The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 2

Read more less

The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate ¼ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)

Read more less

JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation. To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector Integrated ¼ turn handle instantly isolates water Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)

Read more less

The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 10

Read more less

The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 5

Read more less

JG Speedfit stop valve allows the user to stop the flow of water to a fixture or zone in the event of an emergency or for repair work. Simply push the valve fully onto the pipe. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Compact design is ideal for installing in areas where space is tight Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)Pack of 3

Read more less

JG Speedfit emergency shut off tap allows the user to stop the flow of water to a fixture or zone in the event of an emergency or repair work. Simply push the valve fully onto the pipe and turn the knob on top of the push-fit fitting to allow or restrict the flow of water. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit emergency shut off tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Simple hand turn of the knob instantly isolates water Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)

Read more less

JG Speedfit cold water service stop tap MDPE x MDPE instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x MDPE fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only

Read more less

Reliance Valves Nickel Plated Lever Ball Valves are used in water applications to allow appliances or sections of plumbing within a building to be switched off, without the need for draining the whole system. The brass ball valve reduces and stops water flow, creating an isolation after the valve position. Reliance quarter turn ball valve fittings are available with a blue or red handle to help distinguish usage (generally hot and cold) and are EN331 compliant.Typically, brass ball valves can be found at appliance outlets, such as washing machines and dishwashers to allow water supply to be cut off for installation and maintenance. We also offer in line washing machine valves with smaller handles which can be used in limited space areas.Reliance Valves Nickel Plated Lever Ball Valves can also be used under kitchen or bathroom sinks to allow users to control tap water flow. Used in place of a standard service or isolation valve, a quarter turn valve can provide a more robust, easy to use shut off option for temporarily stopping water supply. Due to the large handle, these valves are also recommended for use in specialist situations where the smaller screw type ball valves may not be suitable.The quarter turn ball valve is also available with Speedfit connections, for fast, secure and tool-free installation.Features and benefits Range of full bore ball valves Nickel plated PN40 or PN25 FBSP variants available Easy to use lever handle with clear colouring to designate usage: red and blue for hot and cold water in accordance with EN331 Not suitable for chilled water

Read more less

The John guest 3/8Ó OD x 3/8Ó NPT push-to-connect to male valve is manufactured from white polypropylene and equipped with epdm o-rings utilizing John guestÕs push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.About this item  John guest push-to-connect technology provides a simple, reliable, leak-free connection  Manufactured from white polypropylene and equipped with EPDM o-rings  Can be used with plastic or soft Copper tubing  Manufactured with FDA compliant materials and NSF 61 and 51 certified  Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics Pack of 5

Read more less

John Guest push-fit acetal service valve metric is used to temporarily shut off hot or cold water supply to a drinks dispense fixture or fitting. The ball valve is easily operated with a _ turn screwdriver slot and is also suitable for hot and cold water applications.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. All John Guest fittings are manufactured and assembled in the UK. Durable acetal copolymer material with nitrile O-rings Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for hot and cold water Compatible with LLDPE or soft metal pipe/tubing

Read more less