Number punches are for marking metals and other solid materials. Produced from quality steel, heat treated to give maximum endurance and accuracy of impression. Set contains 0-9 with the latter inverted to double up as a 6. Packed in attractive plastic box.Size. 3mm (1/8 in).
The Marshalltown 19 Series Philadelphia Pattern Brick Trowels are one-piece forged from highest carbon steel then heat-treated for strength and durability. The handle rise is set for correct hang and balance. The blade is taper ground and polished. The DuraSoft® handle incorporating an integral finger guard, provides a soft feel, reduces fatigue and offers excellent durability. Philadelphia Pattern trowels are better suited for laying blocks because they allow for more mortar to be placed on the blade.Marshalltown 19D Philadelphia Pattern Brick Trowel Durasoft® Handle 300mm (12in) Size: 300 x 150mm (12 x 6in).
The Wiha Professional electric Needle Nose Pliers are for gripping and holding as well as cutting soft and hard wires, and cables. The extra-long plier head is ideal for inserting low-lying components. With a high-quality, chrome-plated surface to prevent corrosion.Ergonomically shaped plier handles ensures comfortable, fatigue-proof work. Offers you full protection, each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Manufactured according to IEC 60900 and DIN ISO 5749.These Wiha Professional electric Needle Nose Pliers have the following specification: Overall Length: 200mmCutting Capacity (mm): Medium-hard: 3.2, Hard: 2.2, Hardened Spring Steel: 1.6
The Lessmann Brake Caliper Brush, manufactured for the automobile industry and used for the cleaning of clogged lining deposits when changing brake pad linings. The brush is thin with two rows of straight wire filling and is manufactured this way to prevent damage to sensitive brake areas during use. Available in Steel or Brass. Length: 225mm (9in). 182.401: Straight Steel, Gauge: 0.35.182.451: Crimped Brass, Gauge: 0.25.The Lessmann Brake Caliper Brush has the following specification: Type: Steel Straight, Gauge: 0.35.Length: 225mm (9in).
The BlueSpot Straight Cutting Snips are drop forged for increased durability. They have accurately ground cutting blades with a nut and bolt joint design. Feature a handle lock for safe storage.1 x BlueSpot Straight Cut Snips 250mm (10in)
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 225mm (9in)
Thor deadblow hammers have coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces. Available in 5 different weights. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. Thor deadblow hammers are ideal as a multi-purpose striking tool and are ideal for sustained and effective blows without recoil. They are commonly used in most assembly / fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.Replacement faces are available.Diameter 50mm (2 in).Weight 1150g (2 3/4lb).
Markal B Paintstik Markers are solid oil paint in stick form, which combines the long lasting durability of paint with the ease of application of a crayon. For marking any material, surface or texture - rough, smooth, wet, dry, icy, rusty or even oily. These markers dry like regular paint with excellent abrasion resistance and are fade-and-weather resistant, too.Colour:- Blue
The Carver Standard-Duty Rack Clamps have many uses. The most common include welding, metal fabrication, moulding box and die holding, plate fabrication, plastic and fibreglass moulding and maintenance work.The Carver T186-300 Standard-Duty Rack Clamp has the follwoing specifications: Capacity: 500mm (20in).Reach: 60mm (2.3/8in).Overall Length: 640mm (25.1/8in).Clamping Force: 11,300N.Weight: 2.5kg.
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: SecondThread Size: M10
The Roughneck Knocking Block is made from strong nylon and is used for knocking laminate and timber flooring together to ensure a perfect fit. Heavy-duty with a large handle. Large size ensures even pushing and will not damage the wood panels being fitted. Size: ;55 x 480mm.
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: BottomingThread Size: M6
This Teng Steel Ratchet is manufactured from chrome vanadium steel for optimum durability. It is ideal for use in confined spaces, with 72 teeth and 5° increments. Several teeth are engaged simultaneously, which means that a greater force can be used without risk of damage. The ratchet has an improved reverse switch, allowing quick and easy direction change - even with gloves on. The ratchet head is sealed, which prevents dirt and dust entering the mechanism, giving longer life and trouble-free use. The button for quick socket release is level with the ratchet head, which prevents accidental button activation and the loss of the socket. The ergonomic two-component handle provides a firm grip. The ratchet is of very high quality, and can handle torque that exceeds DIN 3112 standards. Specifications: Drive: 3/8 inch.No. of teeth: 72.Length: 203mm.
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.Size: 600 x 53mm (24 x 2.08in).
IRWIN Record 350 Leader Wrench is a heavy-duty wrench extensively used in heavy industry, particularly in the oil and gas fields and in civil engineering. The jaw housing is covered by a free replacement guarantee against breakage or distortionThe IRWIN Record REC35048 Leader Wrench has the following specifications:Length: 1200mm (48 inch).Pipe Capacity Non Bore: 152mm (6 inch).
Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug. The metric set contains: 5, 6, 8, 10, 12.5, 16, 20, 25 and 32mm sizes. The imperial set contains: 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1in sizes.Set contains: 1/4,5/16,3/8,7/16,1/2,5/8,3/4,7/8 and 1 in sizes.
Straight edge for accurate marking out with a carpenters pencil or metal scriber. Accuracy is 0.01% of the length of the straight edge.Size: 1000 x 50mm (39 x 2in).
The RIDGID Inner-Outer Reamers have a hardened steel construction and are suitable for cutting copper and stainless steel tubing. They have 46 cutting edges on the interior cone that allow for fast, clean, inner reaming and outer deburring/bevelling of 1⁄4in (6mm) to 2in (50mm). The reamers have dual inch/metric measurement bars.RIDGID 227S Inner-Outer Reamer Capacity: 12-54mm (1/2 - 2in).Weight: 0.56kg.
The RIDGID Heavy-Duty Pipe Cutter has an extra-long shank that protects the adjustment threads and an extra-large handle for quick, easy adjustment. Provides a fast, clean cut on metallic pipes such as copper. Can be converted to 3-wheel cutter by replacing rollers with cutter wheel. Model 3-S has a second handle making two-man leverage possible on large pipe sizes.RIDGID 2-A Heavy-Duty Pipe Cutter Capacity: 3-50mm (1/8 - 2in).Weight: 3.2kg.
Workpieces with straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines can all be quickly and accurately located with this handy tool. Made of tool steel, hardened, ground and lapped.Description: Double end Body diameter: 10 mm Contact diameter: 6 mm and pointed contact
Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug. The metric set contains: 5, 6, 8, 10, 12.5, 16, 20, 25 and 32mm sizes. The imperial set contains: 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1in sizes.Set contains: 5,6,8,10,12.5,16,20,25 and 32mm sizes.
The Maun Olive Cutter Tool has been designed to quickly remove a compression olive, ring, or ferrule without damaging the copper pipe. Its high-quality steel cutting blades are hardened and tempered to HRC 45. They provide a reliable cut every time, with minimal hand pressure. Multiplies hand force by 15 times for less cutting effort. Its zinc-plated handles are fitted with soft plastic grips for added comfort and feature a reliable return-spring handle action. Ideal for professional plumbers, especially when moving radiators and serious DIYers tackling similar jobs. Comes with a standard 12-month warranty. Register your tool to extend this to 2 years. Made in England. 1 x Maun Olive Cutter Tool 10mm
The RIDGID Heavy-Duty Straight Pipe Wrench has a sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, featuring self cleaning threads with replaceable hook and heel jaws.Specification: Size: 450mm (18in)Pipe capacity: 65mm (2.1/2in)Weight: 2.6kg
The Moore & Wright Protractor Type Depth Gauge has a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are graduated on both sides. Protractor plate is graduated 0º - 180º - 0º.Scale Resolution: 1/2°.The Moore & Wright 44 Protractor Type Depth Gauge Metric/Imperial has the following specifications: Size of Base: 79mm/3.11in.Width: 5.5mm/0.22in.Thickness: 1.0mm/0.04in.Length of Blade: 195mm/7.68in. Metric/Imperial Scale Graduations : Front Face: 1/32nd, Rear Face: 1.0mm.
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in a case.The 1966/2 Traditional External Micrometer has the following specification: Micrometer Range: 1-2in.Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.Resolution: 0.001in.
The Moore & Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The V-shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.
The Moore & Wright Protractor Type Depth Gauge has a full range rule adjustment and the readings can be fixed by means of a locknut. Rules are graduated on both sides. Protractor plate is graduated 0º - 180º - 0º.Scale Resolution: 1/2°.The Moore & Wright 44M Protractor Type Depth Gauge Metric/Imperial has the following specifications: Size of Base: 79mm.Width: 5.5mm.Thickness: 1.0mm.Length of Blade: 195mm. Metric Scale Graduations : Front Face: 0.5mm and 1.0mm, Rear Face: 1.0mm.
The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in plastic pocket case.The 1965M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.001mm.
The Moore & Wright CSM Precision Sets are supplied with a rule (graduated both sides), Protractor head, Square head and Centre head. The datum faces are fully hardened and ground to resist wear. There is a centrally mounted protractor vial allows unrestricted viewing and the protractor has full 360° scale plate, graduated 0° - 180° - 0°. The protractor is also fitted with a satin chrome scale plate. The precision rules have been fully hardened and tempered with deeply etched graduations on both sides for ease of reading and long life. It has a unique rule clamp that allows positive location and clamping and a clipped corner on rule to maximise capability Square Head offers the following fixed angles: 15°, 30°, 45°, 60°, 75° and 90°. Centre Head offers a fixed 90° angle, for finding the centre of round bar stock up to 120mm diameter. MAWCSRM600 & MAWCSRME24 are rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).The Moore & Wright CSME12 Precision Combination Set is a full set including 300mm/12in rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: Metric graduations: in 0.5mm, numbered every 10mm. Imperial graduations: 32nds and 64ths numbered every 1/8in.
The Wiha Professional electric Diagonal Cutters are for cutting cables as well as soft and hard wires. A DynamicJoint ensures hand force is optimally applied when cutting, providing up to 40% greater cutting force.The cutting head has a high-quality, chrome-plated surface to prevent corrosion, ensuring a long service life. Ergonomically shaped plier handles ensures comfortable, fatigue-proof work. Offering you full protection, each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Manufactured according to IEC 60900.These Wiha DynamicJoint Pro electric Diagonal Cutters have the following specifications: Overall Length: 160mm.Max. Cutting Diameter: 2mm.
The Faithfull 1/2in Drive Hex Sockets are forged from Chrome-Vanadium steel, hardened, tempered and satin chrome plated for corrosion protection.Faithfull sockets feature a hexagon design for precise fitting on both nuts and bolts, while the chamfered end facilitates easy nut placement and entry.
1 x Faithfull Hex Socket 1/2in Drive 15mm.
The Faithfull 1/2in Drive Hex Sockets are forged from Chrome-Vanadium steel, hardened, tempered and satin chrome plated for corrosion protection.Faithfull sockets feature a hexagon design for precise fitting on both nuts and bolts, while the chamfered end facilitates easy nut placement and entry.
1 x Faithfull Hex Socket 1/2in Drive 19mm.
These Stanley Trowels have stainless steel blades for rust protection and durability. They have a slight bow in the blade which makes them ideal for drywall joints. Their bi-material handles ensure comfort and protection.Blade size: 320mm x 130mm.
The Woodcraft vice has 150mm (6 in) jaws and it is designed to be mounted underneath the bench so that the top of the jaws are flush with the bench top. Toe-in at the top of jaws ensures firm grip and jaws have provision for attachments of wooden cheeks to protect the workpiece. Accurately aligned steel slides and rolled 2-start acme thread for smooth action. Jaw Opening: 115mm (4 1/2in).
