The Facom E.506-340S Torque & Angle Adaptor for use in confined spaces to provide torque or angle increments. The electronic display prevents reading errors and tightening is indicated via LEDs and a buzzer. It has 9 torque and/or angle values that can be preset, a 50 result memory, a locking keypad and a magnetised tool (ratchet) fastening. Angle tightening eliminates friction issues related with torque tightening. The movement, and hence faster tension, is defined by the screw pitch and tightening angle. Torque/angle tightening is performed in 2 steps. By pre-torquing to approach the parts and eliminate interface faults. Then tightening at a specific angle. Proper assembly tension prevents the fastener from loosening or breaking. Supplied in a plastic case with a calibration certificate and 2 x AAA-LR03 1.5V Batteries. Specification Torque Accuracy: ± 3°.Angle Accuracy: ± 2°.Capacity: 17-340Nm. Measuring Units: Nm, lbf.ft, lbf.in, kg.cm and deg. Measuring Mode: Peak or Follower.
This Facom 38-piece 1/4 inch drive socket set is compact, portable and versatile - fits in pockets or toolboxes. It is suitable for use in a wide variety of applications and has an excellent selection of screwdriver bits - with pictogrammes for fast identification - and a full range of 1/4in socketry.The twist handle on the rotator ratchet allows the operator to work in the tightest of spaces, only having to move their wrist slightly to rotate the handle and the drive, rather than moving from the elbow, saving time, effort and money. The convenient drive direction switch allows use in both left and right directions and the ratchet secures sockets firmly in place until the quick release button is activated. The palm control system prevents accidental reversal when tightening and loosening fasteners.The set is easy to clean and resistant to workshop solvents. The compact plastic case has a metal hinge and clasp for extra durability. This 38-piece 1/4 inch Drive metric socket set consists of:-10 x 1/4 Hex sockets 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm.1 x 1/4 Spinner handle.1 x 1/4 Rotator ratchet.2 x 1/4 Extension bars 55mm (2 1/8 in) and 100mm (4 in).1 x 1/4 Universal joint.7 x 1/4 Hex Torx bits TX10, TX15, TX20, TX25, TX27, TX30 and TX40.3 x 1/4 Slotted screwdriver bits 4.5, 6.5 and 8mm.5 x 1/4 Hex bits 3, 4, 5, 6 and 7mm. 3 x 1/4 Hex Phillips bits PH1, PH2 and PH3.3 x 1/4 Hex Pozidriv bits PZ1, PZ2 and PZ3.1 x 1/4 Bit holder. 1 x 1/4 Adaptor 1/4 inch.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44036 Combination Spanner has the following specifications:Head size: 36mm.Length: 440mm.
This Norbar Industrial Torque Wrench has the following specification: Drive: 3/4in SquareRange: 200-800Nm (150-600 lbf·ft)Ratchet Type: Push ThroughLength: 1,214mmWeight: 6.65kg
This Norbar Industrial Torque Wrench has the following specification: Drive: 3/4in SquareRange: 700-1500Nm (500-1000 lbf·ft)Ratchet Type: Push ThroughLength: 1475mmWeight: 9.6kg
This Norbar Industrial Torque Wrench has the following specification: Drive: 1in SquareRange: 120-600Nm (100-450 lbf·ft)Ratchet Type: Push ThroughLength: 954mmWeight: 5.95kg
A professional bi-hexagon 1/2in square drive deep socket produced in accordance with ISO 900 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Length: 79mm.Size: 21mm.
This Teng Tools set is an ideal solution for removing broken screws, pipes, bolts and studs. The 11-piece set contains 5 screw extractors, 4 bolt extractors and 2 nut splitters, which are supplied in a handy storage tray. The TTSN11 Stud and Nut Remover Set contains the following: 5 x Screw extractors: 7/64, 9/64, 5/32, 1/4 and 19/64 inch. 4 x Stud 1/2inch drive extractors: 6, 8, 10 and 12mm. 2 x Nut splitters: 5-20mm capacity and 14-27mm capacity.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. These regular 6-point metric impact sockets have a 3/4 in square drive, and have a locking pin and retaining ring facility.The TEN940528 Impact Socket has the following specifications:Size: 28mm. Length: 52mm.
The Bahco S4RM ratcheting spanners are made from top quality forged steel, nickel and chrome plated in a matt finish for a smooth and secure grip. Easy to use, these spanners simply grip the nut or bolt being removed or tightened, the ratcheting spanner heads are sized either side of each spanner for the desired size of nut or bolt, just push the direction lever to remove or tighten the nut or bolt with a ratchet action. They are an ideal option for motor mechanics, as these spanners can be used in awkward places and minimal movement is required to use them.1 x Bahco S4RM Series Reversible Ratchet Spanner 16/17/18/19mm
The Norbar Professional Adjustable Reversible 'Automotive' Torque Wrenches are designed with compact dimensions and a narrow engagement angle resulting from the 72 tooth pattern. The 200Nm version is now fitted with a new, high strength 48 tooth reversible ratchet. This feature makes the wrench ideal for use in the confined spaces of modern motor vehicles and many other applications. They have a new ergonomic handle with a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. There is a secure push/pull locking mechanism is quick and intuitive to use and prevents accidental wrench adjustment. Factory calibrated to ±3% and our new mechanism ensures that the accuracy is retained for longer. They are fitted with a large scale window and long scale length for great visibility and accurate setting. Unique on a torque wrench, the Timestrip® gives a visual indication that the wrench is due for re-calibration. Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017.Norbar Pro 50 Adjustable Reversible 'Automotive' Torque Wrench 1/2in Drive 10-50Nm Part Number: 15013.Accuracy: ±3%Operates Between: 10-50Nm/7.5-37.5lbf ft.Square Size: 1/2in.Ratchet Teeth: 72.Ratchet Diameter: 30mm.Length: 327mm.Weight: 0.69kg.
The Norbar Metric 16mm Spigot Ring End Fittings are designed to suit Norbar 16mm diameter spigot ended torque handles. They are made from forged alloy steel and the ends are easily interchangeable. The torque handle can be calibrated to give correct torque at nut/bolt.Norbar 16mm Spigot Ring End Fitting. Specification Size: 19mm.Operates Between: 0.0-261.0Nm.
The NorTorque® utilises Norbar’s proven mechanism and internal components, and incorporates them into a purposeful and attractive torque wrench that will delight a wide range of users, from professional mechanics to hobby enthusiasts. The wrench offers a comfortable, robust single material handle which also contains an easy to set scale. Fine engineering ensures that the wrench adjustment is both fast and fingertip light meaning that you can do your job more efficiently. The sleek body tube finish was chosen for its robustness and minimal process impact on the environment.This Norbar NorTorque® Adjustable Dual Scale Ratchet Torque Wrench has the following specification: Drive: 1/2inAccuracy: ±3%Range: 60-300Nm (45-220 lb.ft)Ratchet Diameter: 52mmRatchet Teeth: 60Length: 588mmWeight: 1.4kg
Melco Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. The tubular box spanner is manufactured from bright plated steel and is able to accommodate a tommy bar.The Melco TA24 A/F Box Spanner is made with 4mm steel and has a black powder coated finish. With the following specification: Size: 1.5/16 x 1/2in.Length: 190mm (7.1/2in).
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 12 x 13mm Length 100mm (4 in)
A professional, S2, 1/2in drive hexagon bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55mm.Size 10mm
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120530 Bi-Hexagon, 12-point socket has the following specifications:Size: 30mm. Length: 43mm.
The BlueSpot Tools 1/2in & 1/4in Metric Socket Set. Manufactured from chrome vanadium for increased durability. Knurled sockets to provide a secure grip. Supplied in a sturdy plastic case with metal clips for quick and convenient storage. Contains: 18 x 1/2in Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30 and 32mm.4 x 1/2in Deep Wall Sockets: 14, 15, 17 and 19mm.2 x 1/2in Spark Plug Sockets: 16 and 21mm. 1 x 1/2in Quick Release Ratchet Handle.2 x 1/2in Extension Bars: 5in and 10in.1 x 1/2in Three Way Adaptor.1 x 1/2in Universal Joint.1 x Coupler 1/2in x 5/16in (8mm). 13 x 1/4in Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm. 8 x 1/4in Deep Wall Sockets: 6, 7, 8, 9, 10, 11, 12 and 13mm. 1 x 1/4in Quick Release Ratchet Handle.2 x 1/4in Extension Bar: 2in and 4in.1 x 1/4in Sliding T Bar.1 x 1/4in Spinner Handle.1 x 1/4in Universal Joint.1 x 1/4in Flexible Extension Bar 150mm. 2 x 30mm Phillips Bits: PH3 and PH4.2 x 30mm Pozi Bits: PZ3 and PZ4.4 x 30mm TORX Bits: T40, T45, T50 and T55.4 x 30mm Hex Bits: 8, 10, 12 and 14mm.3 x 30mm Slotted Bits: 8, 10 and 12mm. 1 x 30mm Bit Adaptor. 2 x 1/4in Phillips Bit Sockets: PH1 and PH2.2 x 1/4in Pozi Bit Sockets: PZ1 and PZ2.6 x 1/4in TORX Bit Sockets: T8, T10, T15, T20, T25 and T30.4 x 1/4in Hex Bit Sockets: 3, 4, 5 and 6.3 x 1/4in Slotted Bit Sockets: SL4, SL5.5 and SL7. 3 x Hex Key Wrenches: 1.5, 2 and 2.5mm.
The Norbar HandTorque® HT3-1000 has been designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque. The quick change cranked reaction with improved flexibility allows for a reaction in 8 orientations. It has a robust, compact design for minimal maintenance and increased life. Supplied with 2 reaction bar styles for maximum versatility. 5:1 nominal torque multiplication reaction dependant. Ratio with cranked foot is 4.8:1; with straight reaction being 4.9:1 Specification - Accuracy: ±4%Drive: Output: 3/4in Square, Input: 1/2in SquareRange: 100-1,000Nm (74-738 lbf.ft)Weight: 2.7kgReaction Plate Weight: Cranked: 0.5kg, Straight: 0.69kg
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 17 x 19mm Length 125mm (5 in)
This Faithfull Straight Pattern Tyre Lever is manufactured from hardened and tempered carbon steel for strength and reliability, and has a corrosion-resistant chrome plating. With hardened and rounded tapered tips for easy rim entry, it also features both a flat and hook end. Ideal for general automotive and agricultural use. Available in 4 lengths.This Tyre Lever is 16in in length.
The Facom 6-point OGV S.LA sockets have a 1/2 inch drive to fit 1/2 inch ratchets. These sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of metric sizes.Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS13LA Deep Socket has the following specifications:Socket size: 13mm.Length: 77mm.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM4406 Combination Spanner has the following specifications:Head size: 6mm.Length: 115mm.
A 35 piece Socket Set in case with removable hinged, click lock lid for use as an individual set or a part of Teng Tools Tool Storage Systems. Supplied in storage tray. Contents: 11 x 6 Point Regular Sockets: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, & 13mm.6 x 6 Point Deep Sockets: 6, 7, 8, 10, 12 & 13mm. 11 x 1/4in Hex Bits: TPX10, TPX15, TPX20, 5mm Hex, 6mm Hex, PH1, PH2, PZ1, PZ2, Flat: 4mm & 5.5mm. 1 x 1/4in Drive Quick Release, Flip Reverse Ratchet.1 x Universal Joint.2 x Extension Bars: 2 & 4in.1 x 1/4in Drive Coupler Adaptor.1 x 3/8in Female/1/2 in Male T Bar Adaptor1 x 1/4in Drive Spinner Handle Extension with Power Drive 6in. Specification Dimensions: 265 x 142 x 50mm.Weight: 1.0kg.
A professional 1/2in square drive Torx bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55 mm.Size. TPX40
This Teng Tools Speed Brace has a crank-shaped handle that is used to drive sockets. It is ideally used instead of a ratchet in contexts when a lot of turning (i.e a lot of fasteners) is needed, where it can save substantial time. The speed brace requires ample room to swing the handle and ample access to the fastener heads. Used occasionally in automotive repair or job shop work. This Speed Brace has a 3/8 inch square drive. It is manufactured from chrome vanadium steel for stength and durability, and has a satin chrome finish. For comfortable grip, the speed brace has a plastic handle. Length: 380mm (15 inch).
Teng 1/2in drive 12 piece socket set supplied in a plastic container. Clips for additional sockets can be added to the base of the container. The set consists of: 10 x Hex Sockets: 8-24mm.1 x 1/2in Drive Ratchet Handle with 45 Teeth.1 x Extension Bar 125mm.
This Teng Tools Oil Filter Wrench has an all-steel chain for the effective removal of spin-on type oil filters. Supplied with a 1/2inch drive carbon steel adaptor. Capacity: 120mm.
This Teng Tools socket is a professional 3/4 inch drive, metric hexagon socket. The socket is manufactured from chrome vanadium steel for strength and durability and has an attractive satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.Size 50mmLength 72mm
A professional, 3/8in drive, hexagonal, metric deep socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.Size: 12mm.Overall Length. 45.5mm
