The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44013 Combination Spanner has the following specifications:Head size: 13mm.Length: 170mm.
The IRWIN Marples M444 Series Blue Chip Bevel Edge chisels have high impact round blue plastic handles, contoured for maximum control, radiused for a comfortable grip and have been designed for use with a mallet and will absorb the occasional hammer blow. The solid one-piece forged bolster fitted bevel edged blades are manufactured from the best in category carbon steel, tempered along the full length of the blade and hardened up to the last 25mm for a longer working life and annealed for an edge that is slow to blunt yet easy to sharpen.Siz1 X Marples M444 Series Blue Chip Bevel Edge Chisel 38mm (1 1/2in).
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44010 Combination Spanner has the following specifications:Head size: 10mm.Length: 145mm.
This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4006 Adjustable Wrench has the following specifications: Length: 380mm (15 inch). Capacity: 50mm. Capacity AF: 1.15/16 inch.
The McAlpine TSG50WH 50mm Water Seal Trapped Gully is a plumbing component that is used to collect wastewater from various sources and channel it into the drainage system. It is suitable for use in both commercial and residential plumbing installations.
The TSG50WH gully features a water seal of 50mm that prevents unpleasant smells and gases from entering the living space. The gully also has a two-piece design consisting of a clamp ring and cover plate that can be easily removed to access the gully for maintenance and cleaning purposes.
The gully is designed with a 2" horizontal outlet and a 2" x 1½" socket reducer that makes it compatible with different types of waste pipe sizes. This versatility makes it easy to install in a range of plumbing installations.
The TSG50WH gully is made from high-quality and durable materials that are resistant to corrosion and damage caused by water and chemicals. The removable trap feature makes it easy to clean and maintain, preventing blockages and maintaining hygiene.
Overall, the McAlpine TSG50WH 50mm Water Seal Trapped Gully is a reliable and effective plumbing component designed for various plumbing installations. Its water seal, two-piece design, and compatibility with different waste pipe sizes make it an ideal choice for use in both commercial and residential plumbing installations.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 5.5mm.Working Length: 57mm. Overall Length: 93mm.Pack Quantity: 1.
Bahco ProfCut replacement blades are available for Bahco Pullsaws. The variations are fine, extra fine or a double sided blade.Blade onlyLength: 300mm (12 in)Teeth 13tpi.
Rustins Quick Dry Radiator Enamel is ideal for touching up white appliances. The enamel is specially designed so that it stays white and does not yellow with age. The enamel is touch dry in 30 minutes, heat-resistant and low odour.Not to be used on oil filled electric radiators. Available in gloss or satin finish.This Rustins Quick Dry Radiator Enamel has the following specifications: Colour: WhiteFinish: SatinSize: 500ml
The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/50 TITALIUM™ Padlock has the following specification: ABUS Security Level: 5. Shackle Width: 28mm.Shackle Height: 29mm.Shackle Diameter: 8mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 17mm.
The Primaflow Brass Slip Air Release Plug is designed for efficient air venting in plumbing systems. This 15mm plug ensures reliable performance and durability, making it an essential component for any installation.
High-Quality Brass Construction for Longevity
15mm Size for Compatibility with Standard Plumbing Systems
Easy Installation with Slip Fit Design
Effective Air Release to Prevent System Blockages
Ideal for Use in Heating and Cooling Applications
The DEWALT DCB132 FlexVolt XR Dual Port Multi-Voltage Charger simultaneously charges 2 XR Li-Ion DEWALT 10.8, 14.4 or 18/54 Volt slide pack batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions.
These Forgefix Screw Cup Sockets made from solid brass finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws. APPLICATIONTo enable flush finish in numerous joinery installations.Can be used with most screw types.Screw Cup Sockets Solid Brass Polished No. 8 Bag 100
Teng Tools Flare Nut Wrenches are ideal for gripping the nuts on the ends of tubes, for example in automotive and plumbing applications. They have a narrow opening, just wide enough to allow the wrench to fit over the tube, and thick jaws to increase the contact area with the nut. This allows for maximum contact on plumbing nuts, which are typically softer metals and therefore more prone to damage from open-ended wrenches. This double flare nut wrench has different sized openings at each end. The heads are angled to allow better access. Made from chrome vanadium steel, it is strong and durable. Manufactured in accordance with DIN 3118 standards Satin finish.The TEN641011 Flare Nut Wrench has the following specifications:Head sizes : 10 and 11mm.Opening sizes: 7.0 and 8.2mm.Length : 152.4mm.
Irwin Phillips insert screwdriver bits engineered for use in hand-driving applications or with power tools, designed for use in insert holder with C-clip for retaining ring notch. Compact and versatile with a 1/4 inch hex body and made from high grade S2 Steel.Pack of 10 Phillips PH2 x 25mm long.
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 6.0 x 50mm.Box quantity: 100.
Rustins Quick Dry Masonry Paint is a high quality, acrylic paint which is suitable for dry exterior masonry surfaces. To apply, use a large brush and apply evenly. The surface area must be clean, dry, free from dust and other contaminants likely to affect adhesion. No primer is required if fresh mortar has been applied to pointing. Do not use on damp surfaces. One coat is usually sufficient. Drying time: approx 30 mins, depending on temperature and humidity.Re-coat: 4 hours.Coverage: 14m² per 1 litre.Colour: Matt Red.Size: 250ml.
RUBI Carbide Scoring Wheel made of high quality tungsten carbide. Patented model with new high technology RUBI alloy; maximum precision and resistant to wear.Compatible with RUBI TS-MAX, TR-MAGNET and SPEED-MAGNET cutters.
RUBI Carbide Scoring Wheel for wall tiles.Specification:Size: 6mm (1/4in).
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 3/8 AFLength 38mm
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 1.5mm.Working Length: 18mm.Overall Length: 40mm.Pack Quantity: 10.
The Irwin Construction Table & Mitre Circular Saw Blade with welded carbide teeth for a stronger tooth bond and longer life. The ultra compact carbide is up to 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents and a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods.The IRWIN Construction Mitre Circular Saw Blade has the following specifications: Blade Diameter: 254mm.Bore: 30mm.Teeth: 48.Kerf Thickness: 2.8mm.Tooth Config: ATB/Neg.Machine: Mitre.
The DeWALT TOUGHSERIES™ Chalk Reel rewinds 6x faster* with a 6:1 planetary gear system and features a durable aluminium case. Create prominent, clear chalk lines for roofing, framing, and general construction using the TOUGHSERIRES™ bold braided 1mm string with line lock feature. Help maximise life by maintaining this reel and making string replacements with the convenient open-access door.Designed for tough conditions on demanding job sites.
The Stanley FatMax® Tamper-proof TORX tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - Tamper-proof TORXTip Size TTX30Blade Length 125mm (5in)
The main reason for blade wear is overheating. When cutting metal and abrasive materials, TrendWax Lubricant will extend sawblade life by keeping the blade cool at the cutting points. Simply use the Trendiwax lubricant stick at regular intervals, applying it directly onto the teeth of the stationary blade. Available in 400g tube.
The Rustins Quick Dry Small Job Paint has been designed specifically for small painting projects. A water-based, hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. Suitable for use on wood and metal. A 250ml tin will cover approximately 3.25m² Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes the paint ideal to use on children's toys and furniture.The Rustins Quick Dry Small Job Paint has the following specification: Finish: Gloss.Colour: White.Size: 250ml.
The DEWALT Tungsten Carbide Tipped (TCT) Hinge Boring Bit for drilling cantilever hinges. TCT cutting edges for fast, clean, precise, countersink hinge drilling. Ideal for man made materials with abrasive resins. Hexagonal shank facilitates a firm chuck grip. Diameter: 35mm.Length: 65mm.
10 x MasonMate ETA Spin In Capsules 10mm. The MasonMate ETA Approved Spin In Type Capsule containing two chemicals which harden when mixed within a hole. 10mm (10)
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/40HB63 Brass Padlock has the following specification: ABUS Security Level: 5.Keyed Alike Key Reference: 406. Shackle Width: 22mm.Shackle Height: 63mm.Shackle Diameter: 6mm. Overall Width: 40mm.Overall Height: 103mm.Overall Depth: 15mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 0 (bastard).Type: hand needle file.
This Teng Tools socket is a professional bi-hexagon 3/4 inch drive socket. The socket is in imperial AF size, and is manufactured from chrome vanadium steel with a satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.The TENM340136 bi-hexagon 3/4 inch drive socket has the following specifications:AF Size: 1.1/8 inch. Length: 51mm.
Blackfriars Polyurethane Varnish transforms interior woodwork and gives a tough and durable finish. It gives wooden surfaces new life and enhances the natural shades of wooden floors and furniture. Resistant to knocks, heat and diluted acids. Application Method: Brush and Roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 3 days.Recoatable: 16 hours.Blackfriar Polyurethane Varnish P45 Medium Oak Gloss 500ml
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 32mm.
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-100-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 100m/330ftBlade Width: 13mmAccuracy: EC Class II
The Makita DUR189Z Brushless LXT Line Trimmer with Automatic Torque Drive Technology: RPM is automatically shifted according to the density of weeds. This allows for better energy saving and lower noise levels. The multi-functional control panel shows 3x RPM levels, plus the status of overload, overheat and over-discharge. Its efficient brushless motor has a soft start feature and constant speed control with a reverse switch for grass clipping removal. For added safety, there is an electric brake. Fitted with a wire guard that reduces the risk of damaging fences, flowers or ornaments. Foldable for added convenience. Supplied with: 1 x Safety Googles, 1 x Single Harness, 1 x Nylon Cutting Head, 1 x Accessory Bag and 1 x Hex Wrench. Supplied as a Bare Unit - No Battery or Charger. Specification: No Load Speed: 4,000/5,000/6,000/min.Cutting Diameter: 30cmSpindle Size: M8 x 1.25 RHWeight: 3.0kg
