John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow.John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications.
All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications.Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Underfloor Floor Panel is an underfloor heating (UFH) pipe fixing system provides high heat output and response. Suitable for 15mm pipe, it uses a simple grid system to ensure precise layout to enable minimum pipe bending radius. Ideal for new builds and extensions with a screed floor construction, especially ground floor levels.
Fast and simple to install, it comes with a 11mm layer of insulation along with additional thermal insulation.
Screed pipe fixing system
Simple castellated grid system for precise pipe layout
Enables minimum pipe bending radius
11mm layer of insulation and additional thermal insulation
High heat output and response
Ideal for larger regular shaped rooms
Suitable for underfloor heating applications only
JG Speedfit collet locking clip prevents the accidental release of a pipe from a standard push-fit fitting. Red and blue options available to provide colour coding of hot and cold water pipes. Designed, manufactured and assembled in the UK.
Colour coded for easy identification of service type
For use with Speedfit fittings
Suitable for hot and cold water and central heating systems
JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation.
To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Push-fit service valve and hand-tighten tap connector
Integrated ¼ turn handle instantly isolates water
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Connects a supply to a tap or other fixture or appliance
JG Speedfit x plain stem flexi hose (white PVC) with a stem for the connection of plastic and copper pipe. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x plain stem flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
Fixes and secures underfloor heating pipework using a mounting rail
JG Underfloor mounting rail is designed for screed floor underfloor heating (UFH) applications when the insultation is too thin for staples. Suitable for new builds and extensions, especially ground floor levels, this pipe fixing method is fast and simple to install and offers high heat output and response.
15mm pipe can be easily secured to the clip rails on top of the rigid insulation sheets, which is then placed over the concrete subfloor. JG Underfloor Rail Pins should be used to fix the JG Underfloor mounting rail.
Features and benefits
Screed pipe fixing system
2-metre mounting rail
Easily clips pipe onto the rail
Ready-made pipe spacing
Pre-scored at 100m intervals for easy cutting
High heat output and response
Ideal for large regular shaped rooms
Suitable for underfloor heating applications an 15mm pipe only
SPECIFICATION
Brand JG Speedfit
Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply)
Model No JGUFHRAIL
Pack Size 1
Pieces in Pack/Case 1
Product Length 2 m
Product Type Clip Rail
JG LowFit Mounting Rail is designed for screed floor underfloor heating (UFH) applications when the insultation is too thin for staples. Suitable for new builds and extensions, especially ground floor levels, this pipe fixing method is fast and simple to install. It is also ideal for fixing pipework close to the manifold, creating a secure and symetrical finish once installed.
12mm pipe can be easily secured to the clip rails on top of the rigid insulation sheets, which is then placed over the concrete subfloor.
Screed pipe fixing system
1-meter mounting rail
Easily clips pipe onto the rail
Ready-made pipe spacing
Pre-scored at 150mm intervals for easy cutting
Suitable for underfloor heating applications and 12mm pipe only
JG Underfloor Pipe Staples are used to quickly and securely fix underfloor heating pipework to insulation. Suitable for screed floor applications, this method of pipe fixing is cost-effective and offers high heat output and response.
The pipe staples are barbed to ensure a secure grip and are easy to install when using a JG Underfloor Staple Gun.
Screed pipe fixing system
Barbed staples secure pipe to insulation
Ideal for regular and irregular shaped rooms
Conduit required when pipework runs through adjacent rooms
Suitable for underfloor heating applications only
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
John Guest push-fit acetal two way divider fitting splits supply to two equal supply feeds. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65oC max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65oC max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
