The 45 Knipex Insulated Twin Wire Ferrules by DIN colour code. Supplied in a practical dispenser box with rotating lid, complete with opening to remove individual wire ferrules. Format: Ø 90mm, height 44mm. Contents: 20 Wire Ferrules 2 x 4mm², 10 Wire Ferrules 2 x 6mm², 10 Wire Ferrules 2 x 10mm², 5 Wire Ferrules 2 x 16mm².
200 Piece Knipex Insulated Twin Wire Ferrules by DIN colour code. Supplied in a practical dispenser box with rotating lid, complete with opening to remove individual wire ferrules. Format: Ø 90mm, height 44mm. Contents: 50 Wire Ferrules each for 2 x 0,75mm² / 2 x 1mm² / 2 x 1,5mm² / 2 x 2,5mm².
The Knipex Crimping Pliers made for cutting cables, stripping wire and crimping insulated terminals, heat shrinkable sleeve connectors and non-insulated crimp terminals according to DIN 46234. There are also threaded holes for cutting copper and brass screws threaded M2.6, M3, M3.5, M4 and M5. The handles are fitted with multi-component grips for increased comfort. A bolted joint provides higher stability and even movement. Specifications: Capacity: 0.5-6.0mm². Number of Crimp Profiles: 3. AWG:20-10. Overall Length: 240mm.
Knipex VDE StepCut XL Cable Shears have a large cutting capacity and provide noticeably easier cutting than compact cable shears. The cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC. With dual cutting areas: the stepped cutting edge holds small and larger cables close to the joint during the cut; the front cutting edge cuts very large cables step by step. They offer easy one or two-handed operation with minimum handle opening for large cable diameters. The adjustable, high-leverage bolted joint provides precise and smooth cutting. Fitted with VDE multi-component grip. VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A pinch guard prevents operators' fingers being pinched. NOT suitable for steel-reinforced cables, e.g. ACSR. Specifications: Cutting Capacity: Solid Copper or Aluminium Cables: 35mm², Stranded Cables: 70mm²and Fine Stranded Cables: 120mm². Overall Length: 225mm.
Knipex Anvil Shears made with opening spring and locking device. For cutting soft materials without damage, e.g. rubber profiles, PVC, leather, wood, hoses etc. Specifications: Blade Length: 40mm. Cutting Capacity: Round Material up to Ø 25mm. Flat Material max. width of 40mm and height of 7.5mm. Overall Length: 200mm.
The Knipex Tile Breaking Pliers built for the precise cutting (breaking) of tiles and porcelain stoneware after scoring with a tile cutter. They can easily be adjusted to the required tile thickness at the press of a button. Provides a great crushing force thanks to a10-fold increase of manual force. The positioning jaw is made from soft, stable plastic, this helps to prevent damage.
The Knipex Revolving Punch Pliers with six interchangeable punches. Use to punch holes into leather, textiles and plastic material. Powder-coated for reliable protection against rust. Fitted with an opening spring and locking device for ease of use. Specifications: Punch Ø: 2.0, 2.5, 3.0, 3.5, 4.0, 5.0mm. Overall Length: 220mm.
The Knipex TubiX S Pipe Cutter has been designed for pipe cutting in the tightest spaces. It has a very small cutting circle and a QuickLock one-hand locking mechanism for independent holding and clamping on the pipe. Fits in your pocket and cuts stainless steel. Cuts pipes with Ø 3 – 30mm (1/8 – 1 1/8in) with wall thicknesses up to 2mm. The cutting wheel made of high-grade ball-bearing steel. Both the cutting wheel and guide rollers feature high-quality needle bearings. Pipe diameter can be preset with the scale and clipped on to the pipe by spring-loaded cutting wheel. Its optimised turning knob with textured thumb recess provides 20 % higher torque and prevents slipping, even in wet conditions.The cutting wheel is easy to change,a spare wheel is stored in the turning knob.
The Knipex 90 25 25 Pipe Cutter cuts aluminium composite and plastic conduit pipes more easily than conventional shears with a fixed blade. Also suitable for composite pipes with increased aluminium layer thickness (e.g. Geberit Mepla). Wide plastic supports allow perfect right-angled cuts. Up to 60% less effort required when cutting. The freely rotating cutting wheel allows the pipe to be rotated with minimal friction when cutting.Optimum cutting results. The rotation allows the cutting wheel to penetrate the pipe effortlessly with minimal deformation. Fitted with ergonomic, multi-component handles for added comfort. There is also a locking mechanism for safe transport. Specifications: Cutting Capacity: Plastic and Composite Pipes: Ø 26mm.
Pack of 3 Knipex 86 09 300 V01 Protective Jaws. The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 300mm
Pack of 3 Knipex 86 09 250 V01 Protective Jaws. Suitable for all 86 XX 250 models (models from 2019). The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 250mm
Pack of 3 Knipex 86 09 180 V01 Protective Jaws. Suitable for all 86 XX 180 models (models from 2019). The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 180mm
The Knipex 85 51 180 A Spring Hose Clamp Pliers feature a quick-set adjustment adjusted by shifting directly onto the workpiece. Specifications: Length: 180mm. Capacity: 50mm. Adjustment Positions: 15. Weight: 170g. The Knipex 85 Series Spring Hose Clamp Pliers are made from Chrome vanadium, forged, oil-hardened electric steel. They are fitted with rotatable, universal grip inserts for reliably gripping the clamps in all positions. These clamps offer extremely good leverage which allows clamps to be opened easily without great effort. With its slim head design, narrow head width and rotatable grip inserts, it is an ideal tool, especially in confined areas. Can be used for standard, space-saving, spring wire hose clamps and for spring band clamps. 180mm
Knipex Cycle Pliers come with a 20° angled head for very narrow screw connections. Fitted with plastic coated handles for added comfort. Specifications: Overall Length: 200mm. Head Thickness 3.5mm. Recess Ø: 6/10mm.
The Knipex Straight Head Cycle Pliers for very narrow screw connections. Fitted with plastic coated handles for added comfort. Specifications: Overall Length: 200mm. Head Thickness 3.5mm. Recess Ø: 6/10mm.
This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 560mm. Clamping Capacity: Pipes 70mm (2.3/4in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 560mm
This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 420mm. Clamping Capacity: Pipes 60mm (2.3/8in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 420mm
This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 330mm. Clamping Capacity: Pipes 42mm (1.5/8in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 330mm
Knipex Diagonal Cutters come with an opening spring. For nearly flush cutting of moulded plastic components from sprues. Fitted with plastic coated handles for added comfort. Specification: Overall Length: 160mm.
These Knipex Bolt Cutters offer a high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. Its forged-in stopper features a comfortable shock-absorber. They offer good access due to very flat construction of head and joint area. Ergonomically angled handles minimise effort. Fitted with sturdy, non-slip two-colour multi-component handle sleeves. There is also an eccentric bolt enabling precise adjustment (12 positions). Bolt cutter head is replaceable if needed. Specifications: Cutting Capacity Ø : @HRC 1913mm, @HRC 4010mm, @HRC 489mm. Overall Length: 910mm. Cutting Edge Length: 46mm. Head Thickness:42mm.
