The McAlpine STW70SSM is a mushroom flange designed to be used with McAlpine STW 1½" shower traps. It is designed to fit over the waste pipe and provide a decorative finish to the installation.
The mushroom flange is made from high-quality stainless steel and is designed to be durable and long-lasting. It is easy to install and is suitable for use with a variety of plumbing systems.
The STW70SSM is designed to ensure that the shower trap installation looks neat and tidy, with a decorative finish that complements the bathroom decor. It also helps to prevent any potential for leaks around the waste pipe by providing a secure seal.
Overall, the McAlpine STW70SSM Mushroom Flange for STW 1½" Shower Traps is a great addition to any bathroom using a McAlpine STW 1½" shower trap, providing a decorative finish while also ensuring that the installation is secure and free from any leaks.
・ Available in White Plastic or Chrome Plated Stainless Steel
・ Available in 70 or 85mm sizes
PlastiKote metallic spray paint is ideal for small decorative and craft projects and is perfect for adding a special touch around the festive season. The paint creates a deep, rich metallic finish and is suitable for indoor and outdoor use. Suitable for: papier mache, stone, terracotta, wicker and wood. Drying time: Touch dry in 5-10 minutes, thoroughly dry in 25-35 minutes. Coverage: approximately 2.23m² per 400ml.This PlastiKote Metallic Spray Paint has the following specifications: Colour: Gold.Pack Size: 400ml.
The Thomas Dudley Cistern LL 6/4L DF HP/LP Side Connections is designed for both high and low pressure systems, ensuring reliable performance in various applications. Made from durable plastic, this cistern is ideal for modern bathroom installations.
Durable Plastic Construction for Longevity
Compatible with High and Low Pressure Systems
Side Connections for Easy Installation
Efficient Water Management for Optimal Performance
Stylish White Finish to Match Any Bathroom Decor
The JCP Fixings Ankerbolts Hexagon Flange Head Bright Zinc Plated - 6/8 x 50mm is designed for reliable fastening in various applications. Made from high-quality materials, these ankerbolts ensure durability and strength.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Hexagon Flange Head Design for Enhanced Grip
Ideal for Heavy-Duty Applications
Easy to Install with Standard Tools
Perfect for Use in Construction and DIY Projects
The JCP Fixings Ankerbolts Hexagon Head Bright Zinc Plated - 8/10 x 100mm is designed for robust fastening in various construction applications. Made from high-quality materials, these ankerbolts ensure durability and reliability.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Hexagon Head Design for Easy Installation
Suitable for Heavy-Duty Applications
Dimensions: 8/10 x 100mm for Versatile Use
Ideal for Use in Concrete and Masonry
The JCP Fixings A4-316 Stainless Steel Internal Threaded Sockets are designed for durability and reliability in various applications. With a size of M10 x 90, these sockets are perfect for secure connections in both DIY and professional settings.
High-Quality A4-316 Stainless Steel for Corrosion Resistance
Internal Threaded Design for Easy Installation
Ideal for Use in Marine and Outdoor Environments
Compatible with Standard M10 Bolts and Screws
Perfect for Structural and Mechanical Applications
14mm replacement appliance connector for use with McAlpine appliance traps WM14,WM11,WM12, WM15, V33WM, SSK1, SSK2, SSK3, SK1, SK1A, SK2, SK2A & SK3 for connecting appliances like Fridges, Tumble Dryers, Air-conditioning, water softeners etc.
The McAlpine FLEX-JKS is a flexible fitting designed for use in plumbing systems. It is manufactured by McAlpine, a UK-based company that specializes in plumbing products.
The FLEX-JKS features a BSP (British Standard Pipe) coupling nut on one end and a BSP male thread on the other end. This design allows the fitting to be easily installed in a variety of plumbing applications, including those that require a flexible connection between two pipes.
The flexible design of the fitting allows for some movement between the pipes, which can help to reduce stress on the plumbing system and prevent leaks or damage. The FLEX-JKS is made from high-quality materials and is designed to be durable and long-lasting, providing reliable performance over time.
Overall, the McAlpine FLEX-JKS is a versatile and reliable component of a plumbing system, particularly in situations where a flexible connection is required. Its BSP coupling nut and BSP male thread make it easy to install and compatible with a wide range of plumbing systems.
・ Available in 1¼", 1½", and 2" sizes
・ Offers complete flexibility for any required angle or offset
・ Universal Outlet Connection and PVC Plain Spigot to BS EN 1329-1:2000
・ Approximate adjustable lengths below
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
The McAlpine 1 1/2" Multifit Loose Nut T8M is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The loose nut is made from high-quality materials, ensuring durability and longevity. It features a Multifit design, which is compatible with a wide range of plumbing systems. The nut is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine 1 1/2" Multifit Loose Nut T8M is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The loose nut is designed for easy installation and can be tightened by hand or with a wrench. It provides a secure and watertight seal, ensuring that waste water is properly managed and discharged. The nut is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine 1 1/2" Multifit Loose Nut T8M is a reliable and effective plumbing component that provides a secure and efficient solution for connecting waste pipes to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
Consort 2kW Plinth Heater PHSL2BL
_Fan only setting for air circulation in warm weather
_Compatible with advanced single zone controllers and run-back time controllers
_LED indicator light with automatic safety cut-out and fitted 2.2m of supply cable
_Minimum kick space height of only 100mm
_With a 1 year guarantee
The McAlpine WP2H is a white plastic plug with a rubber seal and handle designed for use in plumbing systems. Like the WP2 plug, it is designed to fit into the end of a waste pipe or other plumbing fixture to prevent the flow of water or other fluids.
The WP2H plug is made from high-quality plastic material that is resistant to corrosion and damage from chemicals. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture. The handle on the plug allows for easier installation and removal of the plug, making it a convenient solution for plumbing maintenance and repairs.
The WP2H plug has a larger diameter than the WP1 plug, making it suitable for use in larger pipes or fixtures. It also has a more secure fit than the WP1 plug, making it ideal for use in applications where there is a risk of high pressure or force on the plug.
The WP2H plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is easy to install and remove with the handle, making it a convenient solution for plumbing maintenance and repairs.
Overall, the McAlpine WP2H plug with rubber seal and handle is a reliable and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable plastic construction, watertight rubber seal, and convenient handle make it a dependable option for preventing leaks and odours in plumbing systems.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in white polypropylene
The McAlpine STW70CPB is a standard waste fitting designed to be used with McAlpine STW 1½" shower traps. It is designed to be installed between the shower tray or bathtub and the waste pipe and connects to the trap using a compression fitting.
The waste fitting is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and comes with a removable grid for easy access and cleaning.
The STW70CPB is designed to ensure that water flows away from the shower or bathtub quickly and efficiently, preventing any potential for standing water or blockages in the drain. It is also designed to be compatible with a variety of plumbing systems, making it a versatile solution for most bathrooms.
Overall, the McAlpine STW70CPB Standard Waste for STW 1½" Shower Traps is a reliable and efficient solution for ensuring that your shower or bathtub remains free from standing water and blockages. It is a great addition to any bathroom using a McAlpine STW 1½" shower trap.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
The Black & Decker 10-in-1 Steam-Mop is ready to use in 30 seconds. For use on all hard floors and kills 99.9% of germs and bacteria. It has an easy-fill water tank, just fill with tap water, no chemicals are required. The swivel steering has a 180 degree pivoting mop head that can manoeuvre around furniture and in tight spaces. Supplied with: 1 x Nozzle, 1 x Large Squeegee with Foam, Plus Cover; 1 x Small Brush with Copper Bristles, 1 x Large Brush, 1 x Grout Brush, 2 x Small Brushes, 1 x Carpet Glider and 1 x Microfibre Pad. Specification: Input Power: 1,300WPre-Heating Time: 30 secondsSteam Temperature: 120 degreeCCable Length: 4m
The McAlpine STWGR-GP 1½" Shower Grid is a plumbing accessory that is designed to fit over the waste outlet of a shower tray to prevent debris from entering the waste pipe and causing blockages. The grid features a 1½" diameter and is designed to fit a range of shower waste traps, including those made by McAlpine.
The shower grid is made from high-quality, durable materials that are resistant to corrosion and damage from water and chemicals commonly found in bathrooms. The grid is easy to install and can be easily removed for cleaning and maintenance.
The STWGR-GP shower grid features a stylish, modern design that complements most bathroom décor. It is also available in a range of finishes, including chrome and gold, to match other fixtures and fittings in the bathroom.
In addition to preventing blockages, the shower grid also helps to improve hygiene by preventing debris and bacteria from accumulating in the waste pipe. This can help to prevent unpleasant odours and reduce the risk of bacterial growth.
Overall, the McAlpine STWGR-GP 1½" Shower Grid is a high-quality and practical plumbing accessory that can help to improve the performance and hygiene of shower waste systems. It is an ideal choice for use in both residential and commercial bathroom installations.
・ Available in White, Chrome Plated or Gold Plated Plastic
Redring RPS8 Pure 8.5kW Instantaneous Electric Shower - White
_Available in kW rating options: - 7.5kW- 8.5kW- 9.5kW- 10.5kW
_Finish: White
_3 power settings
_Max. Noise Level (dB(A)): 15
_Energy rating: A
John Guest stem elbow push-fit fitting connects two John Guest push-fit fittings to create a 90° swivel type connection. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 2
The McAlpine WC-CON8F-S-BTW is a flexible WC connector designed for use with back to wall toilet pans. It features a 97-107mm inlet and a 90° bend for easy installation in a horizontal position. The connector is made from high-quality, durable materials to ensure a long-lasting, reliable connection. The flexibility of the connector allows for easy adjustment and maneuverability during installation, making it ideal for use in tight spaces or where access is limited. This product is designed to provide a secure and leak-free connection between the toilet pan and the waste pipe.
・ Available for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Soft synthetic rubber inlet connection
・ Worm drive hose clip provides a secure and reliable connection to the WC pan spigot prior to the final placement against the wall of furniture
McAlpine ST90CPTOP+TUBE is a chrome-plated plastic flange and dip tube designed for use with 90mm shower traps. The dip tube is designed to fit inside the shower trap and prevent debris from entering the drainage system. The flange is designed to fit over the top of the shower tray or bath, providing a neat and tidy finish.
The McAlpine ST90CPTOP+TUBE has a diameter of 113mm and is made from high-quality materials, ensuring durability and longevity. The chrome-plated finish provides an attractive and easy-to-clean surface, making it ideal for use in bathrooms and wet rooms.
Overall, the McAlpine ST90CPTOP+TUBE is a reliable and effective solution for preventing blockages and maintaining good hygiene in your shower or bath drainage system.
・ Suits ST90 Trap
・ Includes Dip Tube
・ Full range of spare parts and accessories are available on The Plumbers Mate
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 2
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK. Colour coded for easy identification of service type For use with Speedfit fittings Suitable for hot and cold water and central heating systems
John Guest straight connector push-fit fitting connects two equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 3
The McAlpine 1 1/2" x 1 1/4" Trap Inlet Reducer is a durable plumbing accessory designed to reduce the size of a 1 1/2" trap inlet to a 1 1/4" inlet. This high-quality reducer is made from sturdy materials to ensure long-lasting performance and can be used with a variety of plumbing fixtures such as sinks and basins.
The reducer is easy to install and can be used for both commercial and residential applications. It helps to ensure that water flows smoothly through the plumbing system and prevents any blockages that could cause damage or inconvenience.
With its compact size and versatile design, the McAlpine 1 1/2" x 1 1/4" Trap Inlet Reducer is a must-have for any plumber or DIY enthusiast looking to upgrade their plumbing system.
・ Mounted on Card with Hanging Slot
・ 1½" x 1¼" Trap Inlet Reducer
・ Available in 2 sizes
・ Manufactured in White Polypropylene
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate ¼ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit service valve with integrated isolation handle
Red and blue indices for easy identification of water supply
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
Listing is for one Valve but this comes with a red and blue insert to go in the handle of the valve.
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
The McAlpine Multifit Straight Connector 1.1/2" T28M-BL is a plumbing fitting used to connect two pipes with a diameter of 1.1/2 inches. It is designed for use with solvent weld waste pipes and is commonly used in domestic and commercial plumbing systems.
The "Multifit" part of the name stands for "Multi Fit," which is a type of fitting made by McAlpine, a UK-based plumbing company. The "Straight Connector" refers to the straight connection between the two pipes, rather than a 90-degree angle or other configuration.
The "T28M" part of the name is a reference to the specific model number of the fitting. It is important to ensure that the fitting is compatible with the pipes you are working with and that it is installed correctly to avoid leaks or other plumbing issues. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is a plumbing fitting designed to connect a 1.1/4 inch solvent weld pipe to a push fit pipe. The "S18-Abs" in the description refers to the specific model of the adaptor, which is manufactured by McAlpine, a UK-based company that specializes in plumbing and drainage products.
The adaptor is designed with a straight configuration, meaning that it forms a straight connection between the two pipes. The solvent weld end of the adaptor is designed to fit inside a 1.1/4 inch solvent weld pipe, while the push fit end of the adaptor is designed to fit onto a push fit pipe.
The push fit end of the adaptor is made with ABS, which is a type of plastic commonly used in plumbing applications due to its durability and resistance to chemical corrosion. The McAlpine 1.1/4 Solvent X Push Fit Adaptor Straight S18-Abs" is designed to provide a secure, leak-free connection between solvent weld and push fit pipes, making it a useful fitting for a variety of plumbing applications.
・ Available in 1¼" and 1½" sizes
The McAlpine FSW2PC Sink Combined Waste and Overflow is a plumbing fitting designed for use with sinks. It combines both the waste and overflow functions into a single unit, providing a simple and efficient solution for draining water from the sink.
The unit features a stainless steel flange with a center pin design, which helps to ensure a secure and stable fit on the sink. It also has a chrome-plated overflow grid and a black PVC plug with a chrome-plated chain, adding a touch of style and functionality to the sink.
The McAlpine FSW2PC Sink Combined Waste and Overflow is made from high-quality materials, ensuring its durability and resistance to wear and tear. It is a reliable and efficient solution for draining water from the sink, and its compact size and simple design make it a popular choice for both residential and commercial applications.
Overall, the McAlpine FSW2PC Sink Combined Waste and Overflow is a practical and stylish plumbing fitting that provides a simple and efficient solution for draining water from a sink. Its high-quality materials, center pin design, and elegant features ensure long-lasting performance and reliable functionality in a wide range of plumbing applications.
・ Available in 1¼" and 1½" sizes
・ Available with 70mm or 85mm flange
・ Chrome Plated Plastic overflow grid
・ Black PVC plug and CP chain
・ Flexible overflow tube has OD of 25mm
The McAlpine FPKIT-3 WC Frame Connector Kit is a set of components designed to connect a toilet bowl (WC) to a drainage system. The kit includes the following parts:
WC Connector with 90mm plain end: This is a plastic pipe that connects to the bottom of the toilet bowl and allows waste to pass through to the drainage system.
110mm outlet seal: This is a rubber gasket that fits onto the end of the WC Connector and provides a tight seal to prevent leaks.
Flush pipe with finned seal connector: This is a plastic pipe that connects the WC Connector to the drainage system. It has a finned seal connector that fits tightly into the drainage pipe.
Fixing bolts and caps: These are the screws and caps that are used to attach the WC Connector and flush pipe to the toilet bowl and the drainage system.
Overall, the McAlpine FPKIT-3 WC Frame Connector Kit provides all the necessary components for a secure and leak-free connection between a toilet bowl and a drainage system.
・ Suitable for in-wall WC frames
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
The McAlpine X10 75mm Water Seal Straight Through Trap with 1¼" Multifit Outlet and Cleaning Eye is a plumbing fitting that is designed to provide a water seal between a waste pipe and a variety of different appliances, such as sinks, baths, and showers.
The trap features a 75mm water seal, which prevents foul smells and gases from escaping into the room, and a 1¼" multifit outlet, which allows for easy installation with a range of different waste pipe materials.
In addition, the trap also includes a cleaning eye, which allows for easy access and cleaning of the trap, helping to maintain the performance and reliability of the plumbing system.
To install the McAlpine X10 75mm Water Seal Straight Through Trap, simply attach the trap to the waste outlet of the appliance using the 1¼" multifit outlet. The trap should then be connected to the waste pipe using the appropriate fittings, ensuring that the cleaning eye is easily accessible for future maintenance and cleaning.
It's important to ensure that the McAlpine X10 75mm Water Seal Straight Through Trap is installed correctly to prevent any leaks or other plumbing issues. If you're unsure about how to install the trap, it's recommended that you consult with a professional plumber for assistance.
・ 1¼" Inlet and Outlet
・ 75mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Includes Cleaning Eye
・ Inlet and outlet connections are directly in-line allowing for neat plumbing behind basin pedestals
The McAlpine WC-CON5 is a type of rigid WC connector that is designed to connect a toilet pan to a soil pipe with a 97-107mm inlet and a 20mm offset. The connector is adjustable in length to accommodate different installation requirements.
Here are some additional details about the McAlpine WC-CON5:
It is made from high-quality materials that are durable and resistant to corrosion and other forms of damage.
The connector has a unique shape that allows it to fit securely and snugly between the toilet pan and soil pipe, ensuring that there are no leaks or other issues.
The adjustable length feature allows for flexibility in installation, which can be particularly useful in situations where the soil pipe is not in the ideal location.
The 20mm offset is designed to provide extra space between the toilet pan and the soil pipe, which can be useful in situations where there are space constraints or where the soil pipe is not located directly behind the toilet pan.
The McAlpine WC-CON5 is compatible with most standard toilet pans and soil pipes, making it a versatile and reliable choice for a wide range of installation scenarios.
Overall, the McAlpine WC-CON5 is a high-quality, reliable WC connector that is designed to provide a secure, leak-free connection between a toilet pan and a soil pipe. Its adjustable length
・ Available with finned outlet for 4"/110mm PVC-U and cast iron soil pipe diameters (internal), and with plain end outlet to fit 110mm soil or underground pipe fittings
・ 97-107mm Inlet suits all pan spigots
・ Adjustable Length
・ Complies with BS 5627:1984 and DIN 1389-2
・ Manufactured in Polypropylene
