John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female coupler for connecting metric pipe using a female thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass female coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
