Connects a supply to a tap or other fixture or appliance JG Speedfit x union nut flexi hose with service valve (white PVC) for the connection to a male thread appliance, such as a tap. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Ideal for bathroom basin and bath taps, the valve enables water to be isolated in the event of an emergency or for maintenance work using an easy to operate integrated handle. Simply push the JG Speedfit x union nut flexi hose with service valve (white PVC) fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits An alternative to hard piping to a tap or fixture Integral service valve for isolation with an easy to operate handle Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

Connects a supply to a tap or other fixture or appliance JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits An alternative to hard piping to a tap or fixture Integral service valve for isolation with an easy to operate handle Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

Connects a supply to a tap or other fixture or appliance JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits An alternative to hard piping to a tap or fixture Integral service valve for isolation with an easy to operate handle Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

Connects a supply to a tap or other fixture or appliance JG Speedfit x male flexi hose (braided) for the connection to a female thread appliance tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x male flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

Connects a supply to a tap or other fixture or appliance JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

Plugs a connection port on a Speedfit fitting The JG Speedfit plug is for plugging unused ports on a Speedfit push-fit fitting. Designed, manufactured and assembled in the UK.

Read more less