Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
JG Speedfit cold water service imperial converter push-fit fitting is used to a convert metric size MDPE fitting for use with imperial size LDPE to BS1972 Class C or Class D. Supplied with inch size pipe insert. The stem cannot be disconnected from mating connector with a collet cover fitted. Designed, manufactured and assembled in the UK.
Instant push-fit connection and screw down mains stop valve
Install and demount in seconds without tools
Stainless steel teeth grab ring provides extra grip on the pipe
Durable material with high impact resistance
Non-toxic and no scale build-up
Resists corrosion and biological growth
Compatible with MDPE pipes only (inserts provided)
Suitable for cold water use only
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Features and benefits
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
The John Guest Speedfit UFH Manifold Flow Meter in White is designed for efficient underfloor heating systems. This high-quality flow meter ensures accurate flow measurement and is easy to install, making it a perfect addition to your heating setup.
High-Quality Construction: Made from durable materials for long-lasting performance.
Easy Installation: Designed for quick and hassle-free setup.
Accurate Flow Measurement: Ensures optimal performance of your underfloor heating system.
Compatible with John Guest Speedfit Systems: Seamlessly integrates with existing setups.
Stylish Design: The white finish complements modern heating systems.
Wired programmable room thermostat for underfloor heating
JG Underfloor Controls 240v wired programmable thermostat is a stylish and simple way to control wet underfloor heating systems.
Easily mounted on the wall, the thermostat signals the JG Underfloor Controls wiring centre to provide heat to an individual room. Its user-friendly interface makes adjusting and programming temperatures fast and simple.
Ideal for new builds and renovations, the back plate is fitted before decorating begins and the front plate is installed once work is completed to avoid any damage. Designed to suit a standard pattress box, the thermostat is also ideal when replacing an existing thermostat.
The thermostat can be accessed remotely using the JG Underfloor Controls gateway and App, offering remote underfloor heating control on the go.
Features and benefits
Mains-wired thermostat that is easy to install and set up
7-day programme, 15-minute increments and 6 on/off periods for optimal comfort and control
Ambient temperature sensor with an optional connection for an external probe to protect against excessive heat
Open Window function detects sudden temperature drops to prevent the boiler from firing up and wasting energy
Adaptive function predicts heat up times and adjusts programming to eliminate temperature spikes
Freeze Protection function reduces energy-wastage in unused rooms and is adjustable between 5-17°C
Holiday function maintains low-level heating when the home is unoccupied
Heating Boost function boosts heat for 1-9 hours in the event of low temperatures
Anti-seize function prevents the UFH pump from seizing during low-usage months
Free smart app for controlling underfloor heating on the go
Compatible with Alexa or Google Home voice control
Meets Boiler Plus requirements
Wired programmable room thermostat for underfloor heating
JG Underfloor Controls 240v wired programmable thermostat is a stylish and simple way to control wet underfloor heating systems.
Easily mounted on the wall, the thermostat signals the JG Underfloor Controls wiring centre to provide heat to an individual room. Its user-friendly interface makes adjusting and programming temperatures fast and simple.
Ideal for new builds and renovations, the back plate is fitted before decorating begins and the front plate is installed once work is completed to avoid any damage. Designed to suit a standard pattress box, the thermostat is also ideal when replacing an existing thermostat.
The thermostat can be accessed remotely using the JG Underfloor Controls gateway and App, offering remote underfloor heating control on the go.
Features and benefits
Mains-wired thermostat that is easy to install and set up
7-day programme, 15-minute increments and 6 on/off periods for optimal comfort and control
Ambient temperature sensor with an optional connection for an external probe to protect against excessive heat
Open Window function detects sudden temperature drops to prevent the boiler from firing up and wasting energy
Adaptive function predicts heat up times and adjusts programming to eliminate temperature spikes
Freeze Protection function reduces energy-wastage in unused rooms and is adjustable between 5-17°C
Holiday function maintains low-level heating when the home is unoccupied
Heating Boost function boosts heat for 1-9 hours in the event of low temperatures
Anti-seize function prevents the UFH pump from seizing during low-usage months
Free smart app for controlling underfloor heating on the go
Compatible with Alexa or Google Home voice control
Meets Boiler Plus requirements
Wireless RF programmable room thermostat for underfloor heating
JG Underfloor Controls 240v wired and RF programmable thermostat is a stylish and simple way to control wet underfloor heating systems.
The thermostat is mains-powered but communicates with the JG Underfloor Controls RF wiring centre via a radio signal to provide heat to an individual room and to remove the need for further wiring. Its user-friendly interface makes adjusting and programming temperatures fast and simple.
Ideal for new builds and renovations, the back plate is fitted before decorating begins and the front plate is installed once work is completed to avoid any damage. Designed to suit a standard pattress box, the thermostat is also ideal when replacing an existing thermostat.
When used with the JG Underfloor Controls gateway and app, underfloor heating can be remotely controlled on the go.
Features and benefits
Mains-powered RF programmable thermostat that is easy to install and set up
7-day programme, 15-minute increments and 6 on/off periods for optimal comfort and control
Ambient temperature sensor with an optional connection for an external probe to protect against excessive heat
Radio signalling to the RF wiring centre saves cost on cabling and eliminates damage and disruption caused by additional wiring
Open Window function detects sudden temperature drops to prevent the boiler from firing up and wasting energy
Adaptive function predicts heat up times and adjusts programming to eliminate temperature spikes
Freeze Protection function reduces energy-wastage in unused rooms and is adjustable between 5-17°C
Holiday function maintains low-level heating when the home is unoccupied
Heating Boost function boosts heat for 1-9 hours in the event of low temperatures
Anti-seize function prevents the UFH pump from seizing during low-usage months
Free smart app for controlling underfloor heating on the go
Compatible with Alexa or Google Home voice control
Meets Boiler Plus requirements
Wireless RF programmable room thermostat for underfloor heating
JG Underfloor Controls 240v wired and RF programmable thermostat is a stylish and simple way to control wet underfloor heating systems.
The thermostat is mains-powered but communicates with the JG Underfloor Controls RF wiring centre via a radio signal to provide heat to an individual room and to remove the need for further wiring. Its user-friendly interface makes adjusting and programming temperatures fast and simple.
Ideal for new builds and renovations, the back plate is fitted before decorating begins and the front plate is installed once work is completed to avoid any damage. Designed to suit a standard pattress box, the thermostat is also ideal when replacing an existing thermostat.
When used with the JG Underfloor Controls gateway and app, underfloor heating can be remotely controlled on the go.
Features and benefits
Mains-powered RF programmable thermostat that is easy to install and set up
7-day programme, 15-minute increments and 6 on/off periods for optimal comfort and control
Ambient temperature sensor with an optional connection for an external probe to protect against excessive heat
Radio signalling to the RF wiring centre saves cost on cabling and eliminates damage and disruption caused by additional wiring
Open Window function detects sudden temperature drops to prevent the boiler from firing up and wasting energy
Adaptive function predicts heat up times and adjusts programming to eliminate temperature spikes
Freeze Protection function reduces energy-wastage in unused rooms and is adjustable between 5-17°C
Holiday function maintains low-level heating when the home is unoccupied
Heating Boost function boosts heat for 1-9 hours in the event of low temperatures
Anti-seize function prevents the UFH pump from seizing during low-usage months
Free smart app for controlling underfloor heating on the go
Compatible with Alexa or Google Home voice control
Meets Boiler Plus requirements
Centralised junction for all underfloor heating wiring
JG Underfloor Controls heating 240v wiring centre is an all-in-one junction box for underfloor heating systems.
Essential for centralising underfloor heating wiring, the wiring centre features 8 zone connections and is easily mounted and wired with a fully labelled circuit board.
All connections are hard wired for zone valves (for additional radiators or hot water motorized valves), actuators, pump and room thermostats.
When used with the JG Underfloor Controls gateway and app, underfloor heating and hot water can be remotely controlled on the go.
Features and benefits
Controls up to 4 circuits from a single thermostat
LED lights indicate the status of the system power, thermostats, pump, boiler and hot water, so performance can be monitored at a glance
Dip switches on all 8 standard zones stop the UFH pump activating when a mix of both radiators and underfloor heating is used on the system
All functions fully accessible from the front of the unit with no additional internal link wiring required
Connections for hot water and central heating zone valves
Centralised junction for all underfloor heating wiring. Communicates via radio frequency to associated thermostats, eliminating the need for additional wiring
JG Underfloor Controls 240v wiring centre with RF is an all-in-one junction box for underfloor heating systems.
Essential for centralising underfloor heating wiring, the wiring centre features 8 zone connections and is easily mounted and wired with a fully labelled circuit board.
All connections are hard wired for zone valves (for additional radiators or hot water motorized valves), actuators, pump and a remote connection to JG Underfloor Controls RF programmable room thermostats.
When used with the JG Underfloor Controls gateway and app, underfloor heating and hot water can be remotely controlled on the go.
Features and benefits
Controls up to 4 circuits from a single thermostat
On board RF communication between the thermostats and the wiring centre eliminates the need for further wiring
LED lights indicate the status of the system power, thermostats, pump, boiler and hot water, so performance can be monitored at a glance
Dip switches on all 8 standard zones stop the UFH pump activating when a mix of both radiators and underfloor heating is used on the system
All functions fully accessible from the front of the unit with no additional internal link wiring required
Connections for hot water and central heating zone valves
Battery operated programmable room thermostat for underfloor heating
JG Underfloor Controls battery operated and RF programmable thermostat is a stylish and simple way to control wet underfloor heating systems.
The thermostat communicates with the JG Underfloor Controls RF wiring centre via a radio signal to provide heat to an individual room and to remove the need for further wiring. Its user-friendly interface makes adjusting and programming temperatures fast and simple.
When used with the JG Underfloor Controls gateway and app, underfloor heating can be controlled remotely on the go.
Features and benefits
Battery operated programmable thermostat that is easy to install and set up
7-day programme, 15-minute increments and 6 on/off periods for optimal comfort and control
Ambient temperature sensor with an optional connection for an external probe to protect against excessive heat
Radio signalling to the RF wiring centre saves cost on cabling and eliminates damage and disruption caused by additional wiring
Open Window function detects sudden temperature drops to prevent the boiler from firing up and wasting energy
Adaptive function predicts heat up times and adjusts programming to eliminate temperature spikes
Freeze Protection function reduces energy-wastage in unused rooms and is adjustable between 5-17°C
Holiday function maintains low-level heating when the home is unoccupied
Heating Boost function boosts heat for 1-9 hours in the event of low temperatures
Anti-seize function prevents the UFH pump from seizing during low-usage months
Free smart app for controlling underfloor heating on the go
Compatible with Alexa or Google Home voice control
Meets Boiler Plus requirements
Battery operated programmable room thermostat for underfloor heating
JG Underfloor Controls battery operated and RF programmable thermostat is a stylish and simple way to control wet underfloor heating systems.
The thermostat communicates with the JG Underfloor Controls RF wiring centre via a radio signal to provide heat to an individual room and to remove the need for further wiring. Its user-friendly interface makes adjusting and programming temperatures fast and simple.
When used with the JG Underfloor Controls gateway and app, underfloor heating can be controlled remotely on the go.
Features and benefits
Battery operated programmable thermostat that is easy to install and set up
7-day programme, 15-minute increments and 6 on/off periods for optimal comfort and control
Ambient temperature sensor with an optional connection for an external probe to protect against excessive heat
Radio signalling to the RF wiring centre saves cost on cabling and eliminates damage and disruption caused by additional wiring
Open Window function detects sudden temperature drops to prevent the boiler from firing up and wasting energy
Adaptive function predicts heat up times and adjusts programming to eliminate temperature spikes
Freeze Protection function reduces energy-wastage in unused rooms and is adjustable between 5-17°C
Holiday function maintains low-level heating when the home is unoccupied
Heating Boost function boosts heat for 1-9 hours in the event of low temperatures
Anti-seize function prevents the UFH pump from seizing during low-usage months
Free smart app for controlling underfloor heating on the go
Compatible with Alexa or Google Home voice control
Meets Boiler Plus requirements
Internet gateway for remote underfloor heating control (RF thermostats only)
JG Underfloor Controls gateway is a mains-powered, compact unit for connecting RF thermostats to the internet via Wi-Fi.
When used with the JG Underfloor Controls app, underfloor heating can be remotely controlled on the go.
Features and benefits
Enables control of thermostats via the internet
Compact mains-powered unit, cable supplied
Indicator lights show status of device
Install anywhere in the system, no hard-wired router connection needed
Wired programmable hot water timer for pre-heating hot water and avoiding temperature drops
JG Underfloor Controls 240v wired hot water timer is a stylish and simple way to control and set hot water programmes.
Easily mounted, the timer communicates with the hot water valve wired directly to the JG Underfloor Controls heating wiring centre, providing hot water control on demand.
Ideal for new builds and renovations, the back plate is fitted before decorating begins and the front plate is installed once work is completed to avoid any damage. Designed to suit a standard pattress box, the timer is also ideal when replacing an existing hot water timer.
When used with the JG Underfloor Controls gateway and app, hot water can be remotely controlled on the go.
Features and benefits
Mains-wired hot water timer that is easy to install and set up
7-day programme, 15-minute increments and 4 on/off periods for optimal comfort and control
Key lock function protects against vandalism and unwanted programme changes
Hot Water Boost function boosts heat for 1-9 hours in the event of low temperatures
Free smart app for controlling hot water on the go
Compatible with Alexa or Google Home voice control
JG Underfloor floor clips screw easily into the insulation to secure 15mm pipe, they are best installed using a JG Underfloor fixing tool.
Secure pipe fixing floor clips
Screw down 15mm pipe clips
JG Underfloor conduit elbow allows for transition from JG Speedfit pipe from the UFH manifold pipework to conduit piping run within the floor. It can be fixed or free standing.
90ºC angle
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and JG Speedfit Conduit Pipe
Suitable for underfloor heating applications only
Single room underfloor heating pack for areas up to 30m2
Single zone control pack suitable for up to 30m2
Ready to plug in, pre-assembled control unit and Grundfos UPM3 circulating pump
2 coils of JG Layflat pipe (15mm x 150m)
JG Aura 230v Thermostat (programmable)
300 x pipe clips and 8 x pipe inserts (15mm)
2 JG Speedfit Equal Tees and 2 Stem Elbows (15mm)
High heat output and response
Anti-vibration mounting bracket for silent operation
Suitable for solid concrete or beam and block subfloors
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
JG Speedfit angle service valve with tap connector for connecting fixtures to pipework. The valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work using a tamperproof ¼ turn screwdriver slot. Simply push the valve fully onto the pipe and use the 90o bent nut to hand-tighten on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit angle service valve with tap connector is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Push-fit service valve and hand-tighten tap connector
1/4 turn isolation screwdriver slot
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation.
To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Push-fit service valve and hand-tighten tap connector
Integrated ¼ turn handle instantly isolates water
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
JG Speedfit x union nut flexi hose with service valve (white PVC) for the connection to a male thread appliance, such as a tap. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Ideal for bathroom basin and bath taps, the valve enables water to be isolated in the event of an emergency or for maintenance work using an easy to operate integrated handle.
Simply push the JG Speedfit x union nut flexi hose with service valve (white PVC) fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (white PVC) for the connection of plastic or copper pipe. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (white PVC) for the connection of plastic or copper pipe. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit monobloc mixer flexi hose (white PVC) that connects plastic or copper pipe onto a monobloc mixer. The white PVC hose material significantly reduces hose ÔkinkingÕ and makes the product easier to clean. On one end the hose features a push-fit connection for a supply pipe. On the other end there is a monobloc connection which can be installed on to a monobloc tap. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit monobloc mixer flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 ¡C)Pack of 10
JG Speedfit monobloc mixer flexi hose (white PVC) that connects plastic or copper pipe onto a monobloc mixer. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a monobloc connection which can be installed on to a monobloc tap. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit monobloc mixer flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit monobloc mixer flexi hose (white PVC) that connects plastic or copper pipe onto a monobloc mixer. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a monobloc connection which can be installed on to a monobloc tap. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit monobloc mixer flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit wing back plate elbow push-fit fitting for the quick and secure installation of bib style taps. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit wing back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with MDPE pipes (inserts required)
Suitable for cold water use only
