. Suitable for screwdriving into a wide range of materials. Compatible with all Bosch Professional 12V and 10.8V batteries and chargers. Specifications: Bit Holder: 1/4in with internal hexagon shank.No Load Speed: 0-460/0-1,750/min.Max. Torque (Soft/Hard): 20/35Nm.Torque Settings: 201.Max. Screw Diameter: 8mm.Max. Drilling Diameter: Wood 32mm, Steel 10mm.Length: 126mm.Height: 162mm.Weight: 0.57kg excl. battery.This Bosch GSR 12V-35 HX Professional Screwdriver comes as a Bare Unit, NO battery or charger in a cardboard box.
The Irwin Cordless Multi-Purpose Drill Bits have been designed for cordless, low speed multi-purpose drilling. They offer around 10% extra battery life per charge. They have a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork: the Cordless Drillbit is excellent for such drilling jobs - where you drill through wood into brickwork. Only one drillbit is needed to do the job and will drill a wide selection of different materials like:BrickworkCeramic TilesBreeze BlockWoodDry WallGypsum BoardLimestoneSlateMarbleEternitePlastics/Reinforced plastics.Length: 160mm Diameter: 12mm Flute Length: 99mm
Bahco File Set 5 Piece, Engineer's 10in file set, all are fitted with ERGO™ handles for comfort. Comes with:1 x 1-210-10-1-2 half-round bastard file.1 x 1-230-10-1-2 round bastard file.1 x 1-100-10-1-2 hand bastard file.1 x 1-100-10-2-2 hand second cut file. 1 x 1-160-10-1-2 square bastard file. Supplied in a plastic roll wrap.
7 Piece DEWALT McLaren 1/2in Drive Deep Impact Socket Set. Manufactured to the highest standards to ensure application durability, with a black oxide finish, and laser marking. Supplied in a locking stackable case with a removable inner tray.Contains the following sizes: 17, 18, 19, 20, 21, 22, 24mm.
Box of 50 MasonMate Galvanised Through Bolts M10 x 105mm. The MasonMate Galvanised Through Bolts built for use in non-cracked concrete or solid stone. Easy to install. It has a strike cap to prevent thread damage. Comes with an A2 stainless steel clip. Anchor body grade 5.8, hex nut grade 8. M10 x 105mm (50)
Box of 25 MasonMate Galvanised Through Bolts M12 x 100mm. The MasonMate Galvanised Through Bolts built for use in non-cracked concrete or solid stone. Easy to install. It has a strike cap to prevent thread damage. Comes with an A2 stainless steel clip. Anchor body grade 5.8, hex nut grade 8. M12 x 100mm (25)
Box of 15 MasonMate Galvanised Through Bolts M16 x 150mm. The MasonMate Galvanised Through Bolts built for use in non-cracked concrete or solid stone. Easy to install. It has a strike cap to prevent thread damage. Comes with an A2 stainless steel clip. Anchor body grade 5.8, hex nut grade 8. M16 x 150mm (15)
The Primaflow Warix Flange is designed for reliable plumbing connections. This 22mm x 3/4" male flange is perfect for various plumbing applications, ensuring a secure fit and durability.
High-Quality Construction: Made from durable materials for long-lasting use.
Easy Installation: Designed for straightforward fitting in plumbing systems.
Versatile Use: Suitable for a range of plumbing applications.
Secure Connection: Provides a reliable and leak-free connection.
Compact Size: Ideal for tight spaces and efficient plumbing setups.
The Primaflow Rad Tail Extension Piece is designed for easy installation and adjustment in radiator connections. With a size of 1/2" and adjustable length from 50mm to 70mm, it ensures a perfect fit for your plumbing needs.
Adjustable Length: Easily modify from 50mm to 70mm for a perfect fit.
Durable Material: Made from high-quality CP for long-lasting performance.
Easy Installation: Designed for straightforward connection to radiators.
Versatile Use: Ideal for various radiator setups in residential and commercial applications.
Reliable Brand: Trust in Primaflow for quality plumbing solutions.
Bahco 80 Series Chrome Plated Finish Adjustable Wrenches with tapered jaws with a measurement scale on the fixed jaw. They have a 16º head angle with no protruding shank when fully open and a strong I section handle with a spring loaded square section, and a knurled adjusting nut.Overall length: 100mm (4 in).Jaw Capacity: 13mmWeight: 60g.Spare Adjustable Jaw BAH8069C-2 - Available to orderSpare Knurl Set: BAH8069C-95 - Available to order
Abus Door Closers ensure that doors will close safely and quietly. This is especially important with fire doors that must be self-closing to comply with legislation. This top-fitting door closer is easy to install and suitable for almost any door size and design. The AC7303 door closer has a sliding arm and silver finish. It features adjustable closing speed and force with back check.
Evo-Stik Flashband & Primer is a self-adhesive flashing strip giving an instant watertight seal. Excellent adhesion to a wide range of building materials. Quick and easy-to-use, ideal for emergencies. Includes primer for ease of application.Width: 300mmLength: 3.75m
