The Teng 1/2in Hex Bit Impact Socket is made from chrome molybdenum with a black finish. Fitted with a locking pin and retaining ring facility. Each socket is individually branded and size marked for quick identification.This Teng 1/2in Hex Bit Impact Socket has the following specification: Size: 14mmLength: 78mm
A 1/2in square drive socket converter with T handle hole facility manufactured from chrome vanadium steel with a satin finish. 1/2in Female to 3/8in Male.Length: 40mm.
This Teng Tools Oil Filter Wrench has a nylon webbing strap for the effective removal of spin-on type oil filters. Supplied with a 1/2inch drive carbon steel adaptor. Capacity: 130mm.
This Teng Tools 9 piece set consists of 1/2inch drive bit sockets for internal Torx heads. The bit sockets are manufactured from chrome vanadium steel for strength and durability and have a satin chrome finish. They are supplied on a clip rail, which is ideal for both wall mounting and for use in a toolbox. The set comprises the following bit socket sizes:TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55 and TX60.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940646 Impact Socket has the following specifications: Length: 95mm.Size: 46mm.
This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.The TENM1205306 1/2inch square drive socket has the following specifications:Size: 30mm.Length: 43mm.
A professional 1/4in square drive matt chromed deep hexagon socket. Produced in accordance with ISO 9000 and AS 954 specifications. Features the Teng Tools hip grip system for increased torque and reduced risk of rounding fasteners. Overall Length: 49.5mm.Size 1/4 in AF
This Teng Tools T1424 24 Piece 1/4 inch drive socket set, contains regular 10 point sockets, a mini palm ratchet, 100mm extension bar, a bits holder as well as Phillips, Pozidriv, Flat and Torx bits. The ratchet handle is reversible and is fibre reinforced to provide extra durability. The tools are conveniently supplied in plastic storage case with snap lock and metal pin hinges. The set consists of: 10 x 1/4in Hex Sockets: 4, 5, 5.5, 6, 7, 8, 10, 11, 12 & 13mm.1 x 1/4in Reversible Ratchet1 x 1/4in Extension Bar.1 x 1/4in Universal Joint.1 x 1/4in Hex Bit Holder.2 x 1/4in Slotted Bits: 4 & 5.5mm.2 x 1/4in Phillips Bits: PH1 & PH2.3 X 1/4in Hex Bits: 3, 5 & 6mm3 x 1/4in Torx Bits: TX10, TX15 & TX20. Case dimensions: 170 x 90 x 35mm.
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 15mm.Overall length 25.7mm
This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.TENM1205146 1/2inch square drive socket has the following specifications:Size: 14mm.Length 38mm.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940632 Impact Socket has the following specifications: Length: 95mm.Size: 32mm.
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 21mm.Overall length 29mm
3/8in square drive spinner handle for sockets and socket tools. Handle part has internal square drive for connection to e.g. a T-handle. Length: 250mm (10in).
This Teng Tools Socket is a professional, 3/8 inch drive regular 6 point metric socket, produced in accordance with ISO 9000 and AS954 specifications. It provides excellent torque and reduces the risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety. The socket is manufactured from chrome vanadium steel with a satin finish.Size: 9mm.Overall length 25.7mm
This Teng Tools socket is a professional 3/4 inch drive, metric hexagon socket. The socket is manufactured from chrome vanadium steel for strength and durability and has an attractive satin finish. The socket is produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners.The TENM340522 Hex 3/4 inch drive socket has the following specifications:Size: 22mm. Length: 50mm.
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 11/16 AFLength 38mm
This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.The TENM1205186 1/2inch square drive socket has the following specifications:Size: 18mm.Length: 38mm.
This Teng Tools Professional 3/8in drive S2 hex socket bits made from chrome vanadium steel with a satin finish. Overall Length: 49.5mm.The TENM381110 S2 Hex Socket Bit has the following specifications:Overall length: 49.5mm.AF Size: 5/16 inch.
The Teng TTMDQ49 Bit & Quick Chuck Handle Set contains a selection of regular sockets as well as a comprehensive range of bits together with the Quick Chuck Handle driver and 1/4in drive ratchet head adaptor. Supplied in the unique Teng Tools TC tray for use on its own or as part of the Teng Tools Tool Control System. Contents: 3 x 25mm Phillips Bits: PH1, PH2, PH33 x 25mm Pozi Bits: PZ1, PZ2, PZ3 6 x 25mm TORX Bits: TX10, TX15, TX20, TX25, TX30, TX403 x 25mm TORX Security Bits: TTX20, TTX25, TTX306 x 25mm Hex Bits: 2, 3, 4, 5, 6, 8mm3 x 25mm Robertson Bits: 1, 2, 3 2 x 89mm Phillips Bits: PH1, PH21 x 89mm Pozi Bit: PZ23 x 89mm TORX Bits: TX10, TX20, TX251 x 89mm Slotted Bit: 4mm1 x 89mm Hex Bit: 4mm 11 x 1/4in Drive Sockets: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm 1 x 1/4in Drive Quick Chuck Driver 147mm1 x 1/4in Drive Ratchet Head Adaptor1 x 1/4in M:1/4in Hex Adaptor
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.1 x TEN600519R Ratchet Combination Spanner has the following specifications:Size: 19mm. Length: 248mm.
Torque wrench with flip reverse ratchet action, and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88. The unique angular gauge, for use after tightening stretch bolts, allows bolts to be tightened over and above a pre-set torque rating by so many degrees, e.g. 45° . Both the torque and angular gauge can be set with the one tool.Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035).Supplied in robust oil resistant case.3/8in square drive.Range 5 to 25 Nm / 4 to 18 ft.lb
Melco Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. The tubular box spanner is manufactured from bright plated steel and is able to accommodate a tommy bar.The Melco TA4 A/F Box Spanner is made with 3mm steel and has the following specification: Size: 7/16 x 1/2in.Length: 100mm (4in).
This Blue Spot socket set contains 11 useful 1/4 inch square drive sockets which are made from chrome vanadium steel and which have a deep reach for better access. The set contains the following sizes:4, 4.5, 5, 6, 7, 8 ,9, 10, 11, 12 and 13mm. Supplied with a storage rack.
The BlueSpot Tools 1/2in, 3/8in & 1/4in Metric Socket Set. Manufactured from chrome vanadium for increased durability. Knurled sockets to provide a secure grip. Supplied in a sturdy plastic case with metal clips for quick and convenient storage. Contains: 10 x 1/4in Hex Metric Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13mm.10 x 1/4in Hex SAE Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 and 1/2in.4 x 1/4in Deep Wall Sockets: 8, 9, 10 and 11mm. 1 x 1/4in Extension Bar 2in.1 x 1/4in Universal Joint.1 x 1/4in Coupler.1 x 1/4in Spinner Handle.1 x 1/4in Quick Release Ratchet Handle. 7 x 25mm TORX Bits: T10, T15, T20, T25, T27, T30 and T40. 11 x 3/8in Hex Metric Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.9 x 3/8in Hex SAE Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8in.4 x 3/8in Deep Wall Sockets: 13, 14, 15 and 17mm.8 x 3/8in E-Sockets: E8, E10, E11, E12, E14, E16, E18 and E20.2 x 3/8inSpark Plug Sockets: 16 and 21mm. 2 x 3/8in Extention Bars: 3in and 6in.1 x 3/8in Universal Joint.1 x 3/8in Quick Release Ratchet Handle (72 Tooth). 2 x 3/8in Philips Bit Sockets: PH1 and PH2.2 x 3/8in Pozi Bit Sockets: PZ1 and PZ2.7 x 3/8in TORX Bit Sockets: T20, T30, T40, T45, T50, T55 and T60.4 x 3/8in Hex Bit Sockets: H3, H4, H5 and H6.2 x 3/8in SlottedBit Sockets:5.5 and 6.5mm. 7 x 1/2in Hex Metric Sockets: 20, 21, 22, 24, 27, 30 and 32mm.4 x 1/2in Hex SAE Sockets: 15/16, 1, 1-1/16 and 1-1/4in.4 x 1/2in Impact Sockets: 17, 19, 21 and 23mm. 2 x 1/2in Extension Bars: 5in and 10in.1 x 1/2in Universal Joint.1 x 1/2in Quick Release Ratchet Handle (72 Tooth). 10 x Combination Spanners: 8, 9, 10, 11, 12, 13, 14, 17, 18 and 19mm.
The BlueSpot Double End Ratchet Spanner is manufactured from chrome vanadium steel. Heat-treated and nickel-plated for increased durability. Fully polished mirror finish. The 5 degree ratcheting increment makes it ideal for use in tight spaces. 72 teeth.1 x BlueSpot Tools Double End Ratchet Spanner (17-19mm).
The ITL Torque Wrench is fully insulated with a unique injection-moulding process. Its Ovi-Grip handle provides superior comfort and includes an integral increment gauge for accuracy. Torque range is achieved in clockwise and anticlockwise directions via a unique removable drive core.1 x ITL Insulated Torque Wrench 3/8in Drive 12-60Nm.
These Faithfull Chrome Vanadium spanners have flexible ratchet heads, which can turn through 180°, allowing them to be used in more awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.180° head for access into tight places.5° Fine Ratchet Mechanism. 9 piece combination spanner/ratchet set, consisting of the following sizes:8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm and 19mm.Supplied and held in a convenient plastic clip store.
These Faithfull Chrome Vanadium spanners have flexible ratchet heads, which can turn through 180°, allowing them to be used in more awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.180° head for access into tight places.5° Fine Ratchet Mechanism.Size: 19mm.
The Norbar TTi Wrenches are accurate upto ±3%, which exceeds all international standards for torque wrenches. Every wrench comes with a traceable calibration certificate. Quick and light adjustment over the entire scale can be quickly achieved with minimal effort in approximately 10 complete turns (exact number varies by model) and they have a micrometer scale for simple and error free setting. All models have an adjustment lock to prevent accidental adjustment of the set torque. The ratchets have a narrow engagement angle of 5º on the TTi50 and 6º on all other models, allowing easy positioning of the tool in the tight confines of today’s vehicles and machines. They also have a comfortable, durable handle that is constructed using 2 materials: a base material for strength overlaid with a soft feel grip for comfort and slip resistance. The handle and lens resist chemicals in common usage in the automotive, aviation and industrial environments.TTi 50 Torque Wrench 1/2in Square Drive 10-50Nm specification detailed below.
The Mega Drive range of screwdrivers feature a unique ergonomically designed, bi-material handle which give excellent grip. With exhaustive quality control tests, these Teng Tools screwdrivers ensure that the head fits securely into the screwdriver head, allowing torque to be applied more easily. The screwdriver blades are made from strong Chrome Vanadium Steel with black tips, and are manufactured to DN5264. Supplied in storage tray. Contents: 3 x Flat Screwdrivers: 3 x 75, 5 x 75 & 6 x 100mm.3 x Phillips Screwdrivers: PH0 x 75mm, PH1 x 75mm, PH2 x 100mm.1 x Pozidrive Screwdriver: PZ2 x 100mm. Specification Dimensions: 265 x 142 x 50mm.Weight : 0.6Kg.
Specification: Adaptors: 1/4in male hex and 1/4in female square driveRange: 0.5-10NmAccuracy: ±1% torque reading accuracy (±2% when below 10% of range for the 1,100Nm TruCheck™ 2 model)Display: LCD DisplayTemperature Range: Operating: 0°C to +50°C, Storage: 20°C to +70°CAuto Reset Hold Time: 1, 2 or 3 secondsPower Consumption: 0.5WEnvironment: IP 40Weight: 1.4kg Requires 2 x Hexagon Socket Head Cap Screws ISO 4762 - M10 - 12.9 to fix in position (not supplied).
