John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
John Guest push-fit acetal service valve metric is used to temporarily shut off hot or cold water supply to a drinks dispense fixture or fitting. The ball valve is easily operated with a _ turn screwdriver slot and is also suitable for hot and cold water applications.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. All John Guest fittings are manufactured and assembled in the UK. Durable acetal copolymer material with nitrile O-rings Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for hot and cold water Compatible with LLDPE or soft metal pipe/tubing
JG Speedfit cold water service reducing straight connector for the connection of two unequal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service reducing straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service reducing straight connector for the connection of two unequal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service reducing straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit 4 way push-fit manifold for splitting a main supply line into four reduced outlet feeds. Simply push the pipe fully onto the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit 4 way push-fit manifold is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
John Guest tube cutter is designed for accurately cutting LLDPE tubing up to 22mm. Simply mark where the pipe needs to be cut and then use the handy clamp action to cut a square edge, prefect for pipe insertion into a John Guest fitting. Suitable for sizes up to 22mm
John Guest tube cutter is designed for accurately cutting LLDPE tubing up to 22mm. Simply mark where the pipe needs to be cut and then use the handy clamp action to cut a square edge, prefect for pipe insertion into a John Guest fitting. Suitable for sizes up to 22mm
JG Speedfit 4 way push-fit manifold for splitting a main supply line into four reduced outlet feeds. Simply push the pipe fully onto the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit 4 way push-fit manifold is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (not suitable for central heating systems)
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 105 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (¡) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 105 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (¡) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal
