Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120524 Bi-Hexagon, 12-point socket has the following specifications:Size: 24mm. Length: 40mm.
Bahco DD/S14 Deep Impact Socket Set of 1/2in deep impact sockets, that have a black finish and are made from high performance alloy steel. To be used with machines, for maximum safety use clamping springs. Conforms to DIN 3121-G 12,5 ISO 1174 standards. Comes supplied in a case with 2-component handles, and a 1 piece removable three section plastic box. Sizes: 10, 11, 12 ,13 ,14, 15, 16, 17, 18, 19, 21, 22, 24, and 27mm.
SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance.The small, flat heads and dynamic drive profile are designed for easy access in confined spaces.Open-end angle 15° , ring end 15° offset,DIN 3113 / ISO 3318 / ISO 7738.Size 13mmLength 160mm.
SBS20 series combination spanners manufactured from high grade chrome-vanadium steel for strength and tolerance.The small, flat heads and dynamic drive profile are designed for easy access in confined spaces.Open-end angle 15° , ring end 15° offset,DIN 3113 / ISO 3318 / ISO 7738.Size 11mm.Length 135mm.
The Norbar Professional Torque Wrench Models 650 – 1500 are highly accurate up to a reading of ±3%. The wrenches are non- length dependent. An extension handle can be used to reduce operator effort (handle supplied as standard with Model 1000 and 1500). The wrenches are easy to use; a positive ‘click’ can be heard, seen and felt, helping to prevent over torqueing. Have a long scale where the length is shown in Nm and lbf.ft. The fine 60 tooth ratchet allows the wrench to be used in confined areas. Supplied with a declaration of conformance to satisfy the requirements of BS6789:2017 and a carry case for storage and protection.Model 650 Torque Wrench Specification Drive: 3/4in Square. Range: 130-650Nm (100-480 lbf.ft).Torque Radius: 744mm.Ratchet Teeth: 60.Ratchet Type: Push-Through.Length: 886mm.Weight: 4.0kg.
The NorTorque® utilises Norbar’s proven mechanism and internal components, and incorporates them into a purposeful and attractive torque wrench that will delight a wide range of users, from professional mechanics to hobby enthusiasts. The wrench offers a comfortable, robust single material handle which also contains an easy to set scale. Fine engineering ensures that the wrench adjustment is both fast and fingertip light meaning that you can do your job more efficiently. The sleek body tube finish was chosen for its robustness and minimal process impact on the environment.This Norbar NorTorque® Adjustable Dual Scale Ratchet Torque Wrench has the following specification: Drive: 1/2inAccuracy: ±3%Range: 20-100Nm (15-75 lb.ft)Ratchet Diameter: 42mmRatchet Teeth: 72Length: 375mmWeight: 0.8kg
The Norbar Professional Adjustable Reversible 'Automotive' Torque Wrenches are designed with compact dimensions and a narrow engagement angle resulting from the 72 tooth pattern. The 200Nm version is now fitted with a new, high strength 48 tooth reversible ratchet. This feature makes the wrench ideal for use in the confined spaces of modern motor vehicles and many other applications. They have a new ergonomic handle with a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. There is a secure push/pull locking mechanism is quick and intuitive to use and prevents accidental wrench adjustment. Factory calibrated to ±3% and our new mechanism ensures that the accuracy is retained for longer. They are fitted with a large scale window and long scale length for great visibility and accurate setting. Unique on a torque wrench, the Timestrip® gives a visual indication that the wrench is due for re-calibration. Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017.Norbar Pro 100 Adjustable Reversible 'Automotive' Torque Wrench 3/8in Drive 20-100Nm Part Number: 15014.Accuracy: ±3%Operates Between: 20-100Nm/15-75lbf ft.Square Size: 3/8in.Ratchet Teeth: 72.Ratchet Diameter: 30mm.Length: 367mm.Weight: 0.76kg.
The Norbar Professional Torque Wrench Models 650 – 1500 are highly accurate up to a reading of ±3%. The wrenches are non- length dependent. An extension handle can be used to reduce operator effort (handle supplied as standard with Model 1000 and 1500). The wrenches are easy to use; a positive ‘click’ can be heard, seen and felt, helping to prevent over torqueing. Have a long scale where the length is shown in Nm and lbf.ft. The fine 60 tooth ratchet allows the wrench to be used in confined areas. Supplied with a declaration of conformance to satisfy the requirements of BS6789:2017 and a carry case for storage and protection.Model 1500 Torque Wrench Specification Drive: 1in Square.Range: 500-1,500Nm (370-1,100 lbf.ft).Torque Radius: 1423mm.Ratchet Teeth: 60.Ratchet Type: Push-Through.Length: 1570mm.Length (inc. Ext. Handle): 2070mm.Weight: 6.7kg.
The Norbar Model 650 Professional Torque Handle with a 22mm spigot is an upgrade to the Model 550 and has the same high quality and accuracy as the model 60 - 330 Professional Wrenches. The Positive 'click' can be heard seen and felt, so you know you have reached the right setting and it has a long scale length in both Nm and lbf·ft, allowing error free setting. The wrench handle is non length dependent. With an accuracy of ±3% of reading. Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017. Specification Accuracy: ±3%.Operates Between: 100.0-480.0 lbf·ft/130.0-650.0Nm.Length: 821mm.Torque Radius: 744mm.Weight: 3.6kg.
The Stanley Tools FatMax Fine Ratchet Handle has 120 teeth and works in 3 degree increments. A quick-release button on the head enables quick socket change. Its ergonomic bi-material handle provides increased comfort and control. The head has a fully polished chrome plated finish for increased durability and rust resistance. A low profile switch lever prevents accidental switching and allows easy one-hand operation.
Required torque loads are set by turning the sleeve until the required setting is opposite the mark. All Britool 3/8 inch square torque wrenches indicate with touch, sound and sight when the required torque is reached. This Britool torque wrench range are distinguishable by a length independent mechanism, push through reversible mechanism and have a retractable adjustment mechanism which avoids accidental adjustment. The torque wrench complies with ISO 6789 and is supplied in sturdy plastic storage case.The Britool BRIAVT100A Torque Wrench 3/8in Drive has the following specifications:2.5 to 11 Nm.2- 8 ft.lb3/8 inch Square Drive.Length: 12 1/2 inch.
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600514R Ratchet Combination Spanner has the following specifications:Size: 14mm. Length: 191mm.
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 13mm
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120514 Bi-Hexagon, 12-point socket has the following specifications:Size: 14mm. Length: 38mm.
These Teng Tools wrenches are made from strong chrome vanadium steel. The set consists of 3 hook spanners, with 3 pin adaptors and 2 spare pins. Ideal for use to work on locking nuts which have a series of notches cut in their outer surface. The hook/pin is placed in one of the notches and the handle turned to loosen or tighten the nut. The wrenches are supplied in a handy storage tray with a removable lid and dove tail joints. Suitable for use on its own, or as part of the Teng Tools TC control system. The TTP08 8-piece set contains the following: 3 x Hook handles: 3/4 inch to 2 inch, 1.1/4 inch to 3 inch and 2 in to 4.3/4 in. 3 x Pin adaptors: 4mm, 5mm and 6mm. 2 x Spare pins: 6 and 8mm.
The Britool E117361B 3/8 inch T-handle features a sliding head, is crafted from chrome vanadium steel and finished in high chrome. This product is for manual use only. ISO 3315, DIN 3122, ISO 1174-1.Length: 170mm. Weight: 128g.
The Bahco SL34 3/8in Drive Socket Set contains a selection of sockets made from high-performance alloy steel with a matt finish. The Dynamic Drive™ profile protects the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Contains: 12 x 3/8in Hex Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 22mm 2 x 3/8in Spark Plug Sockets: 16mm (5/8in), 21mm (13/16in) 3 x 1/4in Slotted Bits: 4, 5.5, 7mm4 x 1/4in Phillips Bits: PH1, PH2, PH3, PH46 x 1/4in Hex Bits: 3, 4, 5, 6, 7, 8mm 1 x 3/8in Universal Joint 1 x 3/8in x 1/4in Bit Holder 2 x 3/8in Extension Bars: 75, 150mm 1 x 1/4in Square Female x 1/4in Hexagonal Male Bit Holder 1 x 1/4in Spinner with 2-Component Handle 1 x 3/8in SLIM Quick-Release Ratchet Handle
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 14 x 15mmLength 82mm (3 1/4 in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.The Melco TIM3 ISO Metric Box Spanner is made with 3mm steel and has the following specification: Size: 7 x 8mm.Length: 100mm (4in).
A professional, 3/8in drive, hexagonal, metric deep socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.Size: 21mm.Overall length. 63.5mm
The BlueSpot Deep Metric Impact Sockets are manufactured from heat treated, tempered chrome vanadium steel for strength and durability. Chemically blackened to protect against corrosion. Ideal for use with impact guns and high torque air tools. Complete with handy metal tin for quick and easy storage. 10 x 1/2in Deep Impact Sockets: 10, 11, 13, 14, 17, 18, 19, 21, 22 & 24mm.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44021 Combination Spanner has the following specifications:Head size: 21mm.Length: 233mm.
These Facom R.RC extensions have a 1/4 inch drive to fit 1/4 inch sockets or ratchets. Their extra length means that hard-to-reach bolts and other fasteners are more easily accessed for loosening or tightening. The extensions are finished in polished chrome. Performance: conform to ISO 3316, DIN 3123 and NF ISO 3316.The FCMR209 extension has the following specifications:Length: 55mm.Weight: 30g.
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44018 Combination Spanner has the following specifications:Head size: 18mm.Length: 208mm.
The Facom 467B Series Combination Ratcheting Spanners feature a reversible ratchet system incorporated within a compact ring head and a fixed open end. The wrench is angled at 15° and has a fine ratchet system which allows a 5° working arc. The spanners have a satin chrome finish. The ring end features the innovative Ring Stop system that prevents fasteners from going through or slipping off the wrench whist the open end features anti slip jaw design preventing slippage. Compact I-Beam shaft profile ensures comfort and allows the user to apply higher torque for longer periods. These high performance spanners are suitable for aircraft fasteners with an integral reversing lever which avoids any risk of accidental reversal. Manufactured to ISO 1711-1.1 x Facom 467B.16 Anti Slip Combination Ratcheting Spanner 16mm
The Facom 467B Series Combination Ratcheting Spanners feature a reversible ratchet system incorporated within a compact ring head and a fixed open end. The wrench is angled at 15° and has a fine ratchet system which allows a 5° working arc. The spanners have a satin chrome finish. The ring end features the innovative Ring Stop system that prevents fasteners from going through or slipping off the wrench whist the open end features anti slip jaw design preventing slippage. Compact I-Beam shaft profile ensures comfort and allows the user to apply higher torque for longer periods. These high performance spanners are suitable for aircraft fasteners with an integral reversing lever which avoids any risk of accidental reversal. Manufactured to ISO 1711-1.1 x Facom 467B.6 Anti Slip Combination Ratcheting Spanner 6mm
These Facom R.RC extensions have a 1/4 inch drive to fit 1/4 inch sockets or ratchets. Their extra length means that hard-to-reach bolts and other fasteners are more easily accessed for loosening or tightening. The extensions are finished in polished chrome. Performance: conform to ISO 3316, DIN 3123 and NF ISO 3316.The FCMR215 extension has th following specifications:Length: 150mm.Weight: 65g.
These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners. The sockets are available in a range of metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS27 socket has the following specifications:Socket size: 27.0mm.Length: 44mm.Weight: 164g.
The Britool E117377B Ratchet combination spanners have a 5° ratcheting head and a 12-point OGV® ring end, which is angled at 15° from the handle axis (increment angle 30°). The OGV® Ring profile maximises contact surface with the nut for a longer lifetime.The switch to change ratcheting direction built into the handle prevents accidental change.Forged from Chrome Vanadium steel with a high chrome finish. ISO 691 - ISO 1711-1.The Britool BRIE117378B Ratcheting Spanner 7mm has the following dimensions:Size: 7mmLength: 124mmWeight: 28g
The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117056B Socket 12 Point Standard 1/2 inch Drive 13mm has the following dimensions:Size: 13mmLength: 38mmWeight: 52g
A professional, S2, 1/2in drive hexagon bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55mm.Size 8mm
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120517 Bi-Hexagon, 12-point socket has the following specifications:Size: 17mm. Length: 38mm.
