10 x 1m cable accessory kit which is ideal for gaining access to wire and cable under floorboards, in ceiling ducts and in wall cavities.Contents:10 x 1m reinforced polyester rods.Flexy extender.Ring end for pushing.Hook end for pulling.
The BlueSpot Adjustable Wrench is manufactured from drop forged, heat treated carbon steel for strength and durability. The wrench is chrome plated to protect against corrosion and for a high shine finish. An extra-long handle helps tackle especially tough jobs where more torque is required. The jaw design allows a better fit and the knurled wheel makes adjustments easy.This BlueSpot Adjustable Wrench has the following specification: Max. Jaw Capacity: 52mmLength: 450mm (18in)
The BlueSpot Adjustable Wrench is manufactured from drop forged, heat treated carbon steel for strength and durability. The wrench is chrome plated to protect against corrosion and for a high shine finish. An extra-long handle helps tackle especially tough jobs where more torque is required. The jaw design allows a better fit and the knurled wheel makes adjustments easy.This BlueSpot Adjustable Wrench has the following specification: Max. Jaw Capacity: 62mmLength: 590mm (24in)
The BlueSpot Torque Angle Gauge is ideal for the tightening of fasteners once the torque load has been applied. The dial has been calibrated in increments of 2° and has an easy read face for increased precision. To set angle gauge simply insert the holding key into the housing and turn driver to required angle. Suitable for use with 1/2in drive ratchets and power bars.
The BlueSpot Tools Combination Pliers are manufactured from drop-forged micro plated steel for increased durability. They have soft grip, vinyl handles that incorporate a slip guard for increased comfort.
The BlueSpot Tools Long Nose Pliers are manufactured from drop-forged micro plated steel for increased durability. They have soft grip, vinyl handles that incorporate a slip guard for increased comfort.
BlueSpot Tools Side Cutter Pliers are manufactured from drop-forged micro plated steel for increased durability. They have soft grip, vinyl handles that incorporate a slip guard for increased comfort.
The BlueSpot Circlip Pliers Set contains 4 separate pliers for the fitting and removal of circlips. The pliers are made from heat treated chrome vanadium steel and fitted with a vinyl dipped handle for comfort and improved grip. The set comes in a handy wallet for easy storage and transport. Set includes: 1 x Internal Straight Tip Circlip Pliers 150mm (6in)1 x External Straight Tip Circlip Pliers 150mm (6in)1 x Internal Circlip Pliers 90 Tip 150mm (6in)1 x External Circlip Pliers 90 Tip 150mm (6in)
The BlueSpot External Straight Tip Circlip Pliers are manufactured from chrome vanadium steel. The tips are chemically blackened to avoid corrosion. The handles are fitted with a non-slip, cushioned vinyl coating for comfort and grip.
The BlueSpot Internal Circlip Pliers are manufactured from chrome vanadium steel. The tips are chemically blackened to avoid corrosion. The handles are fitted with a non-slip, cushioned vinyl coating for comfort and grip. The 90° angled tip allows for increased visibility and precision in hard to reach areas.
The BlueSpot External Circlip Pliers are manufactured from chrome vanadium steel. The tips are chemically blackened to avoid corrosion. The handles are fitted with a non-slip, cushioned vinyl coating for comfort and grip. The 90° angled tip allows for increased visibility and precision in hard to reach areas.
Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles. A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before. 51 code represents DRY cutting blade.23 code represents WET cutting blade.The Bahco 10-21-51 Bowsaw is supplied with a peg tooth blade, for dry cutting. Specification Size: 530mm (21in).Weight: 680g.
Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles. A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before. 51 code represents DRY cutting blade.23 code represents WET cutting blade.The Bahco 10-24-23 Bowsaw is supplied with a raker tooth blade, for wet cutting. Specification Size: 600m (24in).Weight: 680g.
Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles. A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before. 51 code represents DRY cutting blade.23 code represents WET cutting blade.The Bahco 10-24-51 Bowsaw is supplied with a peg tooth blade, for dry cutting. Specification Size: 600mm (24in).Weight: 743g.
Bacho 10-21 Bowsaw is a lightweight yet heavy-duty bowsaw for all round use. The integrated, ergonomic handle, with its built in hand guard, protects user's knuckles. A unique mechanism in the handle makes blade changing and tensioning adjustments effortless. The sturdy blade fittings and high blade tension make precision cutting easier than ever before. 51 code represents DRY cutting blade.23 code represents WET cutting blade.The Bahco 10-30-23 Bowsaw is supplied with a raker tooth blade, for wet cutting. Specification Size: 755mm (30in).Weight: 865g.
The spanners in this 11 piece Bahco Combination Spanner Set are made from Vanadium extra with a matt finish. They have an open-end angle 15°, Ring end 15° offset and equal openings at both ends. Conforms to DIN 3113/ISO 3318/ISO 7738 standards. Sizes; 8, 9, 10, 11, 12, 13, 14, 15, 17, 19 & 22mm. The spanners are supplied in a black plastic pouch.
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 250mm (10in)Tanged
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)Tanged
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 250mm (10in)Tanged
The Bahco ERGO™ Pipe Wrench is a multi-purpose pipe wrench, black oxidised and anti-rust treated high-alloyed, hardened special steel with precision induction hardened jaws. Outer handle of hardened sheet metal with ergonomically designed soft, warm-to-the touch, high friction handle with a strong, stable core. Thermoplastic surface on tough polypropylene gives a superior grip. Optimised design with narrower jaws gives perfect accessibility, even in cramped corners. Patented progressive teeth angled aggressively inwards, fine at the inner part of the jaws and larger at the other part gives a better grip on all sizes of pipes.The inner handle with built-in protection against pinching and a safety stop for the adjusting nut. Conforms to DIN 5234 standards.Max jaw capacity: 45mm Pipes up to: 1in Length: 325mm (13in)
For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing. Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)Tanged
The Bahco BAHCOFIT Hex Ball End screwdrivers are suitable for hexagonal head screws. They are ball ended to allow easy insertion in to the screw head from a range of angles. This is more efficient and time saving compared to a standard hex tip. The screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification.Specifications: Tip size: 3.0mm.Blade length: 100mm.Total length: 195mm.
The Bahco BAHCOFIT Hex Ball End screwdrivers are suitable for hexagonal head screws. They are ball ended to allow easy insertion in to the screw head from a range of angles. This is more efficient and time saving compared to a standard hex tip. The screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification.Specifications: Tip size: 6.0mm.Blade length: 125mm.Total length: 242mm.
The Bahco BAHCOFIT Robertson Tip screwdrivers are suitable for Robertson (square) screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification.Specifications: Tip size: #2.Blade length: 125mm.Total length: 230mm.
Bahco Homeowner's Wood File 4-152 with an ERGO™ handle for comfort and grip, suitable for homeowners. One side a double second cut for fine filing of metals, iron and plastics, etc and the other a bastard rasp for rough filing of wood, plywood, soft plastics, etc. Size: 8in.
Bahco Homeowners File Set with ERGO™ handles for comfort and grip, they are suitable for homeowners. Both files are 8in in length. Contains the following: 1 x Bastard rasp, 1 side - double second cut, for wood.1 x Bastard double cut, 1 side - single second cut, for metal.
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Ideal for filing grooves, rectangular holes, internal corners and fine adjustment of cutting tools. 6 inch square handled second cut file.
Handled square files with double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. The bi-material handle gives comfort and control during use. It also incorporates a handy hanging slot.Slightly tapered towards tip for surface filing.Second Cut: Approx 36 teeth per 25mm (Medium).
Bahco Handled Three-Square Second Cut File 1-170 with an ERGO™ handle. These three-square files are ideal for deburring and filing angles and internal corners. Also for filing of holes and large fillets as well as concave surfaces. Its tapered surfaces make it well suited for flat filing. It has an equilateral triangle, tapered shape towards the point, and double cut surfaces. The two component handle gives comfort and control during use. It also incorporates a handy hanging slot. Size: 200mm (8in).Cut: Second Cut.
Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in).Size 100mm (4in).Side: 1/4in. Type: slim taper saw file.
Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in).Size 125mm (5in).Side: 9/32in. Type: slim taper saw file.
Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in).Size 150mm (6in).Side: 11/32in. Type: slim taper saw file.
Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Size: 4in.Type: extra slim taper saw file.
Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Width figures indicate the largest width of the file section. Size: 5in.Type: extra slim taper saw file.
The Bahco BAHCOFIT Slotted Flared Tip screwdrivers are suitable for slotted head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance Alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. Manufactured to ISO 2380 / DIN 5264 standards.Specifications: Tip: 4 x 0.8mm.Blade length: 100mm.Total length: 195mm.
The Bahco BAHCOFIT Slotted Flared Tip screwdrivers are suitable for slotted head screws. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The screwdrivers' blades are made from high performance Alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. Manufactured to ISO 2380 / DIN 5264 standards.Specifications: Tip: 5.5 x 1.0mm.Blade length: 125mm.Total length: 230mm.
