The 45 Knipex Insulated Twin Wire Ferrules by DIN colour code. Supplied in a practical dispenser box with rotating lid, complete with opening to remove individual wire ferrules. Format: Ø 90mm, height 44mm. Contents: 20 Wire Ferrules 2 x 4mm², 10 Wire Ferrules 2 x 6mm², 10 Wire Ferrules 2 x 10mm², 5 Wire Ferrules 2 x 16mm².
200 Piece Knipex Insulated Twin Wire Ferrules by DIN colour code. Supplied in a practical dispenser box with rotating lid, complete with opening to remove individual wire ferrules. Format: Ø 90mm, height 44mm. Contents: 50 Wire Ferrules each for 2 x 0,75mm² / 2 x 1mm² / 2 x 1,5mm² / 2 x 2,5mm².
Knipex Crimping Pliers built for quick cutting and stripping of data cables in telecommunication and networks. The adjustable retaining bracket is suitable for all common RJ45 plugs with closed and non-closed housings. With a separate crimping die for strain relief (cable clip). Provides precise crimping process thanks to parallel crimping. There is also a ratchet mechanism (unlockable), ideal for repetitive crimping without sacrificing quality. Fitted with multi-component grips. Force is magnified by lever action to ensure fatigue-free working. Specifications: Capacity:RJ45 (8-poles). Overall Length: 190mm.
The Knipex Crimping Pliers made for cutting cables, stripping wire and crimping insulated terminals, heat shrinkable sleeve connectors and non-insulated crimp terminals according to DIN 46234. There are also threaded holes for cutting copper and brass screws threaded M2.6, M3, M3.5, M4 and M5. The handles are fitted with multi-component grips for increased comfort. A bolted joint provides higher stability and even movement. Specifications: Capacity: 0.5-6.0mm². Number of Crimp Profiles: 3. AWG:20-10. Overall Length: 240mm.
Knipex VDE StepCut XL Cable Shears have a large cutting capacity and provide noticeably easier cutting than compact cable shears. The cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC. With dual cutting areas: the stepped cutting edge holds small and larger cables close to the joint during the cut; the front cutting edge cuts very large cables step by step. They offer easy one or two-handed operation with minimum handle opening for large cable diameters. The adjustable, high-leverage bolted joint provides precise and smooth cutting. Fitted with VDE multi-component grip. VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A pinch guard prevents operators' fingers being pinched. NOT suitable for steel-reinforced cables, e.g. ACSR. Specifications: Cutting Capacity: Solid Copper or Aluminium Cables: 35mm², Stranded Cables: 70mm²and Fine Stranded Cables: 120mm². Overall Length: 225mm.
Knipex Anvil Shears made with opening spring and locking device. For cutting soft materials without damage, e.g. rubber profiles, PVC, leather, wood, hoses etc. Specifications: Blade Length: 40mm. Cutting Capacity: Round Material up to Ø 25mm. Flat Material max. width of 40mm and height of 7.5mm. Overall Length: 200mm.
The Knipex Tile Breaking Pliers built for the precise cutting (breaking) of tiles and porcelain stoneware after scoring with a tile cutter. They can easily be adjusted to the required tile thickness at the press of a button. Provides a great crushing force thanks to a10-fold increase of manual force. The positioning jaw is made from soft, stable plastic, this helps to prevent damage.
The Knipex Revolving Punch Pliers with six interchangeable punches. Use to punch holes into leather, textiles and plastic material. Powder-coated for reliable protection against rust. Fitted with an opening spring and locking device for ease of use. Specifications: Punch Ø: 2.0, 2.5, 3.0, 3.5, 4.0, 5.0mm. Overall Length: 220mm.
The Knipex TubiX S Pipe Cutter has been designed for pipe cutting in the tightest spaces. It has a very small cutting circle and a QuickLock one-hand locking mechanism for independent holding and clamping on the pipe. Fits in your pocket and cuts stainless steel. Cuts pipes with Ø 3 – 30mm (1/8 – 1 1/8in) with wall thicknesses up to 2mm. The cutting wheel made of high-grade ball-bearing steel. Both the cutting wheel and guide rollers feature high-quality needle bearings. Pipe diameter can be preset with the scale and clipped on to the pipe by spring-loaded cutting wheel. Its optimised turning knob with textured thumb recess provides 20 % higher torque and prevents slipping, even in wet conditions.The cutting wheel is easy to change,a spare wheel is stored in the turning knob.
The Knipex 90 25 25 Pipe Cutter cuts aluminium composite and plastic conduit pipes more easily than conventional shears with a fixed blade. Also suitable for composite pipes with increased aluminium layer thickness (e.g. Geberit Mepla). Wide plastic supports allow perfect right-angled cuts. Up to 60% less effort required when cutting. The freely rotating cutting wheel allows the pipe to be rotated with minimal friction when cutting.Optimum cutting results. The rotation allows the cutting wheel to penetrate the pipe effortlessly with minimal deformation. Fitted with ergonomic, multi-component handles for added comfort. There is also a locking mechanism for safe transport. Specifications: Cutting Capacity: Plastic and Composite Pipes: Ø 26mm.
The Knipex Cobra XS Water Pump Pliers made with one-handed fine adjustment (11 positions), just push for the simplest adjustment for different workpiece sizes. Self-locking on pipes and nuts, no slipping on the workpiece and low handforce required. A pinch guard prevents operators' fingers being pinched. The gripping surfaces feature special hardened teeth, hardness approx. 61 HRC, which are highly resistant to wear and provide stable gripping. Designed to offer optimum accessibility, even in confined spaces thanks to a compact design and very slim head. Specifications: Overall Length: 100mm. Capacity: Nuts: 24mm, Pipe: Ø 28mm.
Pack of 3 Knipex 86 09 300 V01 Protective Jaws. The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 300mm
Pack of 3 Knipex 86 09 250 V01 Protective Jaws. Suitable for all 86 XX 250 models (models from 2019). The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 250mm
Pack of 3 Knipex 86 09 180 V01 Protective Jaws. Suitable for all 86 XX 180 models (models from 2019). The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 180mm
The Knipex 85 51 180 A Spring Hose Clamp Pliers feature a quick-set adjustment adjusted by shifting directly onto the workpiece. Specifications: Length: 180mm. Capacity: 50mm. Adjustment Positions: 15. Weight: 170g. The Knipex 85 Series Spring Hose Clamp Pliers are made from Chrome vanadium, forged, oil-hardened electric steel. They are fitted with rotatable, universal grip inserts for reliably gripping the clamps in all positions. These clamps offer extremely good leverage which allows clamps to be opened easily without great effort. With its slim head design, narrow head width and rotatable grip inserts, it is an ideal tool, especially in confined areas. Can be used for standard, space-saving, spring wire hose clamps and for spring band clamps. 180mm
Knipex Cycle Pliers come with a 20° angled head for very narrow screw connections. Fitted with plastic coated handles for added comfort. Specifications: Overall Length: 200mm. Head Thickness 3.5mm. Recess Ø: 6/10mm.
The Knipex Straight Head Cycle Pliers for very narrow screw connections. Fitted with plastic coated handles for added comfort. Specifications: Overall Length: 200mm. Head Thickness 3.5mm. Recess Ø: 6/10mm.
This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 560mm. Clamping Capacity: Pipes 70mm (2.3/4in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 560mm
This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 420mm. Clamping Capacity: Pipes 60mm (2.3/8in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 420mm
This Knipex Pipe S-Type Pipe Wrench has the following specifications: Overall Length: 330mm. Clamping Capacity: Pipes 42mm (1.5/8in). The Knipex S-Type Pipe Wrenches offers time-saving, precise adjustment of the gripping width directly onto the workpiece at the push of a button. Less effort is required thanks to the self-locking action. Its gripping jaws feature specially hardened teeth, hardness approx. 56 HRC. Hardened handles allow for maximum load capability and a pinch guard prevents operators' fingers from being pinched. 330mm
The Knipex VDE Electronic Super Knips for ultra fine cutting work, e.g. in electronics and fine mechanics. They have ground, very sharp cutting edges without bevel. Cutting edge hardness approx. 54 HRC. The precisely shaped tips cut wires close to a surface from Ø 0.2mm. Controlled micro cutting edge misalignment provides the most precise cutting of even the thinnest of wires and for a long service life. Fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. A joint with stainless steel rivet allows for extremely smooth movement for minimum operator fatigue. They are also fitted with an opening spring and opening limiter. Specifications: Cutting Capacity: Medium Hard Wire:1.0mm. Overall Length: 125mm. Head Width: 13.5mm. Jaw Length: 9mm. Jaw Thickness (Joint): 7.5mm.
Knipex Diagonal Cutters come with an opening spring. For nearly flush cutting of moulded plastic components from sprues. Fitted with plastic coated handles for added comfort. Specification: Overall Length: 160mm.
These Knipex Bolt Cutters offer a high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. The robust cutting edges are additionally induction-hardened, cutting edge hardness approx. 62 HRC. Its forged-in stopper features a comfortable shock-absorber. They offer good access due to very flat construction of head and joint area. Ergonomically angled handles minimise effort. Fitted with sturdy, non-slip two-colour multi-component handle sleeves. There is also an eccentric bolt enabling precise adjustment (12 positions). Bolt cutter head is replaceable if needed. Specifications: Cutting Capacity Ø : @HRC 1913mm, @HRC 4010mm, @HRC 489mm. Overall Length: 910mm. Cutting Edge Length: 46mm. Head Thickness:42mm.
The Knipex Farriers' Pincers have a small head and anvil for redirecting horseshoe-nails. Also suitable for dismantling work in vehicle body workshops. The cutting edges are additionally hardened, approx. 59 HRC.
The Knipex Mechanics' Pliers with cross hatched gripping surfaces for a solid grip. The high strength pliers' tips are ideal for bending items. Fitted with 2 component, soft-grip handles for added comfort during use. Specifications: Overall Length: 200mm. Jaw Thickness (Joint): 9.5mm. Jaw Length: 73mm. Tips Width: 3.0mm. Tips Thickness: 2.5mm. Head Width: 17.5mm.
Knipex Stripping Knife with four blade positions: folded, straight, angled and ratcheting. The ratchet function provides easy cutting, even for a variety of cable sheaths. Cuts very hard or tough plastic sheaths up to 7mm (wall thickness). A guide shoe protects the conductor insulation under the cable sheath. Fitted with an ergonomically designed, comfortable handle. The sickle-shaped, replaceable hook blade can be folded for safe transport. There is also a three-stage blade lock for safe handling and transport. An integrated tether attachment point enables use with KNIPEX Tethered Tool System.
The Knipex WireStripper features multifunctional gripping surfaces for reliable gripping, holding and bending of flat and round material as well as for twisting wires. Innovative cutting edge geometry and powerful cutting edges allow for 50% higher cutting capacity and 25% less cutting effort compared to standard wire strippers. Hybrid tips, flat and wide, on the pliers head provide high stability and good accessibility. Clear-cut outside edges on the jaws make them ideal for working on flush-mounted junction boxes and deburring feed-through holes. They also feature stripping profiles for conductors from 18-10 AWG(solid) and 20-12 AWG (finely stranded) The comfortable opening width and ergonomic handle shape make handling comfortable. There is also an integrated opening spring which makes frequent cutting easier. Ideal for right- and left-handed users, locking device can be operated from either side. Specifications: Stripping Capacities: AWG 1 / 0, Copper Cable, Multiple-stranded Ø 15mm. Stripping Profiles: Conductors 18-10 AWG (solid) and 20-12 AWG (finely stranded). Cutting Capacity: Threaded Rods and Screws of UNC 6-32 and 8-32 up to class 4.6. Length: 200mm.
The Knipex VDE Needle-Nose Combination Pliers provide easy cutting thanks to the high leverage joint. Its gripping surfaces feature a special convex contour on one side for secure gripping of flat parts. The cutting edges are additionally induction-hardened, cutting edge hardness approx. 61 HRC. Milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled. Handy when working in confined areas thanks to slim head design and pointed jaws (anti-twist). Fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With a narrow head style for use in confined areas. Specifications: Length: 185mm. Cutting Capacity: Hard: 3.0mm, Medium Hard: 3.8mm, Multi-stranded Copper Cable 13mm.
The Knipex Modular X18 Tool Backpack fits you and your tools. Practical and comfortable due to fully hinged front and back, removable tool board and padding for your back.It has two separate inner compartments, ideal for tools, measuring instruments, a notebook or tablet. Innovative FIDLOCK connectors and MOLLE webbing provide optimal flexibility. It has one MOLLE strap on the inside and four MOLLE straps on the outside for attaching any adapters, carabiners and accessories.FIDLOCK connections can be fastened or unfastened in no time at all. The bag has atotal of 21 retaining loops and 37 pockets, some with zips. Made with durable fabric which is splash proof and easy to clean. The fabric is made of sustainable recycled synthetic fibres.The bag is fitted with a waterproof moulded bottom, made of impact-resistant plastic. It also provides a secure upright position when opened and closed.The luggage strap can be used to attach the bag to telescopic handles. Specifications: Dimensions (H x W x D): 53 x 34 x 21cm. Empty Weight: 2.9kg. Load Capacity: 15kg.
This Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contains: 1 x 87 01 150 KNIPEX Cobra High-Tech Water Pump Pliers. With push button for adjustment on the workpiece. It offers fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Its box-joint design allows for high stability due to double guide. With reliable catching of the hinge bolt: no unintentional shifting. A pinch guard prevents operators' fingers being pinched. Length: 150mm. Capacity: Pipe 36mm Ø, Nuts 32mm. 1 x 08 22 145 KNIPEX Needle-Nose Combination Pliers for all common installation and repair work. Handy size, ideal when working in confined areas thanks to slim head design and pointed jaws (anti-twist).Its grippingsurfaces feature a special convex contour on one side for secure gripping of flat parts. A milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled. They provide easy cutting thanks to the high leverage joint. Its cutting edges have been additionally induction-hardened, cutting edge hardness approx. 61 HRC. Length: 145mm. Cutting Capacity: Hard Wire 2.0mm, Medium Wire 2.0mm, Multi-Stand Copper 8.0mm.
The Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contains: 1 x 87 01 150 KNIPEX Cobra High-Tech Water Pump Pliers. With push button for adjustment on the workpiece. It offers fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Its box-joint design allows for high stability due to double guide. With reliable catching of the hinge bolt: no unintentional shifting. A pinch guard prevents operators' fingers being pinched. Length: 150mm. Capacity: Pipe 36mm Ø, Nuts 32mm. 1 x 74 01 160 KNIPEX High Leverage Diagonal Cutters for very tough, continuous use. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio.Its precision cutting edges are additionally induction-hardened (cutting edge hardness approx. 64 HRC), making them suitable for all sorts of wire including piano wire. Length: 160mm. Cutting Capacity: Hard Wire 3.4mm, Piano Wire: 2.0mm.
The Knipex 8 Piece Circlip Plier Set contains a selection of the most common Circlip Pliers for internal and external circlips. Made from special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. Supplied in sturdy, plastic retail packaging. Also suitable for storage of the pliers. Contains: 1 x 48 11 J1 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 11 J2 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 48 21 J11 Internal Circlip Pliers for Bore HolesØ 12-25mm. 1 x 48 21 J21 Internal Circlip Pliers for Bore HolesØ 19-60mm. 1 x 49 11 A1 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 11 A2 External Circlip Pliers for Shafts Ø 19-60mm. 1 x 49 21 A11 External Circlip Pliers for Shafts Ø 10-25mm. 1 x 49 21 A21 External Circlip Pliers for Shafts Ø 19-60mm.
