John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
Connects a supply to a tap or other fixture or appliance
JG Speedfit x plain stem flexi hose (white PVC) with a stem for the connection of plastic and copper pipe. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x plain stem flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 10
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 5
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Compatible with MDPE pipe Suitable for cold water use onlyPack of 10
JG Speedfit stop valve allows the user to stop the flow of water to a fixture or zone in the event of an emergency or for repair work. Simply push the valve fully onto the pipe. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Compact design is ideal for installing in areas where space is tight Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)Pack of 3
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 5
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 2
JG Speedfit emergency shut off tap allows the user to stop the flow of water to a fixture or zone in the event of an emergency or repair work. Simply push the valve fully onto the pipe and turn the knob on top of the push-fit fitting to allow or restrict the flow of water. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit emergency shut off tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Simple hand turn of the knob instantly isolates water
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
Fixes and secures underfloor heating pipework using a mounting rail
JG Underfloor mounting rail is designed for screed floor underfloor heating (UFH) applications when the insultation is too thin for staples. Suitable for new builds and extensions, especially ground floor levels, this pipe fixing method is fast and simple to install and offers high heat output and response.
15mm pipe can be easily secured to the clip rails on top of the rigid insulation sheets, which is then placed over the concrete subfloor. JG Underfloor Rail Pins should be used to fix the JG Underfloor mounting rail.
Features and benefits
Screed pipe fixing system
2-metre mounting rail
Easily clips pipe onto the rail
Ready-made pipe spacing
Pre-scored at 100m intervals for easy cutting
High heat output and response
Ideal for large regular shaped rooms
Suitable for underfloor heating applications an 15mm pipe only
SPECIFICATION
Brand JG Speedfit
Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply)
Model No JGUFHRAIL
Pack Size 1
Pieces in Pack/Case 1
Product Length 2 m
Product Type Clip Rail
John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
John Guest straight adaptor (BSP thread) push-fit fitting for the connection of metric pipe to a BSP type thread. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
John Guest straight adaptor (BSP thread) push-fit fitting for the connection of metric pipe to a BSP type thread. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
