The Makita DGD800 LXT Die Grinder has been designed to cover a range of metalworking surface-prep applications including grinding, smoothing and cutting. It has a long nose and an easy to grip motor housing with a small circumference. A round collet nut reduces the risk of damages and scratches to the workpiece. With slide switch operation for ease of use, it also has a lock-on feature to reduce fatigue. The body features vent slots that have been designed to direct exhaust air away from the user. Fitted with a rubber cover that provides heat insulation and non-slip surface for a sure grip. Comes as a Bare Unit, No Battery or Charger. Specification: Collet Capacity: 6mmNo Load Speed: 25,000/min.Weight: 1.7kg
The Makita DGA517 125mm Paddle Switch Grinder is fitted with a brushless motor and has a feature that lets the user adjust the torque and speed according to the load condition. Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for an optimum operation. There is also a variable speed control dial, lock-on function and an electronic current limiter for overload protection. The body of the grinder is covered with an ergonomic soft grip for increased comfort and control. There are a number of safety features on this model, including: an anti-restart function, electric brake and Active Feedback Sensing Technology (AFT) that shuts down the tool to protect the user if the rotation speed suddenly slows down. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Disc Diameter: 125mmMax. Wheel Thickness: 7.2mmBore Diameter: 22.23mmWeight: 2.4kg
The Makita DGA513 125mm Grinder is fitted with a brushless motor and has a feature that lets the user adjust the torque and speed according to the load condition. Automatic Torque Drive Technology automatically changes the cutting speed according to load condition for an optimum operation. There is also a variable speed control dial, lock-on function and an electronic current limiter for overload protection. The body of the grinder is covered with an ergonomic soft grip for increased comfort and control. There are a number of safety features on this model, including: an anti-restart function, electric brake and Active Feedback Sensing Technology (AFT) that shuts down the tool to protect the user if the rotation speed suddenly slows down. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Disc Diameter: 125mmMax. Wheel Thickness: 7.2mmBore Diameter: 22.23mmWeight: 2.4kg
The Makita DGA467Z Brushless LXT Angle Grinder has an electronic current limiter for overload protection, soft start and anti-restart function for ease of use. For added safety there is also an electric brake. The ergonomically designed handle features a soft grip and safety paddle control switch. The speed is easily controlled via the variable speed control dial. Active Feedback Sensing Technology (AFT): shuts down the tool to protect the user if the rotation speed suddenly slows down. Automatic Torque Drive Technology (ATDT): automatically changes the cutting speed according to load condition for optimum operation. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Wheel Size: 115 x 22.23mm BoreMax Wheel Thickness: 7.2mmWeight: 3.1kg
The Makita DGA463 Brushless LXT Grinder is fitted with an on/off slide switch and lock-on function for ease of use. The brushless motor provides increased efficiency. It has a variable speed control dial with built-in Automatic Torque Drive Technology: automatically changes the cutting speed according to load condition for optimum operation. This grinder features a number of safety features: anti-restart function, electric brake, soft start, electronic current limiter for overload protection and Active Feedback Sensing Technology (AFT): shuts down the tool to protect the user if the rotation speed suddenly slows down. The body features an ergonomic soft grip for reduced fatigue during prolonged use. There is also a handy battery fuel gauge and removable dust covers. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,000-8,500/min.Max. Wheel Diameter: 115mmBore Diameter: 22.23mmMax. Wheel Thickness: 7.2mmWeight: 2.3kg
The Makita DGA452 LXT Angle Grinder has been developed as the first Angle grinder of the MAKSTAR series models. It has an easy grip body that has high comfort grips. Fitted with an anti-restart function with a warning lamp and it is capable of using wheels or discs that are designed for use with mains grinders. The electronic current limiter is also fitted with a warning lamp and a 4-pole motor. Specification No Load Speed: 10,000/min.Wheel Diameter: 115mm Weight: 2.3kgThe Makita DGA452Z LXT Angle Grinder is supplied as a Bare Unit, No Battery or Charger.
The Makita DFS451Z LXT Screwdriver is a well-balanced tool, designed for easy handling and manoeuvrability. Fitted with a variable speed control switch, ideal for drywall applications. The ergonomic handle with rubber grips provides increased user control and reduces user fatigue. It also features an LED job light with afterglow function. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-4,000/min.Capacity: Drywall Screw 4mmWeight: 1.5kg
The Makita DFS251 Brushless LXT TEK Screwdriver has a durable aluminium gear housing. It is ideal for repetitive screwdriving tasks, especially drywall tasks. Fitted with a highly efficient brushless motor and 'Push drive technology', so that the motor only starts once the fixing is engaged to the drive unit which helps to significantly increase battery runtime. It has a compact, lightweight design and an ergonomic handle with rubber grips for increased user control and less fatigue. Other features include a lock-on trigger function, built-in belt clip and an LED job light with afterglow function. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,500/min.Capacity: Drywall Screw 5mm, Self-Drilling Screw 6mmWeight: 1.5kg
The Makita DFR750 Auto-Feed Screwdriver offers high durability and features a more reliable rigid aluminium casing attachment. The stopper base and the anti-tilt device prevent the screws from swaying and there is a rubber cap securely fixed to stopper base. It has a dustproof construction for smooth sliding action and a foldable screw guide to keep the screw strip tangle free. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 4,000/min.Max. Drywall Screw: 4 x 75mmScrew Size Range: 45-75mmWeight: 2.3kg Noise Sound Pressure: 76 dB(A)Noise K Factor: 3 dB(A)Vibration K Factor: 1.5m/sec²Vibration No Load: 2.5m/sec²
The Makita DFR550 Auto-Feed Screwdriver offers high durability and features a more reliable casing attachment. It has a dustproof construction and is fitted with an anti-tilt device to prevent screws from swaying. The foldable screw guide keeps the screw strip tangle free and it is fitted with a silent clutch. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 4,000/min.Max. Drywall Screw: 4 x 55mmScrew Size Range: 25-55mmWeight: 2.3kg Noise Sound Pressure: 78 dB(A)Noise K Factor: 3 dB(A)Vibration K Factor: 1.5m/sec²Vibration No Load: 2.5m/sec²
The Makita DFN350 LXT 18G Brad Nailer has been specially designed for light-duty applications. Its contact tip has been designed for easy nail placement, it also features an anti-slip surface so it grips the workpiece firmly regardless of the position of the contact tip. Fitted with an ergonomically designed high comfort grip and a trigger lock for added user safety. Comes as a Bare Unit, No Battery or Charger. Specification: Nail Length: 15-35mmNail Gauge: 18Nail Capacity: 100Weight: 2.1kg
The Makita DEBWST06 Adjustable Mitre Saw Stand has a sturdy yet lightweight aluminium construction with a total weight of 15.3kg. It has a maximum extended width of up to 2550mm. Easy to assemble, it features tool-less installation and removal of the mitre saw and trolley castors. Compatible with all Makita mitre saws except for the following models: DLS600, LH1040/F and LH1201FL. Supplied with: 1 x Saw Mount Bracket Set, 1 x Box Wrench, 1 x Hex Bolt and 1 x Flat Washer. Specification: Height: 850mmClosed Length: 1.05mOpen Length: 2.55mMax. Loading: 225kgWeight: 15.3kg
The Makita DDF482 LXT Drill Driver has a 2-speed gearbox and variable speed trigger with both forward and reverse rotation. The compact, lightweight design incorporates an ergonomic soft grip. Fitted with single sleeve, keyless drill chuck for easy bit installation and removal. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Comes as a Bare Unit, No Battery or Charger. Specification: Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Max. Torque: 62Nm, Settings: 21 + DrillDrilling Capacity: Wood 38mm, Steel 13mmWeight: 1.5kg
Makita DDF458Z LXT Drill Driver with enhanced dust and drip-proof performance is ideal for use in outdoor applications or harsh environments. Its single sleeve keyless chuck allows for easy bit installation/removal, even with one hand. There is also a twin LED job light with pre-glow and afterglow functions. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 400/0-2,000/min.Max. Torque: 91Nm.Torque Settings: 21 + Drill.Capacity: Steel 13mm, Wood 65mm.Weight: 2.1kg.
The Makita DDF453 LXT Drill Driver has a 2-speed gearbox and variable speed trigger. The compact, lightweight design incorporates an ergonomic soft grip. Fitted with single sleeve, keyless drill chuck for easy bit installation and removal. Comes as a Bare Unit, No Battery or Charger. Specification: Chuck: 13mm KeylessNo Load Speed: 0-400/0-1,300/min.Max. Torque: 42Nm, Settings: 16 + DrillDrilling Capacity: Wood 36mm, Steel 13mmWeight: 1.7kg
The Makita DDF083 Drill Driver has a brushless motor for increased power and run time. Whilst the variable speed trigger and 2 mechanical gears provide increased control. It offers both forward and reverse rotation. The body is fitted with an ergonomically designed comfort grip for increased user comfort. For added user safety there is an electric brake. Other features include a belt clip and LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-500/0-1,700/min.Torque Settings: 20 + DrillMax. Torque: 23/40NmCapacity: Wood 36mm, Steel 13mmWeight: 1.1kg
The Makita DDA351 LXT Angle Drill is fitted with a keyless chuck and a high power 4-pole motor for excellent drilling performance. Conveniently located push button for forward and reverse actions and a large trigger with high comfort grips for decreased user fatigue in prolonged use. There is also an LED job light with afterglow. Comes as a Bare Unit, No Battery or Charger. Specification No Load Speed: 0-1,800/min.Max. Torque: 13.7NmCapacity: Wood: 25mm, Steel: 10mmWeight: 1.8kg
The Makita DCS552 Metal Cutting Circular Saw has a heavy-gauge, precision machined stainless steel base plate for smooth, accurate cutting and added durability. With a built-in dust collection system for easy disposal, metal chips/dust can be thrown away by opening the cap of the dust box. It has a compact and lightweight design with a flat motor housing end and a large view window that allows for easy cutting. There is also an electric brake for added user safety and an LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,600/min.Blade Diameter x Bore: 136 x 20mmMax. Cut: @ 0º 50.5mmWeight: 2.4kg
The Makita DCO180 Drywall Cutter has been designed for cutting holes in drywall, at either construction or renovation sites. It has a high rotation speed for fast cutting. The anti-restart function prevents accidental restart of the tool, even if the switch is in the 'o' position when a new battery is installed. The compact, lightweight design features an ergonomic, barrel handle with soft grip for a secure, comfortable hold whilst minimising hand fatigue and pain. For added safety there is an electronic current limiter for overload protection. Comes as a Bare Unit, No Battery or Charger. Specification: Collet Capacity: 1/8inStrokes at No Load: 30,000/min.Stroke Length: 11.5-31.0mmWeight: 1.7kg
The Makita DCM501 Cordless Coffee Maker is compatible with 60mm coffee pods as well as ground coffee. Its boil dry protection function prevents the machine from burning out: if water empties and temperature inside increases, the sensor will turn off power supply automatically. The body features battery ports for LXT and CXT batteries and comes with a protection cover for empty battery terminal. There is also a carry handle for easy transport. Supplied with a dedicated 240ml cup that has been designed to fit in the machine without leaving a gap, which protects against splash and dirt entry. Commercial cups up to 90mm height will also fit the machine. Bare Unit, No Battery or Charger. Specification: Voltage: 10.8-18VBrew Capacity: Single CXT Battery: 260ml, Single 14.4V Battery (3.0Ah): 260ml, 18V Battery: 3.0Ah: 320ml, 6.0Ah: 640mlBrew Time (160ml): CXT: 7 min., 14.4/18V: 5 min.Compatible Coffee Pod: 60mm typeWeight: 2.2kg
The Makita DCL282 Brushless LXT Vacuum Cleaner won't lose suction over time and has 3 power settings. Ideal for personal use and in commercial areas. Quiet with minimal vibration so it can be used in a busy office. Fitted with an LED job light for improved visibility in low lighting areas. The pipe is fixed in place by the locking mechanism to prevent any spillages whilst cleaning up. Simple dust bag change; push one button to open the front cover. Accepts disposable paper dust bags as well as cloth dust bags. Bare Unit - No Battery or Charger supplied. Specification: Max. Airflow: 1.5 m³/min.Max. Sealed Suction: 8.2 kPaCapacity: Cloth Bag 500ml, Paper Bag 330mlWeight: 1.3kg
The Makita DCL182Z LXT Vacuum Cleaner has a compact design and an ergonomic soft grip for increased comfort. With a touch button switch with high/low suction power settings. Accepts disposable paper dust bags as well as cloth dust bags. Simply by pushing a button, you can open the front cover for easy dust bag change. Bare Unit - No Battery or Charger supplied. Supplied with: 1 x Nozzle, 1 x Straight Pipe, 1 x Sash Nozzle, 1 x Cloth Bag and 4 x Dust Bags. Specification: Max. Airflow: 1.4 m³/min.Max. Sealed Suction: 4.0 kPaSuction Power: 11/30WDust Capacity: Cloth Dust Bag 500ml, Paper Dust Bag 330mlWeight: 1.3kg
