The Wiha Continuity Tester quickly and easily tests electrical connections, components, and equipment for continuity. Thanks to a signal sound and LED display the continuity measurement is easy to read. If the device is not in use for 30 seconds, it automatically switches off to save energy.In addition, the continuity tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit working environments. Both in the area of tested current and in various resistance areas, the continuity tester from Wiha offers reliable test results coupled with maximum safety according to CAT II up to 400 V. Conforms to EN 61010-1, IP40, CE CAT II 400V Standards. Specifications: Measurement Ranges: 0 - 500 kΩ and 0 - 10 Ω.Resistance Range 1: 0 to 500 kΩ / Range 2: 0 to 10 Ω.Testing Current Range 1: < 5 µA / Range 2: < 20 mA.Operating Temperature: 0 degreeC - 40 degreeC.Protection Class: IP 40.Power: 2 x AAA Batteries (supplied).
This Wiha Rotational Field Indicator comes with an integrated phase display. The rotation direction as well as the live phases are reliably indentified with the help of an LED display. A crocodile clip included with the delivery allows a simple connection, e.g. with a motor terminal board.In combination with the included test tips, the rotation indicator from Wiha offers great testing flexibility. The rotational field indicator works with the mains voltage itself, so no batteries are required.According to the measurement category CAT III up to 1,000 V and CAT IV up to 600 V the rotation indicator offers maximum safety for working directly on the source of low voltage installations. Confroms to IEC/EN 61010-1, IEC/EN 61577-7, IEC/EN 611010-031, IP40 CAT IV 600V Standards. Specifications: Current Input: 3,5 mA.Min. - Max. Voltage (AC/DC): 100-700V/100-700V.Max. Input Voltage per phase (Lx) against neutral (N): 400V.Operating Temperature: 0 degreeC - 40 degreeC.Protection Class: IP 40.
The Wiha Clamp Meter can be used to carry out measurements without interrupting the electrical circuit. Tests: voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests.A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check.Handling is greatly facilitated by the remote single-hand testing. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations. Conforms to IP40 CAT IV 1.000 V Standards. Specifications: Current (AC/DC): 400 A/400 A.Min. - Max. Voltage (AC/DC): 0-1,500V/0-1,500V.Resistance: 40 MΩ.Frequency: 5 MHz.Power: 2 x AAA Batteries (supplied).
This Wiha Voltage and Continuity Tester is made for standardised voltage testing, continuity testing, optical rotational field testing, single-pole testing, automatic polarity detection, resistance and frequency measurements. Thanks to a large digital LCD display with background illumination and an LED display, the measurement results are immediately readable. An additional signal sound indicates the current flow during the continuity check. A check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load.It also has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations. Complaint with the standards IEC 61243-3:2014, IP64, CE CAT III 1.000V / CAT IV 600V. Specifications: Voltage V AC (min. – max.): 0.5-1,000V.Voltage V DC (min. – max.): 0.5-1,500V.Single-pole Phase Test: 100 - 700 V AC.Protection Class: IP 64.Operating Temperature: -15 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
This Wiha Digital Multimeter equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible.A large LCD display makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. The storage of previous measurement values and their comparison to future measurement results allows a variety of control options.According to the measurement categories CAT III up to 600 V and CAT IV up to 300 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations. Conforms to EN 61010-1, EN 61010-2-033, EN 61010-031, IP 40, CE, GS CAT III 600V / CAT IV 300V Standards. Specifications: Current (AC/DC): 10 A/10 A.Min. - Max. Voltage (AC/DC): 0-1,000V/0-1,000V.Resistance: 200 MΩ.Frequency: 60 MHz.Temperature Measurement: -200 degreeC to 1,350 degreeC.Contamination Level: 2.Protection Class: IP 40.Operating Temperature: 0 degreeC - 50 degreeC.Capacity: 60 mF.Power: 2 x AAA Batteries (supplied).
The Wiha Voltage and Continuity Tester is made for standardised voltage testing, continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection.The LED display ensures easy to read measurement results. An additional signal sound indicates the current flow during the continuity check. A check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load.It also has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for people working on building installation and directly on the sources of low-voltage installations. Complaint with the standards IEC 61243-3:2014, IP64, CE CAT II 1.000V / CAT IV 600V. Specifications: Voltage V AC (min. – max.): 12-1,000V.Voltage V DC (min. – max.): 12-1,500V.Single-pole Phase Test: 100 - 700 V AC.Protection Class: IP 64.Operating Temperature: -15 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
This Wiha Digital Multimeter equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible.A large LCD display with background illumination and data hold function makes the measurement results immediately readable. The additional bar graph display ensures the quick and clear recognition of changes. An additional signal sound indicates the current flow during the continuity check.Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. Measurement of TRUE-RMS values facilitates the application of the measurement results.The storage of previous measurement values and their comparison to future measurement results allows various control options. Add to this optimal result finding through the generation of minimum and maximum values.According to the measurement categories CAT III up to 1000 V AC and CAT IV up to 600 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations. Confroms to EN 61010-1, EN 61010-2-033, EN 61010-031, IP40, CE CAT III 1000V / CAT IV 600V Standards. Specifications: Current (AC/DC): 10 A/10 A.Min. - Max. Voltage (AC/DC): 0-1,000V/0-1,000V.Resistance: 200 MΩ.Frequency: 60 MHz.Temperature Measurement: -200 degreeC to 1,350 degreeC.Contamination Level: 2.Protection Class: IP 40.Operating Temperature: 0 degreeC - 50 degreeC.Capacity: 60 mF.Power: 2 x AAA Batteries (supplied).
The Wiha Double Open-End Spanner Set, 12 Piece, is made from high-quality, chrome vanadium steel with a corrosion-resistant and easy-to-clean surface. The design enables high leverage without force, making it easy to open any fastening. With 15 degree jaw positioning, the double open-end spanners are perfect for working in confined spaces. They are also excellently suited for tightening screws and nuts. Conforms to DIN 3110. This 12 Piece set is supplied in a practical holder. The holder can be opened with just one hand in order to remove the right size from it. Its non-slip surface helps to ensure a strong hold even in oily or wet work situations. Contains the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 4 x 27, 25 x 28 & 30 x 32mm.
This Wiha Ring Ratchet Spanners Set, 12 Piece, are made from high-quality, chrome vanadium steel with a corrosion-resistant and easy-to-clean surface. The design enables high leverage without force, making it easy to open any screw connection. In addition, the end with the mouth is ideal for countering screws and nuts. With a jaw position of 15 degree, the jaw end is perfect for working in narrow spaces.Even when working with the ring ratchet, the user has a short return angle thanks to the fine toothing with 72 teeth and maximum comfort when working in cramped working environments thanks to the double hexagon. The right/left rotation can be variably adjusted via the integrated switch lever. Conforms to DIN 3113. This 12 Piece set is supplied in a practical holder. The holder can be opened with just one hand in order to remove the right size from it. Its non-slip surface helps to ensure a strong hold even in oily or wet work situations. Contains the following sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm.
The Wiha Stripping Tool comes with a rounded tool head and elongated ergonomic handle shape. The stripping tool fits perfectly into your hand, offering increased comfort even in difficult to access work areas. Designed for flush stripping of round and moisture proof cables with diameters 6-13mm (e.g. NYM 3 x 1.5mm² to 5 x 2.5mm²) without the need for setting the cutting depth manually in advance.The length arrester has been integrated into the housing this supports particularly precise working when processing series with the same stepped dimensions. A fastening clip ensures safe storage and prevents damage to the tool. Specifications: Overall Length: 140mm.Area Stripped (Min.-Max. Ø): 6-13mm.
This Wiha Automatic Stripping Tool is made for precise and safe stripping of cables up to 6mm². Can also be used to cut Cu and Al leads with a diameter of up to 2mm. These lightweight pliers ensure quick and precise skinning thanks to an integrated scanning system which adjusts automatically to the respective lead cross section, effectively preventing damage to the interior lead.In addition, the leads can be custom stripped with the adjustable length arrester from 5-12mm. If needed, the length arrester can also be entirely removed from the tool. The blades of the stripping tool are made of high-quality sturdy cutlery steel and can be replaced, if required. Space-saving and secure locking is ensured by the arrest option on the tool. Specifications: Overall Length: 190mm.Cross Section Area Stripped (Min. - Max.): 0.2-6mm².Area Stripped: 24-10 AWG.
The Wiha FibreBuzz Soft-Faced Hammer for the controlled positioning and joining of work pieces. The soft-faced hammer dead-blow allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. A special metal ball filling in the hammer head helps the soft-faced hammer to work completely without recoil and in a way' which is easy on the joints.Fitted with a high-quality, plastic fibreglass handle that is lightweight and an almost unbreakable. The non-slip, ergonomically shaped multi-component grip ensures a tight and secure grip that guarantees full control even when used with oily or wet hands. Integrated impact protection safeguards the work piece as well as the hammer from damage.In addition, the powerful connection between the hammer head and handle ensures greatest safety while working and the shatter-proof nylon heads can be independently replaced at any time. GS standard according to DIN 5134. Specifications: Hammer Face Diameter: 40mm.Hammer Head Height: 120mm.Overall Length: 320mm.Weight: 740g.
The 18 Piece Wiha electrician Tool Set provides and keeps all tools required for electrical applications within reach for constant access. At the same time, users have both hands free for working. All the VDE tools in this kit have been individually tested at 10,000 V AC for electrical safety in accordance with IEC 60900:2012. Approved for 1,000 V AC. Contains the following: 3 x SoftFinish electric slimFix Slotted Screwdrivers: 3.5 x 100mm, 4.0 x 100mm & 5.5 x 125mm. 1 x SoftFinish electric slimFix Pozidriv Screwdriver PZ1 x 80mm. 1 x SoftFinish electric slimFix TORX Screwdriver T10 x 100mm. 1 x SoftFinish electric slimFix PlusMinus/Pozidriv Screwdriver SL/PZ2 x 100mm. 2 x PicoFinish electric Fine Slotted Screwdrivers: 1.5 x 50mm & 2.5 x 65mm. 2 x PicoFinish electric Fine Phillips Screwdrivers: PH00 x 50mm & PH0 x 65mm. 1 x Professional electric Needle Nose Pliers 200mm. 1 x TriCut Professional electric Installation Pliers 170mm. 1 x Professional electric Diagonal Cutters with DynamicJoint 140mm. 1 x Longlife Electrician's Folding Ruler, 2m. 1 x 100 - 310lm Flashlight (LED, laser and UV) incl. 3 x AAA batteries. 1 x SoftFinish Single-pole Voltage Tester 110-250V. 1 x Measuring Tape 5m. 1 x Tool Belt Pouch.
The 113 Piece Wiha eMobility Workshop Trolley Set, contains a large assortment of insulated tools, compiled for work on hybrid and electric vehicles. All the VDE tools in this kit have been individually tested at 10,000 V AC for electrical safety in accordance with IEC 60900:2012. Approved for 1,000 V AC.Supplied in a Workshop Trolley. Tools are distributed over five drawers, the tools are protected and are clearly arranged in precisely fitting foam inserts. Thanks to the fully extendable drawers, the tools are always easily accessible. Additional storage space and the integrated 4-way power socket allow the trolley to be expanded individually, even with electrical appliances. Its roller runners can comfortably transport up to 150 kg of contents within the workshop. At the same time, the locks on the roller runners guarantee absolute stability and steadiness. Thus the workshop trolley can be used flexibly in mobile applications, as a stable work table and as a shelf. Contains the following: 1 x TorqueVario-S electric variable Torque Screwdriver 0.8-5Nm. 1 x SoftFinish electric slimVario Stubby bit holder Screwdriver. 6 x 75mm electric slimBit Slotted Bits: 2.5, 3.0, 3.5, 4.0, 5.5 & 6.5mm. 2 x 75mm electric slimBit Phillips Bits: PH1 & PH2. 2 x 75mm electric slimBit Pozidriv Bits: PZ1 & PZ2. 5 x 75mm electric slimBit TORX Bits: T8, T10, T15, T20 & T20. 5 x 75mm electric slimBit Hex Bits: 2.5, 3.0, 4.0, 5.0 & 6.0mm. 2 x 1/4in Insulated Extension for nut driver inserts: 75mm & 150mm. 1 x electric slimVario Adapter for 1/4in Nut driver. 1 x electric slimVario Extension for slimBits 6.0mm. 1 x TorqueVario-S electric Adapter for 1/4in Nut Driver. 8 x 1/4in Insulated Hex Nut Driver Inserts: 4.0 x 42mm, 5.0 x 42mm, 5.5 x 42mm, 6.0 x 42mm, 7.0 x 42mm, 8.0 x 42mm, 9.0 x 42mm & 10.0 x 42mm. 5 x 1/4in Insulated Internal Hex Nut Driver Inserts: 3.0 x 65mm, 4.0 x 65mm, 5.0 x 65mm, 6.0 x 65mm & 8.0 x 65mm. 1 x Cable stripping Knife for round cables. 1 x 100-310lm Flashlight (LED, laser and UV) incl. 3 AAA batteries. 1 x 3/8in electric Adjustable Torque Key for nut drivers. 1 x 3/8in Insulated Square Adapter for 1/4in Nut Drivers. 2 x 3/8in Insulated Extensions: 125mm & 250mm. 10 x 3/8in Insulated Hex Nut Driver Inserts: 11.0 x 45mm, 12.0 x 45mm, 13.0 x 45mm, 14.0 x 45mm, 16.0 x 45mm, 17.0 x 45mm, 18.0 x 45mm, 19.0 x 47mm, 21.0 x 47mm & 22.0 x 47mm. 1 x TorqueVario-S T electric T-handle Screwdriver 5-14Nm. 1 x TorqueVario-S T electric T-handle Adapter for 1/4in nut driver. 4 x Interchangeable electric TORX Blades (for torque screwdriver with T-handle electric): T15, T20, T25 & T27. 1 x Professional electric Water Pump Pliers with push button adjustment 250mm. 1 x Professional electric Diagonal Cutters with DynamicJoint 180mm. 1 x Professional electric Cable Cutters with switchable opening spring 210mm. 1 x Professional electric Combination Pliers with DynamicJoint 200mm. 1 x Professional electric Long flat-nose Pliers 160mm. 1 x Professional electric Needle Nose Pliers 200mm. 1 x Professional electric Stripping Pliers 160mm. 1 x Professional electric Type 13 Crimping Pliers 180mm. 15 x Single, Insulated Open-end Spanners: 6.0 x 90mm, 7.0 x 90mm, 8.0 x 100mm, 9.0 x 100mm, 10.0 x 110mm, 11.0 x 110mm, 12.0 x 130mm, 13.0 x 135mm, 14.0 x 145mm, 15.0 x 150mm, 16.0 x 160mm, 17.0 x 160mm, 18.0 x 175mm, 19.0 x 175mm & 22.0 x 195mm. 1 x electric Adjustable Spanner 0-30 x 250mm. 1 x eMobility Voltage & Continuity Tester 12-1,000V AC, CAT IV incl. 2x AAA batteries. 1 x Charger for 18500 Li-ion batteries with USB and Europlug. 1 x speedE E-screwdriver Handle . 2 x Insulating End Caps: 40mm & 60mm. 2 x Insulating Blanket Clamps: L=80mm & L=160mm. 1 x Protective IEC Blanket 1,000 (AC) / 1,500 (DC) (thickness 1mm). 1 x Pair of 100% Cotton Undergloves Size 9-10. 1 x Face Shield 1,000 V AC / 1,500 V DS (210 x 450mm/weight 400g). 1 x SoftFinish electric slimVario Bit Holder. 3 x Deep3/8in electric Double Hex Socket Wrench Inserts: M8 x 80mm, M10 x 80mm & M12 x 80mm. 1 x Pair of Electrically Insulating Gloves Size 10. 1 x Electric and Hybrid Vehicles Warning Sign. 1 x Battery Set, 18500 Li-ion 2 units in box.
The Wiha eMobility Voltage and Continuity Tester ensures electrical isolation. It is suitable for voltage testing, flow testing and rotational field testing. Also suitable for testing hybrid and electric vehicles as well as photovoltaic systems.The illuminated LED display shows present voltage on an 8-level scale, as well as 'the' actual value. It additionally offers the option of single-pole phase testing, optical rotational field display, as well as automatic polarity recognition.An integrated spacer makes quick one-handed testing possible. Whilst measuring point illumination makes it ideal for work in poorly lit working environments. For additional safety, a low battery charge is indicated directly on the LC display. Complaint with the standards EN 61010-1 and EN 61243-3:2014. Specifications: Min. - Max. Voltage (AC/DC): 12-1,000/12-1,500V.Contamination Level: 2.Protection Class: IP 64.Operating Temperature: -15 degreeC - 40 degreeC.Power: 2 x AAA Batteries (supplied).
The Wiha speedE II electric E-screwdriver is ideal for all screw-fastening tasks. Several fastenings per day, hundreds of fastenings per week. Professional craftspeople invest a great amount of time and energy in recurring fastening tasks. The resulting pain in wrists is the body’s natural reaction. Thanks to the electric drive of the e-screwdriver speedE II, joints and tendons are protected, especially during continuous use. In addition the required time is reduced to one-third.An extra highlight of the speedE II is the integrated material function. Sensitive fastenings, for example, plastic socket covers, must not be tightened too hard or the material will be damaged. In such cases, the speedE II automatically switches off at 0.4Nm and gives the user full control to carefully carry out the final fastening by hand. If there are fastening tasks requiring more force, the second generation speedE offers the option of increasing the electric force to 1.0Nm via a sliding switch.The colour of the slimBits serves as an aid for adjusting the correct force level to the respective application. Red slimBits with the smaller profiles are used in the red slide position, while the yellow Power SlimBits with the larger profiles indicate in this case, the more powerful yellow slide position can be used. If more force is required, the speedE can be manually used up to 12Nm without incurring any damage.The enlarged ring switch and smooth rotation ensure even easier handling. Thanks to the combination of facilitated handling and the ergonomic SoftFinish handle design, the e-screwdriver speedE II is recommended by doctors and therapists from the German Campaign for Healthier Backs. During the fastening, the integrated LED light provides permanent illumination for an optimal view of the screw. The powerful LED can also be used as a flashlight by tapping on the ring switch. slimBits are individually tested at 10,000 V AC and approved for 1,000 V AC. Supplied with: 1 x slimBit electric Slotted/Pozidriv Power Bit SL/PZ2 x 75mm.1 x slimBit electric Slotted Bit 3.5 x 75mm.2 x Li-ion Batteries.1 x Li-ion Charger with USB.1 x Mini L Boxx.
The Wiha Voltage Detector, Explosion Protected is used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight.With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1 / IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
This Wiha Stripping Multi-tool is for precise and safe stripping of round cables 8 - 13mm (3 x 1.5mm² to 5 x 2.5mm²) with round and longitudinal cutting. The optimized cable guidance guarantees safe, precise and comfortable stripping without having to adjust the cutting depth in advance.Furthermore, the multi-tool guarantees clean stripping of flexible and solid conductors in the range of 0.5 - 6.0mm². Even in hard-to-reach areas, flush stripping is no challenge with the handy and non-slip handle. An integrated hook blade can be securely locked and completely recessed into the housing for protection. For safe and space-saving storage, the stripping tool can be locked in a closed position. Specifications: Length: 125mm.Area Stripped: Cross Section 0.5-6mm², Diameter 8-13mm, AWG 20-10.
The Wiha Stripping and Assembly Tool offers the user all the necessary functions required for processing a coaxial cable with F-screw connector in one compact tool.Precisely fitting and stripping of coaxial cables with an outer diameter of 6 to 8mm can be carried out in just one work step. The stripping is performed quickly and in a space-saving manner by means of multiple rotary movements using two pairs of blades positioned opposite each other.The already adjusted stripping dimension is designed for common F-screw connectors. In the next step, the integrated gripping jaws can be used to screw F-connectors onto the already stripped cable.Then the open hexagon SW11 ensures easy assembly or disassembly of the F-connector. The hexagon offers very good accessibility and is easy to operate, especially in confined work environments.For safe and space-saving storage, the tool can be locked in a closed position by means of a slide. Specifications: Overall Length: 125mm.Area Stripped (Min.-Max.): 6-8mm.Hex Head: 11.0.
The Wiha Stripping Tool comes with a self-turning inner blade which automatically adjusts from round to longitudinal cutting. An adjusting screw provides a variable cutting depth for convenient stripping of all common round cable from 4-28mm in diameter.The self-tensioning retaining clip ensures safe cable guidance, which at the same time guarantees the user's safety as a permanent cover for the blade. During application, the stripping tool lies perfectly in your hand at all times thanks to the large handle size. The tool handle also contains a spare blade. Specifications: Overall Length: 130mm.Area Stripped (Min.-Max.): 4-28mm.
This 76 Piece Wiha XL eMobility Tool Case Set is for working on electric vehicles, charging stations and wall-mounted vehicle charging equipment. All the VDE tools in this kit have been individually tested at 10,000 V AC for electrical safety in accordance with IEC 60900:2012. Approved for 1,000 V AC.Supplied in a XL eMobility tool case. Made of robust polypropylene and is equipped with gas pressure shock absorbers, which hold the lid in various positions, prevent uncontrolled closing of the lid and thus prevent injuries to the user. The tool inserts have been designed to help you work efficiently by ensuring that all tools are quickly and easily accessible. Additional storage space is provided by free lugs and extra space in the bottom tray of the case. In addition, the ergonomic two-component handle guarantees a comfortable carrying experience. The contents of the case can be secured against theft with padlocks on the integrated eyelets (not included). Contains the following: 18 x 1/4in Insulated Hex Nut Driver Insert: 4.0 x 42mm, 5.0 x 42mm, 5.5 x 42mm, 6.0 x 42mm, 7.0 x 42mm, 8.0 x 42mm, 9.0 x 42mm, 10 x 42mm, 11 x 42mm, 12 x 42mm, 13 x 42mm, 14 x 42mm, 16 x 45mm, 17 x 45mm, 18 x 45mm, 19 x 47mm, 21 x 47mm and 22 x 47mm. 4 x SoftFinish electric slimFix Slotted Screwdrivers: 3.5 x 100mm, 4.0 x 100mm, 5.5 x 125mm & 6.5 x 150mm. 2 x SoftFinish electric slimFix Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm. 5 x SoftFinish electric slimFix TORX Screwdrivers: T20 x 100mm, T25 x 125mm, T27 x 125mm, T30 x 125mm & T40 x 150mm. 4 x SoftFinish electric Hex Nut Drivers: 7.0 x 125mm, 8.0 x 125mm, 10.0 x 125mm & 13.0 x 125mm. 2 x 3/8in Insulated Extensions for nut driver inserts: 125mm & 250mm. 1 x slimVario electric Adapter for 1/4in Nut Drivers. 1 x 3/8in electric Adjustable Torque Key for Nut Drivers. 1 x Insulated Square Adapter 3/8in for 1/4in Nut Drivers. 1 x TorqueVario-S electric Adapter for 1/4in Nut Drivers. 3 x 3/8in Deep electric Socket Wrench Double Hex Inserts: M8 x 80mm, M10 x 80mm & M12 x 80mm. 3 x 1/4in Insulated Internal Hex Nut Drivers: 4.0 x 65mm, 6.0 x 65mm & 8.0 x 65mm. 1 x TorqueVario-S electric Torque Screwdriver Set, 14 Piece incl. folding bag. 1 x Electric and Hybrid Vehicles Warning Sign. 4 x Insulating End Caps: 40mm (x2) & 60mm (x2). 1 x Pair of Electrically Insulating Gloves Size 10. 1 x eMobility Voltage & Continuity Tester 12-1,000V AC, CAT IV incl. 2x AAA batteries. 1 x 100-310 lm Flashlight (LED, laser & UV) incl. 3 AAA batteries. 1 x Cable Stripping Knife for round cables 200mm. 1 x Professional electric Water Pump Pliers with push button adjustment 250mm. 1 x Professional electric Cable Cutters with switchable opening spring 210mm. 1 x Professional electric Diagonal Cutters with DynamicJoint 180mm. 1 x Professional electric Long flat-nose Pliers 160mm. 1 x Professional electric Curved Needle Nose Pliers 200mm. 1 x Professional electric Combination Pliers Professional electric with DynamicJoint 200mm.
This 106 Piece Wiha XXL III electric Tool Case Set is supplied in a XXL III electric tool case. Made of robust polypropylene, fitted with gas-filled shock absorbers which hold the lid in different positions, preventing it from closing accidentally and smashing fingers. It is fitted with extra large wheels so its easy to pull the case along. The legs can be folded out, turning the case into a slip-proof step. In addition, the raised position allows the comfortable and strain-free removal of the tools. The V-shaped incision with a scale in the lid of the case facilitates the sawing of materials, such as cable ducts, at the construction site. Contains the following: 1 x slimVario electric Tool Set, 32 Piece (inc. multifunctional bag). 1 x Pair of Classic Wrench Pilers 250mm. 1 x Automatic Stripping Tool up to 16mm². 1 x Automatic Crimp Tool for wire-end sleeves hex crimping 0.08-16. 1 x Crimping Tool for insulated cable eyes and contacts 0.5-6. 1 x Professional electric Cable Cutter with switchable opening spring 180mm. 1 x Professional electric Needle Nose Pliers 200mm. 1 x Professional electric Diagonal Cutters with DynamicJoint 160mm. 1 x TriCut Professional electric Installation Pliers 170mm. 1 x BiCut Professional High-performance Diagonal Cutters with DynamicJoint 200mm. 1 x electric Hacksaw with 3 x Saw Blades 150mm. 1 x XLSelector Y Bit Set, 32 Piece. 1 x Single-pole, Non-contact Volt Detector, 12–1,000V AC Inc. 2 x AAA Batteries. 1 x Universal Key. 1 x Magicring Hex L-key Set, 10 Piece in ErgoStar holder (1.5-10mm). 1 x Flashlight (LED, laser and UV) Inc. 3 x AAA Batteries. 1 x Stripping Tool for round cables. 1 x Longlife Electrician's folding Ruler 2m. 1 x Electrician's Hammer 300g. 1 x Dowel racket set SoftFinish with 6 mm round blade and 4 dowels (41289). 1 x SoftFinish One-piece Hexagonal Blade Screwdriver with a solid steel cap 12.0 x 200mm. 3 x SoftFinish electric slimFix Slotted Screwdrivers: 3.5 x 100mm, 5.5 x 125mm & 6.5 x 150mm. 2 x SoftFinish electric slimFix Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm. 2 x SoftFinish electric slimFix PlusMinus/Pozidriv Screwdrivers: SL/PZ1 x 80mm & SL/PZ2 x 100mm. 1 x Electrician's Spirit Level 40cm. 1 x SoftFinish Bottle Opener.
This 9 Piece Wiha Hammer Set is for all application fields, especially delicate surfaces. Contains eight interchangeable round hammer faces. These heads can be quickly and easily changed for the task at hand using the supplied hexagon L-key. GS tested. Supplied in a robust metal box. Contains the following: 1 x Safety Hammer with a high-grade hickory handle. 1 x Round Soft Face. 2 x Round Medium-soft Face. 2 x Round Medium-hard Faces. 1 x Round Hard Face. 1 x Round Very Hard Face. 1 x Hexagonal Ball End L-key 6.0mm.
This 14 Piece Wiha TorqueVario-S ESD Screwdriver Set used for controlled fastening at a specific torque on components susceptible to electrostatic discharge. Comes with a factory calibration certificate. Conforms to DIN EN ISO 6789 & IEC 61340-5-1 Standards. Supplied in practical plastic box. Contains the following: 1 x TorqueVario-S ESD Screwdriver. Manufactured in line with the IEC 61340-5-1 international standard and thus guarantees maximum protection for electronic components. It has a surface resistance between 106 and 109 ohm and safely channels electrostatic energy away in a controlled fashion. Thanks to its integrated numeric scale and the supplied adjusting tool, variable torque settings can be made, therefore covering a wide application field. A clearly audible and tactile signal is emitted when triggering the set torque value, guaranteeing process-safe work, protecting material and eliminating follow-up work. With a release accuracy of ± 6%, the torque tool complies with EN ISO 6789 requirements. 1 x 1/4in Bit Holder with ball. 1 x Setting Tool for torque screwdriver. 2 x Standard Slotted Bits: 4.0 & 4.5mm. 2 x Standard Phillips Bits: PH0 & PH1. 2 x Standard Pozidriv Bits: PZ0 & PZ1. 4 x Standard TORX Bits: T4, T5, T6 & T8.
