The Makita DCL180 Handheld Vacuum offers a strong suction power and a large dust capacity, ideal for heavy-duty applications. It produces low noise levels making it ideal for quieter cleaning operations, especially suited to domestic and residential areas. It is fitted with an ergonomic rubber handle that helps to reduce fatigue during prolonged use. Bare Unit, No Battery or Charger Specification: Capacity: 0.65 litresMax. Airflow: 1.3 m³/min.Max. Sealed Suction: 3.6 kPaWeight: 1.2kg
The Makita DCG180 Caulking Gun has a variable speed control trigger and a speed control dial for precise material flow. Fitted with a plunger rod for bulk sealant, it can also be used as a suction plunger to pump sealant into the 600ml holder from bulk container. The 360° rotating sealant holder has an anti-drip function. Other features include an LED job light and trigger lock. Compatible with 300ml cartridge, 600ml sausage pack and bulk sealant. Comes as a Bare Unit, No Battery or Charger. Specification: Carrier Size: 300-600mlPush Speed: 28mm/secPush Force: 5,000N (508kg)Weight: 2.9kg
The Makita DCE090ZX1 Brushless LXT Power Cutter has a powerful 36V DC motor drive system that is driven by 2 x 18V Li-ion batteries (not supplied). A lock-off button ensures safe operation and an indicator lamp will warn of overload. There is also an electric brake and Active Feedback Sensing Technology which acts to shut down the tool if a sudden decrease in rotation speed occurs. An incorporated LED job light ensures your work is clearly illuminated and the tool also offers a range of safety features. A secure battery cover protects the battery from water during wet cutting tasks. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 6,600/min.Max. Wheel Diameter: 230mmBore Diameter: 22.23mmMax. Wheel Thickness: 3.0mmMax. Cutting Capacity: 88mmWeight: 5.6kg
The Makita DC18RC 7.2-18V Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, keeping the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. With 3 active charging colours to help identify when the battery is charged, and to what level. When it is used in conjunction with the charging adaptor ADP0, this charger offers also the possibility of charging NiMH slide on batteries of 9.6-24V batteries. Or when used with charging adaptor ADP04, this charger offers the possibility to charge NiCad and NiMH rod and block batteries of 7.2-18V batteries. The DC18RC is compatible with the following battery models: BL1830, BL1430, BL3626, BL3622, BL1415, BL1013, and BL0710.
The Makita DBS180 LXT Belt Sander has a powerful brushless motor for increased runtime and a lock on function for reduced fatigue during long periods of use. An electric brake provides increased user safety. It has an adjustable sanding arm that pivots up to 160° for compact storage. For added safety the DBS180 will not start if the sanding arm is folded over 90°. There is also an LED job light and it is connectible to dust extractor with correct attachment (NOT supplied). Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 600-1,700/min.Belt Size: 9 x 533mmWeight: 1.8kg
The Makita DBO180 125mm Random Orbital Sander is simple to operate via the electronic push button switch with pre-selectable 3-speed settings. It has a compact design with a lower centre of gravity for better manoeuvrability. Ergonomically designed to provide the best possible grip for comfortable handling. Dust is kept to a minimum, eight holes on the base plate transfer the dust to the rear mounted bag or you can use the dust port to attach a dust extractor. Comes as a Bare Unit, No Battery or Charger. Supplied with 1 x Dust Bag Specification: Oscillating Speed: 7,000/9,500/11,000/min.Sanding Stroke per Min.: 14,000/19,000/22,000/spmOrbit Diameter: 2.8mmPaper Fastening: Hook & LoopPad Size: 123mmPaper Size: 125mmWeight: 1.7kg
The Makita DBN500 LXT Brad Nailer is powered by an 18V Li-ion battery (NOT supplied). The compressed air (generated by piston action linked with DC motor) moves the driving guide. The mechanism provides less reaction force and 'air nailer like' shot feeling to the operator. Its slim nose allows for better visibility for easy access to the point you aim at. Enables user to shoot nails into tight spaces. The rocker switch allows you to select between sequential and bump fire mode. It also features an LED job light for visibility in dark work areas. Comes as a Bare Unit, No Battery or Charger. Specification: Magazine Capacity: 110 BradsFires: 18 Ga Nails: Length: 15-50mmShots Per Battery Charge: 1,000Weight: 3.2kg
The Makita D-40559 SDS Max Chisel Set is designed for use with SDS Max Hammer Drills. The chisels are extremely resistant to wear and deformation. Ideal for demolition, removing render, lifting floor tiles etc. Supplied in a durable aluminium carry case with the following: 2 x Bull Points: 300, 400mm2 x Cold Chisels: 300, 400mm
The Makita D-30667 Bit Set Counter Display contains 12 x D-30667 Bit Sets, 31 Piece. 31 Piece D-30667 Bit Set supplied in a handy-sized plastic case with a belt clip. Contains: 7 x 25mm Phillips Bits: PH1(x2), PH2(x4) and PH38 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x5) and PZ312 x 25mm TORX Bits: TX10(x2), TX15(x2), TX20(x2), TX25(x3), TX30(x2) and TX403 x 25mm Slotted Bits: 4, 5.5 and 6.5mm1 x Quick-Release Bit Holder
Makita 17 piece SDS Plus Drill Bit Set provides a good cutting performance for concrete, demolition, render, chasing and fixings. Contains the following: 12 x SDS Plus Chisel Bits: 5 x 110, 5.5 x 110, 6 x 110, 6 x 160, 7 x 160, 8 x 110, 8 x 160, 8 x 210, 10 x 110, 10 x 160, 10 x 210, 14 x 260mm 2 x Bull Points: 140, 260mm 2 x Cold Chisels: 20 x 140, 20 x 250mm 1 x Scaling Chisel: 40 x 250mm
The Makita D-08757 4 Piece SDS-Plus Chisel Assortment contains a selection suitable for concrete, demolition, render and chasing applications. These cold chisels have been forged and tempered for increased durability. Supplied in a carry case, allowing you keep all your cold chisels together and prevent unnecessary damage. Contains: 2 x 250mm Bull Point Cold Chisels.1 x 250mm Flat Cold Chisel.
The Makita CLX228AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V HP333D 12Vmax CXT Combi Drill with 2 mechanical gears and a variable speed control trigger with both forward and reverse rotation. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. No Load Speed: 0-450/0-1,700/min.Impact Rate: 0-6,750/0-25,500/bpmMax. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mm, Masonry 8mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita CLX224AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V DF333D 12Vmax CXT Drill Driver with 2 mechanical gears and a variable speed control trigger. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Chuck: 0.8-10mm KeylessNo Load Speed: 0-450/0-1,700/min.Max. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 1 MAKPAC Connector Case.
