John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Connects a supply to a tap or other fixture or appliance
JG Speedfit x male flexi hose (braided) for the connection to a female thread appliance tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x male flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
Durable replacement seal for Speedfit fittings
JG Speedfit EPDM O-Ring (also known as a toric joint) is used to create a permanent leak-proof connection. Designed, manufactured and assembled in the UK.
Features and benefits
Replaces damaged or worn O-Rings in Speedfit Twist & Lock® fittings
Suitable for hot and cold water and central heating systems
Compatible with plastic or copper pipe
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow.John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications.
All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications.Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
Connects a supply to a tap or other fixture or appliance
JG Speedfit elbow pattern flexi hose (braided) that connects the water supply to a male thread appliance. On one end the hose features a push-fit connection for a supply pipe. On the other end there is a 90 degree bent nut which can be tightened on to a side entry tap, toilet or male thread. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit elbow pattern flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
Where to buy
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
Connects a supply to a tap or other fixture or appliance
JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
John Guest straight connector push-fit fitting connects two equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
This JG Underfloor Speedfit mixing valve unit is compatible with the brand's Speedfit underfloor hitting systems.
Product features
Compatible with Speedfit underfloor heating systems
Technical specifications
Brand JG Underfloor
Finish Galvanised
Length (M) 0,29
Length (mm) 290
Material Type Ductile Iron
Range speedfit
Range Name Speedfit
Range Type Wet System Underfloor Heating Valves
Weight 815.00000
Hazardous N
Body Material Ductile Iron
Dimensions (L x W x D) 290 x 220 mm
Material Ductile Iron
Supplier Product Code SPUFH1-H
Type Mixing Valve Unit
WEEE Compliant N
Width (mm) 220
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
