Need to securely connect three pipes of the same size? If you’re using the JG Speedfit push-fit system, you’ll need these equal tee connectors – they can be used with plastic or copper pipes, and it's a far faster way of connecting than using traditional methods.
Installation is simple – you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it.
• Install or demount in seconds, without the need for tools
• Suitable for hot and cold water services
• Can be used on central heating systems and combi systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0215W
Warranty (years) 50
Diameter (mm) 15
Pack Size 2
Fitting Type Tee
Equal or Reducing Equal
Need to securely connect three pipes of the same size? If you’re using the JG Speedfit push-fit system, you’ll need this equal tee connector – it can be used with plastic or copper pipes, and is a far faster way of connecting than using traditional methods.
Installation is simple – you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it.
• Install or demount in seconds, without the need for tools
• Suitable for hot and cold water services
• Can be used on central heating systems and combi systems
• Minimum operating temperature of 20°C
• Maximum operating temperature of 105°C
• 12 bar maximum operating pressure at minimum temperature
• 3 bar maximum operating pressure at maximum temperature
• 50-year manufacturer’s guarantee (T&Cs apply)
• Manufactured to BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0222W
Warranty (years) 50
Diameter (mm) 22
Pack Size 1
Fitting Type Tee
Equal or Reducing Equal
Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
Quickly and securely connects three pipes of equal size
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Need to securely connect three pipes of the same size? If youÕre using the JG Speedfit push-fit system, youÕll need this equal tee connector Ð it can be used with plastic or copper pipes, and is a far faster way of connecting than using traditional methods. Installation is simple Ð you just push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. No tools are needed, which makes it far easier to manoeuvre in tight spaces or to readjust joins. Tool-free dismounting is equally straightforward, by unlocking the nut and pushing the collet towards the body of the fitting. Then, you just need to pull the pipe to release it. ¥ Install or demount in seconds, without the need for tools ¥ Suitable for hot and cold water services ¥ Can be used on central heating systems and combi systems¥ Minimum operating temperature of 20¡C ¥ Maximum operating temperature of 105¡C ¥ 12 bar maximum operating pressure at minimum temperature ¥ 3 bar maximum operating pressure at maximum temperature ¥ 50-year manufacturerÕs guarantee (T&Cs apply) ¥ Manufactured to BS EN 7291 Parts 1, 2, 3 and S ¥ WRAS-approved ¥ Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0222W Warranty (years)50 Diameter (mm) 22 Pack Size 2Fitting Type Tee Equal or Reducing Equal
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
Pack of 3
John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
Pack of 5
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 20
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 30
JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Pack of 3
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Pack of 4
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 2The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 3The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 4The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 5The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications.All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics.
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 10
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 2
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 5
Connects a supply to a tap or other fixture or appliance
JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
