John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
JG Speedfit cold water service equal straight connector for the connection of two equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up.
The JG Speedfit cold water service equal straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Stainless steel teeth grab ring provides extra grip on the pipe
Durable material with high impact resistance
Non-toxic and no scale build-up
Resists corrosion and biological growth
Compatible with MDPE pipes only (inserts required)
Suitable for cold water use only
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
JG Speedfit cold water service plug for plugging unused ports on a Speedfit MDPE push-fit fitting. Designed, manufactured and assembled in the UK.
Compatible with MDPE pipes only
Suitable for cold water use only
JG Underfloor 5 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 5 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications onl
Speedfit conduit pipe is a tube used to protect and route plumbing pipes installed in concrete or masonry in a building or structure.
Durable corrugated design Colour coded for easy identification of service type
JG Lowfit cold forming bend helps create a tighter and more rigid pipe bend than the minimum allowed when the pipe is unsupported.
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Suitable for underfloor heating applications only
JG LowFit Edge Strip is used around the edge of a solid (screed) floor to provide an expansion gap as the floor heats up and cools down. It also has insulating properties ensuring heat loss is kept to a minimum.
Foam edge strip for screed floors
Acts as an expansion gap when the floor heats up and cools down
JG LowFit conduit elbow allows for transition from JG Speedfit pipe from the UFH manifold pipework to conduit piping run within the floor. It can be fixed or free standing.
90ºC angle
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and JG Speedfit Conduit Pipe
Suitable for underfloor heating applications only
The JG Underfloor Manifold Connection Kit is designed for connecting multiple JG LowFit or JG Underfloor Manifolds together. It is an ideal solution for larger properties that require multiple loops per room, or when additional underfloor heating (UFH) circuits are required on an existing installation.
The kit is easy to installl and comes complete with sealing washers. Simply remove the blanking plugs from the existing manifold at the end of both flow and return bars. Insert the sealing washer into the connectors and tighten. The additonal manifold can then be connected to the other end, creating further circuits, whilst still using a single JG Underfloor Thermomix Control Kit.
The manifold flow meters will need to be recalibrated after installation on both manifolds to ensure optimum performance.
Connects two JG Underfloor or JG LowFit manifolds
Quick & easy to fit with union connections
Kit contains both adaptors for flow and return bars and sealing washers
JG Aura Wireless Thermostat 230v is an energy saving solution for controlling underfloor heating (UFH) systems, individual radiators and boiler switching. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The mains-wired thermostat removes the hassle of replacing batteries and enhances the wireless signal as each unit acts as a repeater. It also offers individual and multi-room control and heating can be regulated from anywhere and at any time using the free JG Aura app.
When internet enabled, controls require no maintenance as they automatically update.
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
230v mains wired, wireless network
Slimline design with touch sensitive controls
Free Smart App control option
