A professional, 3/8in drive, hexagonal, metric deep socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.Size: 22mm.Overall length. 63.5mm
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 24mmLength: 78mm
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ16LA Deep Socket has the following specifications:Socket size: 16.0mm.Length: 60mm.
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size. 14 x 15mm.Length. 239mm
This Teng Tools 1/2 inch square drive Torx socket is manufactured from high quality chrome vanadium steel to conform to all the latest DIN and ISO standards. The socket is branded and labelled for easy identification, and specially designed to help prevent damage to fastenings.The TENM120714 TX-E 1/2inch square drive socket has the following specifications:Overall length: 37.8mm.Size: 12.8 (E14).
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 8 x 9mm Length 100mm (4 in)
These Facom Trim Clip Removal Pliers are designed for the quick removal of staples, clips, door panels, facia and trim supports etc. without damage. They have a wide nose for undoing facings without risk of breaking or tearing panels and a finger guard to avoid injury. They are designed for accessing difficult-to-reach places with a length of 240 mm.
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 7/16 AFLength 38mm
A professional matt chromed 1/4 square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners.This hexagonal socket has a relatively short depth and a stepped collar on the shank.Overall length 21.2mmSize. 1/4 in AF
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 7mm.Overall length 25.7mm
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
These Facom R.RC extensions have a 1/4 inch drive to fit 1/4 inch sockets or ratchets. Their extra length means that hard-to-reach bolts and other fasteners are more easily accessed for loosening or tightening. The extensions are finished in polished chrome. Performance: conform to ISO 3316, DIN 3123 and NF ISO 3316.The FCMR217 extension has the following specifications:Length: 250mm.Weight: 105g.
This 3/8 inch drive Tamperproof Torx (TPX) socket bit is manufactured from chrome vanadium steel for strength and durability, with an attractive satin finish. The socket is conveniently marked with its size for easy identification. Complies with the latest DIN and ISO standards.The TENM381230 TPX socket bit has the following specifications:Overall Length: 49.5mm.Size: 5.5mm (TPX30).
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 3/4 x 7/8 Whitworth Length 180mm (7 in)
Teng Tools sockets are manufactured from strong chrome vanadium steel in accordance with ISO9000 and AS954. They provide excellent torque, whilst reducing the risk of rounding fasteners. The T3835AF 35 piece socket set contains short and long, six-point sockets in imperial AF sizes. The set also includes a fibre reinforced ratchet handle, universal joint, extension bars and a bit socket, adaptor, spark plug sockets, as well as 11 different bits. The tools and accessories are supplied in a red plastic box with a latch lock, folding handle and hinges with metal pins. The case is fitted with rubber feet to prevent it from sliding. This 35-piece set contains the following: 10 x 3/8in AF Hex Sockets 5/16, 3/8, 7/16, 1/2 , 9/16, 5/8, 11/16, 3/4, 13/16 & 7/8in.6 x 3/8in AF Hex Deep Sockets 3/8, 7/16, 1/2 , 9/16, 11/16 & 3/4in.2 x 3/8in Spark Plug Sockets 16 & 21mm.1 x 3/8in Reversible Ratchet, 1 x 3/8in Universal Joint.2 x 3/8in Extension Bars 100 & 150mm.1 x 3/8-1/2in Adaptor, 1 x 3/8-1/4in Hex Bit Adaptor.2 x 1/4in Slotted Bits: 4 & 5.5mm.2 x 1/4in Phillips Bits: PH1 & PH2.2 x 1/4in Pozidriv Bits: PZ1 & PZ2.2 x 1/4in Hex Bits: 5 & 6mm.3 x 1/4in Torx Bits: TX10, TX15 & TX20.
These Faithfull professional, high quality Combination Spanners are forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Manufactured to DIN 3113 standards. The broached jaws and rings ensure a consistent tolerance and a guaranteed accurate fit. Both the jaw and ring end are set at a 15 degree offset for ease of use in awkward positions.The FAISPAC12 combination spanner is the following size: 12mm.
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 1 AFLength 43mm
A professional 3/8 in drive regular 6 point AF socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety.Manufactured from chrome vanadium steel with a satin finish.Size: 9/16 AFOverall length 25.7mm
A professional, S2, 1/2in drive hexagon bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55mm.Size 14mm
These Facom 12-point OGV sockets have a 3/8 inch drive to fit 3/8 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMJ10LA Deep Socket has the following specifications:Socket size: 10.0mm.Length: 55mm.
Torque wrench with flip reverse ratchet action, and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88. The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45° . Both the torque and angular gauge can be set with the one tool.Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035).Supplied in robust oil resistant case.3/8in square drive.Range 20 to 100 Nm / 15 to 75 ft.lb
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120520 Bi-Hexagon, 12-point socket has the following specifications:Size: 20mm. Length: 38mm.
These Faithfull Chrome Vanadium spanners have flexible ratchet heads, which can turn through 180°, allowing them to be used in more awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.180° head for access into tight places.5° Fine Ratchet Mechanism.Size: 13mm.
A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 14 x 15mmLength 189mm
A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 21 x 23mmLength 247mm
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 9mm
This Teng Tools socket is a professional 3/4 inch drive, metric hexagon socket. The socket is manufactured from chrome vanadium steel for strength and durability and has an attractive satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.Size 36mmLength 58mm
This Teng Tools Professional 3/8in drive S2 hex socket bits made from chrome vanadium steel with a satin finish. Overall Length: 49.5mm.The TENM381108 Hex Socket Bit has the following specifications:Overall length: 49.5mm.AF Size: 1/4 inch.
This Teng Tools 1/2 inch square drive Torx socket is manufactured from high quality chrome vanadium steel to conform to all the latest DIN and ISO standards. The socket is branded and labelled for easy identification, and specially designed to help prevent damage to fastenings.The TENM120720 TX-E 1/2inch square drive socket has the following specifications: Overall length: 37.8mm. Size: 18.4mm (E20).
Teng Tools sockets are manufactured from strong chrome vanadium steel in accordance with ISO 9000 and AS954. They provide excellent torque, whilst reducing the risk of rounding fasteners. This TTX23 socket set consisting of 20 regular and long bits for internal TX heads. It also includes 2 adaptors and a 2 mm hex mini screwdriver.Supplied complete in a handy storage tray. This 23-piece set contains the following: 8 x 40 mm Torx bits with 10 mm hex drive: TX20, TX25, TX27, TX30, TX40, TX45, TX50, and TX55.2 x 40 mm Torx bits with 12 mm hex drive: TX60 and TX70.8 x 75 mm Torx bits with 10 mm hex drive: TX20, TX25, TX27, TX30, TX40, TX45, TX50, and TX55. 2 x 75 mm Torx bits with 12 mm hex drive: TX60 and TX70. 1 x 1/2inch drive 10 mm hex bit adaptor. 1 x 1/2inch drive 12 mm hex bit adaptor. 1 x 2 mm hex mini screwdriver.
