Bahco File Set 5 Piece, Engineers 8in file set, all are fitted with ERGO™ handles for comfort. Comes with:1 x 1-210-08-1-2 half-round bastard cut file.1 x 1-230-08-1-2 round bastard cut file.1 x 1-100-08-1-2 hand bastard cut file.1 x 1-100-08-2-2 hand second cut file.1 x 1-160-08-1-2 square bastard file. Supplied in a plastic roll wrap.
This Monument AC4P Autocut® Plastic Waste Pipe Cutter is suitable for 1.1/2in Push Fit and Solvent Weld waste pipe. Whilst nominally called 1.1/2in pipe, the Push Fit and Solvent Weld pipe actual sizes vary from 37mm I.D. inner diameter to 43mm O.D. outer diameter.
The FatMax® Concrete Saw has a specially designed 660mm (26in) blade which is ideal for cutting cellular blocks and soft stone. The teeth are induction hardened and the comfortable bi-material handle is screwed and ultrasonically welded. the handle is marked with 45° and 90° angles and the blade has 1.4 teeth per inch.
The 32 Piece Wiha slimVario electric Tool Set, covers all standard screw profiles and is thus flexible in its use. All the VDE tools in this kit have been individually tested at 10,000 V AC for electrical safety in accordance with IEC 60900:2012. Approved for 1,000 V AC.Thanks to Wiha slimTechnology, the slimBit blades in the kit are up to 33% slimmer and can thus also easily reach low-lying screw and spring elements. When these slim blades are used with the extra-short Stubby handle, screws can be effortlessly reached even in confined spaces. The 6mm slimBits and nut driver inserts can only be used with speedE, slimVario or TorqueVario-S electric tools.Supplied in a robust multifunctional bag. When unfolded, it functions as a work bench stand for easy retrieval of the tools. There is also a strap for hanging the bag on the wall. Contains the following: 1 x SoftFinish electric slimVario Stubby Bit Holder Screwdriver. 1 x PicoFinish electric slimVario Fine Screwdriver. 1 x SoftFinish electric slimVario Bit Holder Screwdriver. 1 x electric slimVario Extension for slimBits. 1 x electric slimVario Adapter for 1/4in Nut Drivers. 4 x 75mm slimBit electric Slotted Bits: 2.0, 3.5, 5.5 & 6.5mm. 3 x 75mm slimBit electric Phillips Bits: PH0, PH1 & PH2. 2 x 75mm slimBit electric Pozidriv Bits: PZ1 & PZ2. 4 x 75mm slimBit electric TORX Bits: T10, T15, T20 & T25. 2 x 75mm slimBit electric PlusMinus/Pozidriv Bits: SL/PZ1 & SL/PZ2. 3 x 75mm slimBit electric Hex Bits: 3.0, 4.0 & 5.0mm. 8 x 1/4in Insulated Hex Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 10, 11 & 13mm.
The Faithfull Plasterer's Bath is manufactured from heavy-duty polyethylene and is virtually unbreakable. Guaranteed not to rot, rust, crack or distort in adverse weather conditions. Strong, light and easily carried. Ideal as a rendering skip, water trough, or rubble container. Capacity: 165 litres.
The Stanley FatMax® Closed Case Long Tape has a 10mm wide stainless steel blade that resists rusting and has metric only graduations. Its closed case design helps to protect the blade and internal workings and has a non-slip rubber grip. The 3:1 gear ratio provides 3x faster rewind and a steel roller cage protects the case from being cut by the blade during retraction. There is also a corrosion resistant Tru-zero folding end hook for accurate measurements.The Stanley FatMax® Closed Case Steel Long Tape has metric graduations only. Blade Length: 20mBlade Width: 10mmAccuracy: EC Class II
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 506 Spring Dividers have the following specifications: Size: 150mm (6in).
The Vitrex Xtreme Rubber Floor Mallet is ideal for setting flooring, safely and securely. The 16oz white rubber head does not mar or damage surfaces and measures 70-75 on the Shore A hardness scale, for a firm hardness with minimum bounce when striking. The mallet is ideal for multiple applications and its 29cm co-moulded plastic handle with non-slip, rubber grip makes it comfortable for repeat use.
The Stanley 4-in-1 Pocket Driver has a non slip textured surface that will not slip, crack or peel. It has a soft bi-material grip for comfort and is made from S2 tool steel for maximum durability. Magnetic bits attract and hold small screws. Contains: 2 x Double Ended Bits: Slotted 3mm (1/8in)/PH1, Slotted 4mm (5/32in)/PH00.
Stanley professional smoothing planes are designed for final finishing of cabinet and general joinery work. They are made from accurately machined fine grey iron castings and have a simple and rapid adjustment mechanism, with easy blade removal for sharpening and finger tip adjustment for depth of cut and cutter alignment. A black epoxy finish with plated parts and chrome carbon cutter enhance the attributes of these models.Length: 9.3/4in Cutter width: 2 inch
These Stanley FatMax® VDE pliers are manufactured to exacting European standards, individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are made from a heat treated, high chrome steel forging for long life and have hand ground, induction hardened blades. DIN /ASO/ANSI compliant. This 4 piece set contains the following:1 x 165 mm Combination plier.1 x 175 mm Diagonal cutting plier.1 x 160 mm Half round nose plier.1 x 170 mm Wire stripping plier.
The Stanley FatMax® Pozidriv tip screwdrivers have a chrome vanadium steel bar which allows high torque and reduces the risk of tip breakage, and the handle is moulded directly to the shaft for a virtually unbreakable bond which gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws.Type - PozidrivTip Size PZ.3Blade Length 150mm (6 in)
The Stanley Moulded Body Surform® Plane for use on all types of wood, aluminium, copper, plastic and laminates. It has a lightweight plastic moulded body with a thumb screw for quick blade release. Fitted with a standard cut 250mm (10in) blade. The blade can be changed without the use of additional tools. Overall Length: 270mm (10.1/2in).
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 38mm (1.1/2in)
These Stanley Groove Joint Pliers are made from drop-forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control. Size: 250mm.
Replacement Surform® blades for use on all types of wood, vinyl, plaster thermalite, fiberglass and linoleum.1 x Stanley Surform® Shaver Tool Blade 60mm (2.1/2in) Replacement blade for Surform® Shaver Tool (STA521115)
The Hultafors Tri-Lok Pocket Tape is an accurate, durable and reliable tape ideal for the professional user, having polyester coated blade and clear 2-colour printing on a yellow background. Features a tough grey ABS case with a non-slip rubber grip pad. The Tri-Lok tape has an easy-to-use brake which holds the blade securely at the desired length, and the effective bump stop gives added blade and end-hook protection during use. It is also fitted with a belt clip and self-zeroing end-hook. Available with both metric and imperial graduations, or metric only. The blade is accurate to EC Class I. Made in Britain.This Hultafors TL8ME Tri-Lok Pocket Tape is an accurate, durable and reliable tape ideal for the professional user, having polyester coated blade and clear 2-colour printing on a yellow background. It features a tough grey ABS case with a non-slip rubber grip pad. The Tri-Lok tape has an easy-to-use brake which holds the blade securely at the desired length, and the effective bump stop gives added blade and end-hook protection during use. It is also fitted with a belt clip and self-zeroing end-hook. Available in metric graduations only. The blade is accurate to EC Class I. Made in Britain. Specifications: Blade Length: 8m/26ft.Blade Width: 25mm.Accuracy: EC Class I.
Teng Tools sockets are manufactured from strong chrome vanadium steel in accordance with ISO9000 and AS954. They provide excellent torque, whilst reducing the risk of rounding fasteners. This T1436 1/4 inch drive metric socket set comprises 36 pieces, which are supplied in a plastic carrying case which has a snap lock lid and metal pin hinges. This 36-piece set contains the following:10 x 1/4in Hex Sockets: 4, 5, 5.5, 6, 7, 8, 10, 11, 12 & 13mm.6 x 1/4in Hex Deep Sockets 6, 7, 8, 10, 12 & 13mm.1 x 1/4in Reversible Ratchet, 1 x 1/4in Hex Adaptor.1 x 1/4in Universal Adaptor.2 x 1/4in Extensions: 50 & 100mm.1 x 1/4-3/8in T-Bar Adaptor.2 x 1/4in Slotted Bits: 4 & 5.5mm.2 x 1/4in Phillips Bits: PH1 & PH2.2 x 1/4in Pozidriv Bits: PZ1 & PZ2.2 X 1/4in Hex Bits: 5 & 6mm.3 x 1/4in Torx Bits: TX10, TX15 & TX20.3 x Hex Keys: 1.5, 2 & 2.5mm. In plastic box with snap lock & metal hinges.
Teng Socket Converters convert sockets of one size drive to another. They consist of a male drive fitting of one size attached to a female drive fitting of another size. Manufactured from chrome vanadium steel for strength and durability, and has a satin finish.This Teng Tools adaptor has the following specifications: Female Drive: 3/4in.Male Drive: 1/2in.
The screwdrivers in this Stanley Tools 6 piece precision set have a soft cushion grip for comfort. They are supplied in a handy plastic storage case. The set contains the following: 2 x Phillips: PH0 and PH1.4 x Slotted: 1.4, 2.0, 2.4 and 3.0mm.
These Knipex 97 21 Crimping Pliers for cutting cables, stripping wires and crimping insulated and non-insulated terminals, connectors and plug type connectors. With threaded holes for cutting copper and brass threaded screws. M2.6 - M3 - M3.5 - M4 - M5. For insulated terminals and cable connectors of 0.5 - 6.0mm².
Knipex TubiX XL Pipe Cutter with a spring-loaded QuickLock mechanism, holds the tool on the pipe once locked in place. Its cutting wheel is made of high-grade ball-bearing steel. High-quality needle-bearings enable the cutting wheel and four guide rollers to cut with ease. The lightweight and durable aluminium housing incorporates a removable, precision-ground deburring tool. It Is quick and easy to replace the cutting wheel, no tools required, a spare cutting wheel can be stored in the handle.The Knipex TubiX XL Pipe Cutter is suitable for both the electrical trade, as it cuts rigid steel conduits, and for stripping steel wire armoured cables. Specification: Cuts Pipes: Ø 6-35mm (1/4-1.3/8in).Max. Wall Thickness: 2mm.
The Knipex Precision ESD Electronics Side Cutters are fitted with electrically discharging handles (dissipative). They provide an optimised flush cutting result in soft materials and are perfect for installations with tight tolerances and for precise configuration of wire ends. These pliers are 20% lighter than conventional electronics pliers and are fitted with ergonomically optimised multi-component handles. The extremely precise ground and sharp cutting edges are perfect for exact cutting on delicate electronic components and the cutting edges have been additionally induction hardened to approx. 64 HRC. Cutting blades are made of high-quality ball bearing steel with a polished finish and have been processed with the highest degree of care. They have a bolted joint that has carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Each opening movement is gentle and even without backlash, thanks to the smooth-running double spring. Each work step proceeds reliably and precisely. This makes work much easier for professionals. Specification Length: 125mm.Cutting Capacity: Soft Wire: 0.1-1.3mm.Weight: 58g.
The Knipex 25 Series Snipe Nose Side Cutting Pliers (radio pliers) are suitable for finer gripping and cutting work. They have pointed half-round jaws, knurled gripping surfaces and cutting edges, 61 HRC. Made from forged chrome vanadium electric steel, then oil-hardened. Available with a PVC or Multi-Component grip. Specification Cutting Capacity: Hard: 1.6mm, Medium: 2.5mm.These Knipex Snipe Nose Side Cutting Pliers (Radio) are fitted with multi-component grips.
Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm + - 0.025mm.Below 25mm + - 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 15mm
The Norbar Professional Adjustable 'Mushroom' Head Torque Wrenches are fitted with Norbar’s ‘Industrial’ style of ratchet. Using the principle of ‘offset pawls’, these ratchets feature a robust tooth pattern and a narrow engagement angle, meaning that the wrench is easy to use in tight spaces. The square drive features a finger grip on the top (the ‘mushroom’ head) that assists with running down the nut until resistance is met. The square drive can also be removed and replaced in the opposite direction so the wrench can give torque control in both the clockwise and anti-clockwise directions. The ‘Industrial’ ratchet is specifically designed for torque wrench application and provides users with the perfect combination of strength, versatility and ease of use. Factory calibrated to ±3% and the new mechanism ensures that the accuracy is retained for longer. They have a new ergonomic handle with a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. There is a secure push/pull locking mechanism that is quick and intuitive to use and prevents accidental wrench adjustment. They are fitted with a large scale window and long scale length for great visibility and accurate setting. Unique on a torque wrench, the Timestrip® gives a visual indication that the wrench is due for re-calibration. Every wrench is supplied with a declaration of conformance of ISO 6789:2017 and in a sturdy plastic case.Norbar Pro 340 Adjustable 'Mushroom' Head Torque Wrench 1/2in Drive 60-340Nm Part Number: 15006.Accuracy: ±3%.Operates Between: 60-340Nm/50-250lb.ft.Square Size: 1/2in.Ratchet Teeth: 60.Ratchet Diameter: 51mm.Length: 685mm.Weight: 1.48kg.
The Norbar Pro Adjustable Dual Scale Torque Handle has been factory calibrated to plusmn;3%. A newly designed mechanism ensures the accuracy is retained for longer. The secure push/pull locking mechanism is quick and intuitive to use and prevents accidental adjustment. There is also a large scale window and long scale length for great visibility and accurate setting. The ergonomic handle features a high proportion of soft-feel, high grip material. Both the handle material and lens resist all chemicals in common automotive, industrial and aviation use. Supplied with a Calibration Certificate, which meets the requirements of ISO 6789-2:2017. This Norbar Pro Adjustable Dual Scale Torque Handle has the following specifications: Drive: 16mm Spigot.Range: 10-50Nm (7.5-37.5 lbf.in).Length: 322mm.Weight: 0.62kg.
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/25 Steel Wrecking Bar 635mm (25in).
The Hultafors Quattro Bevel Square is an innovative adjustable square which also functions as a bevel square and an angle finder. The rotatable blade features fixed positions for 45 degree, 90 degree, 135 degree (180 degree, 225 degree and 270 degree). By rotating the blade more than 180 degree the opposite side of the stock where there is no slit can be used - for example, to provide a straight edge thin sheet metal cannot slide into. By shifting the lever, the Quattro can also be used as a bevel square to copy any angle between 0 and 270 degrees. A lever allows you to lock it at whatever angle you like. There is a scale on both the blade and handle to measure angles between 0 and 90 degrees. The square is also completely foldable, which makes it easy to store and carry in the pocket. The blade is 45mm wide to accommodate work with standard stud dimensions and has a centre line making it easy to quickly mark out both sides of a stud. It also has scribing notches, spaced 5mm apart, which can be used to draw or cut a line parallel along an edge. A robust joint and a 2 cm long blade of 1mm thick, high-strength stainless steel provides a very durable design withstanding tough working environments, and will last a long time. Carefully selected materials and manufacturing techniques such as a CNC-milled stock and a blade cut with a precision laser provide high accuracy; angle tolerance ±0.06 degree (±1 mm/m).
This Hultafors PRSS Short Tape has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. Type approved according to EU Class I.Hultafors Short Stainless Steel Tape PRSS 4m has a polyester coated stainless-steel blade and a stainless-steel spring, and is made for work in wet environments. The tape is graduated using highly accurate inkjet printing to give you optimal contrast, and precision when measuring. It comes with a smooth blade return action and bump-stop with an anti-wear function protecting the blade and end-hook. The end-hook adjusts itself for internal measuring, while the casing is made from high impact ABS plastics, rubber-coated for a better grip and impact resistance. It comes with a metal belt clip. Type approved according to EU Class I. Specifications: Blade Length: 4m. (Metric only).Blade Width: 19mm.
BlueSpot Flexible Ratchet Spanner with a 180 degree pivoting ratchet ring head. Manufactured from chrome vanadium steel. Heat-treated and nickel-plated for increased durability. Fully polished mirror finish. The 5 degree ratcheting increment makes it ideal for use in tight spaces. 72 teeth.1 x BlueSpot Tools 180 degree Flexible Head Ratchet Spanner 19mm.
The BlueSpot Tools External Chamfer/Deburring Tool is used to clean and repair the thread of damaged threads and studs between 3-19mm. The blades are manufactured from Tungsten Carbide which is extremely hard wearing and has a very high melting point (2,600°) making it ideal for cleaning threads and studs. For use on stainless steel, hardened steel, mild steel, copper, brass, fibreglass, hard plastic and more. Ideal for use with electric drills. Specifications: Shank: 1/4in Hex.Chamfer Angle: 50° (approx.)
The BlueSpot Tools Large Inspection Mirror with 360° rotation for easy adjustment and an all-round view. The mirror is mounted on twin ball joints for easy adjusting and positioning. Designed for inspecting underbody elements of vehicles and cavity spaces. Specification: Length: 280mm to 880mm.Mirror Diameter: 85mm.
Diafold whetstones feature a carrying case that unfolds into a permanently attached handle. When folded, this carrying case protects the tool's surface. When unfolded, the handle facilitates ease of use. It reaches virtually anywhere where there is an edge to be honed. The length of the sharpening area is 110mm.Black Extra Coarse. 220 grit.Size 110mm.
