The Hultafors CC30FME Steel Long Tape has both metric and imperial measurements. Specifications: Blade Length: 30m/100ft.Blade Width: 13mm.Accuracy: EC Class II.
The Hultafors EFK Electrical Fitter's Knife has a thin blade made from Japanese knife steel. The 1.5mm carbon steel has been hardened to 58–60 HRC. It has been optimised for cable stripping, with a sharp blade edge and a unique handle design. Supplied with a holster that can be attached around a button on your work clothes so that it does not come loose whilst still being easy to remove. Both the handle and holster are made from super-durable PP plastic. Blade Length: 35mm.Overall Length: 160mm.This Hultafors EFK Electrical Fitter's Knife is supplied loose.
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 300mm (12 in)
The T Block Combi Hammer is an ergonomically designed hammer that increases precision and reduces strain. The head is filled with small steel bearings to cushion the shock and reduce recoil, the shaft is made from steel with an ergonomically designed rubber grip. The counterweight in the handle impedes rotation, thus improving balance and control of the hammer.1 x Hultafors Medium T Block Combi Deadblow Hammer 350g (0.7lb)
Square mouthed open socket shovel pressed from high quality steel and fitted with a 700mm (28in) graded wooden shaft with a metal YD hilt. The socket is polished for comfort in use. Weatherproofed handle.Size No 2Blade size 300 x 250mm (12 x 10 in).Shaft: 700mm (28in).
The Knipex 74 02 range of diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 21% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 02 series comes in 160, 180, 200 and 250mm versions with Comfort grip handles for added comfort and a better grip. The 74 02 series pliers are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most of the Knipex range of nippers and cutters the 74 02 range of diagonal pliers are oil hardened and tempered for longer life with cutting edges separately induction-hardened to approx. 64hrc.Length 250mm (10 in) Capacity:Medium Hard Wire: 4.60 mm.Hard Wire: 3.5 mm.Piano Wire: 3.0 mm.
The Knipex 74 02 range of diagonal pliers have high leverage with fixed, forged-on articulated axle for heavy-duty applications, so requiring 21% less effort for cutting, improving performance and reducing fatigue on all work applications. Knipex 74 02 series comes in 160, 180, 200 and 250mm versions with Comfort grip handles for added comfort and a better grip. The 74 02 series pliers are ideal for soft or hard wire, including piano wire, ranging from 2.0mm up to 3.00mm across the range sizes. The strong durable edges make an easy and clean cut, with long lasting results even under the toughest conditions. Like most of the Knipex range of nippers and cutters the 74 02 range of diagonal pliers are oil hardened and tempered for longer life with cutting edges separately induction-hardened to approx. 64hrc.Length: 200mm (8 in).Cutting Capacity: Med/hard wire: 4.2 mm.Hard wire: 3.0 mm.Piano wire: 2.5 mm.Length: 200 mm.
The Knipex Concrete Mesh Cutters have blades made from chrome vanadium, forged, oil-hardened, heavy-duty steel and have robust cutting edges that are additionally induction hardened to approx. 62 HRC. The handles are constructed from powder-coated steel tube and fitted with sturdy non-slip two-colour dual component handle sleeves. The ergonomically angled handles minimise user effort and there is a forged-in stopper with comfortable shock-absorber for increased user comfort. The cutters offer a high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Flat construction in the head and joint area provides increased access even in tight paces. An eccentric bolt provides precise adjustment of the cutter with 12 positions. A special, forged tool steel is used in the joints of the cutters and the bolted cutter head is replaceable. Specification Cutting Capacity: HRC 19: 11mm, HRC 40: 9mm and HRC 48: 6mm. Length: 950mm.Weight: 4.06kg.
This Knipex 95 31 Series cable shears with 2 component, soft-grip handles. Perfect for copper and aluminium cables, single and multiple wires. Cuts smoothly and cleanly without crushing. Sharp hardened precision knives. Short design with safety guard. Not suitable for wire cables or steel wire. One hand operation using ratchet principle, means little power is required due to optimum transmission ratio. Two stage ratchet drive for easy cutting. Special grade tool steel. Fixed handle with support area for putting down the plier when cutting.1 x Cable Shears Ratchet Action Multi Component Grip 280mm (11in)
The Knipex 86 03 Series Pliers Wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power. 86 03 125: 11 Adjustments, Capacity: 23mm.86 03 150: 14 Adjustments, Capacity: 27mm. 86 03 180: 13 Adjustments, Capacity: 35mm.86 03 250: 17 Adjustments, Capacity: 46mm.86 03 300: 22 Adjustments, Capacity: 60mm.The Knipex 86 03 125 Mini Plier Wrench is ideal for precision mechanics, particularly suitable for working on small bolted connections. Thier mini size makes them very good in very confined areas. They are made from Chrome vanadium, forged, oil-hardened electric steel. Lever transmission is greater than 10 : 1 for strong gripping power. Combines pliers and a wrench in a single tool and replaces the need for sets of metric and imperial spanners. Fitted with smooth jaws for damage free installation of plated fittings, allowing you to work directly on chrome. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. It is an adjustable tightening tool that is also excellent for gripping, holding, pressing and bending workpieces. The zero backlash jaw pressure prevents damage to edges of sensitive components. It has parallel jaws that give a more solid grip. Its design allows flexible adjustment of all widths up to the specified maximum size. Length: 125mm.Capacity: 23mm (7/8in).
The Knipex 02 01 range of combination pliers have high leverage with the added eccentric joint for powerful gripping and seizing. With 50% easier cutting ability on all work applications, the 02 01 come in 180 and 200mm versions with soft cusion grip handles for added comfort and a better grip. The 02 01 series are ideal for soft, hard and even piano wire cutting. The strong durable edges will make an easy and clean cut, with long lasting results even under the toughest conditions. Like most the Knipex range of nippers and cutters the 02 01 range are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc. Cutting Capacity: 02 01 180: Piano: 2.0mm, Hard: 2.5mm.02 01 200: Piano: 2.2mm, Hard: 2.8mm.These Knipex ;High Leverage Combination Pliers ;have the following specification: Length: 200mm (8in).Cutting ;Capacity: Piano: 2.0mm, Hard: 2.5mm.
The Knipex Mini Plier Set comes in a high quality polyester pouch with hook-and-loop fastener and belt clip. Contains: 1 x 87 01 150 KNIPEX Cobra High-Tech Water Pump Pliers. With push button for adjustment on the workpiece. It offers fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. The gripping surfaces feature special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Its box-joint design allows for high stability due to double guide. With reliable catching of the hinge bolt: no unintentional shifting. A pinch guard prevents operators' fingers being pinched. Length: 150mm. Capacity: Pipe 36mm Ø, Nuts 32mm. 1 x 74 01 160 KNIPEX High Leverage Diagonal Cutters for very tough, continuous use. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio.Its precision cutting edges are additionally induction-hardened (cutting edge hardness approx. 64 HRC), making them suitable for all sorts of wire including piano wire. Length: 160mm. Cutting Capacity: Hard Wire 3.4mm, Piano Wire: 2.0mm.
Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX001957 tool roll is equipped with 4 common circlip pliers for internal and external circlips suitable for the highest requirements in all trade and DIY applications. The set contains: 1 x 48 11 J1 Internal: Bore: 12-25mm, Length: 140mm. 1 x 48 11 J2 Internal: Bore: 19-60mm, Length: 180mm. 1 x 49 11 A1 External: Bore: 10-25mm, Length: 140mm. 1 x 49 11 A2 External: Bore: 19-60mm, Length: 180mm.
Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip.The Knipex 46 31 series of internal bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45° bent tips.Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip.Size 180mmBore size 19-60mm
The Knipex 95 32 320 Cable Cutters have multi-component, soft grip handles that are lightweight and compact. Ideal for cutting up to 60mm diameter copper and aluminium cables, and for multiple stranded cable. Not suitable for steel wire or wire ropes. The innovative three-stage ratchet-drive ensures high leverage for easy cutting in one-handed and two-handed operation. The steel cutting edges are hardened and precisely ground, ensuring a smooth, neat cut without crushing. They have a fixed handle with a support area and they are ideal for use in confined areas. Specification Length: 320mm.Cutting Capacity: 60mm.
Pack of 3 Knipex 86 09 180 V01 Protective Jaws. Suitable for all 86 XX 180 models (models from 2019). The Knipex Protective Jaws enable the use of a pliers wrench on designer fittings and other highly sensitive materials, thanks to the soft, smooth gripping surfaces. They can also be used on chrome if the jaws of the pliers wrench have been damaged due to improper or rough use. Easy to fit and firmly hold in place. 180mm
The Knipex 82 01 TwinGrip Front and Side Gripping Pliers are ideal for gripping, tightening and loosening screws with worn heads and threads. The three-way adjustable slip joint with push button adjustment allows for precise alteration of gripping capacity.The jaw features a high-grip front with robust teeth and high gear ratio at the tip of the mouth. The side jaw design also features optimised geometry with locking effect for maximum grip when loosening and tightening.Fitted with plastic coated handles for added comfort. They have a very slim design and will work in confined spaces thanks to the slim turning zone for fast screwing. A pinch stop reduces the risk of crushed fingers.
These Knipex 82 01 250 TwinGrip Front and Side Gripping Pliers have the following specifications:Length: 250mm.For Diameters and Width Across Flats: 5-27mm.Max. Frontal Gripping: 10mm.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. These regular 6-point metric impact sockets have a 3/4 in square drive, and have a locking pin and retaining ring facility.The TEN940530 Impact Socket has the following specifications:Size: 30mm.Length: 52mm.
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 5.5mm
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 22mmLength: 38mm
A professional 3/8 in drive regular 6 point AF socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety.Manufactured from chrome vanadium steel with a satin finish.Size: 9/16 AFOverall length 25.7mm
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940630 Impact Socket has the following specifications: Length: 95mm.Size: 30mm.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. These regular 6-point metric impact sockets have a 3/4 in square drive, and have a locking pin and retaining ring facility.The TEN940546 Impact Socket has the following specifications:Size: 46mm. Length: 63mm.
The Pony Jorgensen Heavy-Duty E-Z HOLD Adjustable Clamps allow for rapid and easy clamping. They can also be easily be converted to spreader clamps. The contoured comfort grip and quick-release lever make it simple to get a firm grasp, and our exclusive patented feature lets you join two clamps together to create a clamp with more than double the opening capacity of a single clamp. Deep-reach pads help protect your work for any marks or scuffs when using. Specifications: Reach: 3 3/8in.Load Limit: 600 lbs. 1 x Pony Jorgensen Heavy Duty E-Z HOLD Adjustable Bar Clamp 24in.
Marshalltown Brick Trowels are manufactured from a single piece of high grade tool steel. These trowels have been re-engineered and are produced on the most modern forging equipment available. The blades are expertly ground from heel to toe and are London Pattern with a wooden or Durasoft handle and polished steel ferrule. The impact area is strong to provide extra endurance, the flexibility produces the unique feel of Marshalltown brick trowels.London Pattern with wooden handle.Size. 300 x 133mm (12 x 5 1/4 in).
The Marshalltown MXS205GD Finishing Trowel is made from Golden Stainless Steel and has the highest grade hardened and tempered blade, that has been properly shaped. It is fitted with an Aluminium Alloy Xtralite mounting that is lightweight and very strong. The bevelled work edges prevent surface aggregate popping. It is fitted with a resilient DuraSoft® handle that provides a soft feel, reduces fatigue, and offers excellent durability.
Marshalltown Finishing Trowels, whether for concrete or plaster, are crafted from the highest quality materials using the best design standards, blades are cross-ground to hold their shape.The aluminium alloy mountings are fully heat treated for strength, they are polished and machine-finished to ensure a perfect handle-to-post-fit. The exclusive Diamond Shank fits exactly into the square hole of the bass wood handle to eliminate turn. Hardened steel rivets properly sized and computer fitted for added strength are used to attach the blade to the mounting. Since Marshalltown Trowels are not welded, there is no embrittlement problem to cause premature breaking.The extra large toe rivet adds additional strength at this point.Handle Curved WoodSize. 460 x 115mm (18 x 4 1/2 in).
Marshalltown MXS series Plasterers finishing trowels have an aluminium alloy mounting and are very light, but as strong as steel. The flexible blade is of the highest grade spring steel, tempered, ground and polished and the blade is fastened to the mounting with ten hard steel rivets. The curved wooden handle is held firmly by a nut and washer.Plasterer's shaped wood handle.Size 300 x 125mm (12 x 5 in).
Marshalltown MXS series Plasterers finishing trowels have an aluminium alloy mounting and are very light, but as strong as steel. The flexible blade is of the highest grade spring steel, tempered, ground and polished and the blade is fastened to the mounting with ten hard steel rivets. The curved wooden handle is held firmly by a nut and washer.Plasterer's shaped wood handle.Size. 280 x 115mm (11 x 4 1/2 in).
MXS Cement trowel designed with the balance, flexibility and toughness required for finishing cement. Fitted with a resilient DuraSoft® handle that provides a soft feel, reduces fatigue, and offers excellent durability. Highest grade spring stainless steel blade, properly shaped and tempered. Lightweight aluminium mounting which is as strong as steel. The blade is made from stainless steel which is easier to clean. These trowels do not corrode and are therefore much longer lasting.DuraSoft® Handle Size: 460 x 120mm (18 x 4.1/2in).
Marshalltown PermaShape® Finishing Gold Stainless Steel Trowel pre-worn finishing trowel with broken-in shape to eliminate line and ripple marks. They withstand the pressure of hard-trowelling and are made from the highest grade stainless steel, properly shaped and tempered to a golden finish. With a resilient DuraSoft® handle which provides a soft feel, reduces fatigue and offers excellent durability.Marshalltown MPB7GSD PermaShape® Finishing Gold Stainless Steel Trowel Size: 300 x 125mm (12 x 5in).
The Stabila BM 100 Compact Pocket Tape has a shatterproof ABS housing with a shock-absorbent soft grip casing and an integrated eyelet for attaching an anti-drop wrist strap. Ergonomically shaped for easy use. Its blade features hard-wearing paint that protects the scales from damage. The yellow coating ensures good readability, even in sunlight, with red tens for quick orientation and reading. A movable start hook with an integrated eyelet to prevent slippage allows for accurate measurements. The start of the blade is strengthened with a metal plate to prevent wear. Fitted with a push brake for stopping and locking the tape securely and a chrome-plated metal clip for easy belt attachment.This Stabila BM 100 Compact Pocket Tape has metric and imperial measurements. Blade Length: 3m/10ft Blade Width: 19mmAccuracy: EC Class II
Faithfull Letter punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered. Each set contains twenty seven punches with the characters & and A to Z.Set supplied in plastic box.Size : 5mm (3/16 in).
