For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size: 14in.Cut: hand second.Tanged.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 100mm (4in)Cut: hand secondTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 200mm (8in)Cut: hand secondTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 300mm (12in)Cut: hand smooth.Tanged.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 100mm (4in)Cut: hand smooth.Tanged.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 150mm (6in)Cut: hand smooth.Tanged.
Conical edges and surfaces which taper to a point. Flat uncut back, surfaces double cut, thin edge single cut. For fine filing and polishing jobs.Size: 16cm.Cut: 2 (smooth).Type: Knife needle file.
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-30-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-50-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 50m/165ft Blade Width: 13mmAccuracy: EC Class II
These Bahco Aviation Compound Snips are designed for occasional use by craftsmen and at home. They are forged from steel containing chromium and molybdenum for good resistance, with cutting edges milled, serrated and hardened to 60-62 HRC. They are fitted with soft grip handles and a return spring for comfortable use. The handles are colour coded depending on the type of cut they provide: Red Handle: Left Cut, Green Handle: Right Cut, Yellow/Blue Handle: Straight Cut. Specification: Cutting Capacity: Stainless Steel 0.7mm, Cold Rolled Steel 1.2mm1 x Bahco MA401 Red Aviation Compound Snips Left Cut 250mm (10in)
These Bahco Aviation Compound Snips are designed for occasional use by craftsmen and at home. They are forged from steel containing chromium and molybdenum for good resistance, with cutting edges milled, serrated and hardened to 60-62 HRC. They are fitted with soft grip handles and a return spring for comfortable use. The handles are colour coded depending on the type of cut they provide: Red Handle: Left Cut, Green Handle: Right Cut, Yellow/Blue Handle: Straight Cut. Specification: Cutting Capacity: Stainless Steel 0.7mm, Cold Rolled Steel 1.2mm1 x Bahco MA411 Green Aviation Compound Snips Right Cut 250mm (10in)
These Bahco Aviation Compound Snips are designed for occasional use by craftsmen and at home. They are forged from steel containing chromium and molybdenum for good resistance, with cutting edges milled, serrated and hardened to 60-62 HRC. They are fitted with soft grip handles and a return spring for comfortable use. The handles are colour coded depending on the type of cut they provide: Red Handle: Left Cut, Green Handle: Right Cut, Yellow/Blue Handle: Straight Cut. Specification: Cutting Capacity: Stainless Steel 0.7mm, Cold Rolled Steel 1.2mm1 x Bahco MA421 Yellow/Blue Aviation Compound Snips Straight Cut 250mm (10in)
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 16 teeth per 10mmSize 250mm (10in)Tanged
Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard.This type of file is suitable both as an engineering file and a sharpening file. It is useful for filing where a smooth finish is important. Also good for polishing and deburring work in lathes. This file is also widely applicable for sharpening tools and implements such as spades, shovels, hoes, scrapers, etc. Bastard CutApprox 14 teeth per 10mmSize 300mm (12in)Tanged
The Bahco 5-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical retaining clip and the key profiles are zinc die-cast for increased durability. The Master Key has 4 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a magnetic 5mm square and 1/4in bit holder, and a magnetic pocket for 1/4in bits in 7-8mm square profile. It has the following functions: 3 x Square: 5, 6 & 7-8mm. 1 x Triangular: 9mm. 1 x Two-way: 3-5mm.
The Bahco 9-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical securing chain and snap-hook. The key profiles are zinc die-cast for increased durability. The Master Key has 8 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a 5mm square key suitable for aerating radiator valves and a 1/4 inch magnetic bit holder. It has the following functions: 4 x Square: 5, 6, 7-8 & 9-10mm. 3 x Triangular: 7, 8-9 & 10-11mm. 1 x Two-way: 3-5mm. 1 x Half-moon: 6mm.
The Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has a non-reflective, nylon coated, stainless steel blade, with easy-to-read high contrast metric and imperial graduations on both sides of the blade. Its edges have been purposely deburred to help prevent the paint/coating from peeling with time and use. The stainless steel blade is 100% corrosion resistant and can be completely immersed in water for extended periods of time to no ill effect. Fitted with a magnetic, zero end hook, ideal for working with metal. Its bi-material case is made from impact resistant ABS plastic with an integrated belt clip. The automatic locking system makes it easier to use, the blade stays out until the retraction button is activated. This Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has the following dimensions: Blade Length: 5m/16ftBlade Width: 25mm
The Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has a non-reflective, nylon coated, stainless steel blade, with easy-to-read high contrast metric and imperial graduations on both sides of the blade. Its edges have been purposely deburred to help prevent the paint/coating from peeling with time and use. The stainless steel blade is 100% corrosion resistant and can be completely immersed in water for extended periods of time to no ill effect. Fitted with a magnetic, zero end hook, ideal for working with metal. Its bi-material case is made from impact resistant ABS plastic with an integrated belt clip. The automatic locking system makes it easier to use, the blade stays out until the retraction button is activated. This Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has the following dimensions: Blade Length: 8m/26ftBlade Width: 25mm
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 2.5 mm (3/32in). Length: 125 mm (5in).
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 2.0 mm (5/64in). Length: 125 mm (5in).
Bahco Dovetail Saw for use on wood and plastic materials. Fine universal hardpoint toothing and light steel back for rigidity. The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted. Blade Length: 250mm (10in).Right and Left Hand SawTeeth 15 tpi
Bahco Dovetail Saw for use on wood and plastic materials. Fine universal hardpoint toothing and light steel back for rigidity. The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted. Blade Length: 250mm (10in).Left Hand SawTeeth 13 tpi
Bahco Dovetail Saw for use on wood and plastic materials. Fine universal hardpoint toothing and light steel back for rigidity. The flexible version has a handle which swings to allow both left and right hand sawing where access is restricted. Blade Length: 250mm (10in).Right Hand SawTeeth 13 tpi
Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 270mm (10 1/2 in)Teeth 18.5 tpi
Bahco ProfCut replacement blades are available for Bahco Pullsaws. The variations are fine, extra fine or a double sided blade.Blade onlyLength 270mm (10 1/2 in)Teeth 18.5 tpi
Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 300mm (12 in).Teeth 13.5 tpi
Bahco ProfCut Tenon Saw is a professional tenon saw for fine and medium thick materials, specially adapted for the cutting of small-section timber and mitre guide sawing. Hardpoint teeth for long lasting sharpness. Heavy steel back for rigidity and accurate cutting. Length 300mm (12 in)Teeth 11 tpi
Bahco PC-12-VEN ProfCut Veneer Saw for fine and medium thick materials such as plywood, veneers, laminates and plastics. With hardpoint teeth for long lasting sharpness and a curved, toothed nose for starting cuts in the middle of the workpiece. With screwed one piece, two-component handle. Blade Length: 300mm (12in).Teeth: 11 tpi.
Bahco ProfCut General Purpose fleam-toothed saw with very fine teeth for smooth sawing in a wide variety of materials such as plastics, laminates, wood, chipboard and soft metals like aluminium. Toolbox sized for easy storage. Slim blade and nose for easy access. Screwed one-piece, 2-component plastic handle. Blade Length: 380mm (15in).Teeth: 15 tpi.
Bahco ProfCut Toolbox Hardpoint Saw for medium thick materials such as timber, plywood, fibre and chipboard. Slim blade and nose for easy access. 3-side ground, super sharp GT-toothing for high cutting speed. Has a two-component handle that provides optimum user comfort. Blade Length: 380mm (15in).Teeth: 11 tpi.
Bahco ProfCut Plastic and Foam Saw for cutting polystyrene, foam and stucco. Specially developed, toothing with very fine bevel ground teeth, and gullets designed to combine excellent finish with minimal clogging. Blade Length: 400mm (16in). Teeth: 18 tpi.
Bahco ProfCut Laminator Saw has been specially designed for cutting laminated and wooden flooring. Has a 2-component handle that provides optimum user comfort. The high-quality steel blade is taller and thicker than conventional blades and has fine XT hardpoint toothing, allowing a faster and straighter cut. Blade Length: 500mm (20in).Teeth: 11 tpi.
Bahco Professional Mitre Handsaw for cutting plaster and boards of a wood based material. With a two-component handle which ensures a comfortable and safe grip. Specially developed toothing with new super sharp GT-toothing for the first 100mm (at the tip), followed by groups of four teeth with an extra large gullet between groups for greater efficiency and minimised clogging. Blade Length: 500mm (20in).Teeth: 9 tpi.
