John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
JG Speedfit cold water service equal Tee to connect three equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal Tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit conversion connector push-fit fitting that enables imperial and metric pipes to be connected by converting the pipe size from metric to imperial. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (not suitable for central heating systems)
JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use onlyPack of 5
Quickly and securely connects unequal pipe sizes to form a 90¡ pipe bend JG Speedfit reducing elbow push-fit fitting for the connection of unequal sized plastic or copper pipe to form a 90¡ bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use onlyPack of 2
JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use onlyPack of 2
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a _ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK. Durable acetal stop valve with nitrile O-Ring Integral single service check valve for backflow prevention Integral _ turn chrome plated ball valve for quick and simple isolation Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 10
JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use onlyPack of 5
JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use onlyPack of 2
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a _ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK. Durable acetal stop valve with nitrile O-Ring Integral single service check valve for backflow prevention Integral _ turn chrome plated ball valve for quick and simple isolation Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 5
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a _ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK. Durable acetal stop valve with nitrile O-Ring Integral single service check valve for backflow prevention Integral _ turn chrome plated ball valve for quick and simple isolation Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 2
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 5
