The Wiha Stripping Tool comes with a self-turning inner blade which automatically adjusts from round to longitudinal cutting. An adjusting screw provides a variable cutting depth for convenient stripping of all common round cable from 4-28mm in diameter.The self-tensioning retaining clip ensures safe cable guidance, which at the same time guarantees the user's safety as a permanent cover for the blade. During application, the stripping tool lies perfectly in your hand at all times thanks to the large handle size. The tool handle also contains a spare blade. Specifications: Overall Length: 130mm.Area Stripped (Min.-Max.): 4-28mm.
The Wiha Stripping and Assembly Tool offers the user all the necessary functions required for processing a coaxial cable with F-screw connector in one compact tool.Precisely fitting and stripping of coaxial cables with an outer diameter of 6 to 8mm can be carried out in just one work step. The stripping is performed quickly and in a space-saving manner by means of multiple rotary movements using two pairs of blades positioned opposite each other.The already adjusted stripping dimension is designed for common F-screw connectors. In the next step, the integrated gripping jaws can be used to screw F-connectors onto the already stripped cable.Then the open hexagon SW11 ensures easy assembly or disassembly of the F-connector. The hexagon offers very good accessibility and is easy to operate, especially in confined work environments.For safe and space-saving storage, the tool can be locked in a closed position by means of a slide. Specifications: Overall Length: 125mm.Area Stripped (Min.-Max.): 6-8mm.Hex Head: 11.0.
The Wiha Voltage Detector, Explosion Protected is used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight.With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1 / IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
The Wiha speedE II electric E-screwdriver is ideal for all screw-fastening tasks. Several fastenings per day, hundreds of fastenings per week. Professional craftspeople invest a great amount of time and energy in recurring fastening tasks. The resulting pain in wrists is the body’s natural reaction. Thanks to the electric drive of the e-screwdriver speedE II, joints and tendons are protected, especially during continuous use. In addition the required time is reduced to one-third.An extra highlight of the speedE II is the integrated material function. Sensitive fastenings, for example, plastic socket covers, must not be tightened too hard or the material will be damaged. In such cases, the speedE II automatically switches off at 0.4Nm and gives the user full control to carefully carry out the final fastening by hand. If there are fastening tasks requiring more force, the second generation speedE offers the option of increasing the electric force to 1.0Nm via a sliding switch.The colour of the slimBits serves as an aid for adjusting the correct force level to the respective application. Red slimBits with the smaller profiles are used in the red slide position, while the yellow Power SlimBits with the larger profiles indicate in this case, the more powerful yellow slide position can be used. If more force is required, the speedE can be manually used up to 12Nm without incurring any damage.The enlarged ring switch and smooth rotation ensure even easier handling. Thanks to the combination of facilitated handling and the ergonomic SoftFinish handle design, the e-screwdriver speedE II is recommended by doctors and therapists from the German Campaign for Healthier Backs. During the fastening, the integrated LED light provides permanent illumination for an optimal view of the screw. The powerful LED can also be used as a flashlight by tapping on the ring switch. slimBits are individually tested at 10,000 V AC and approved for 1,000 V AC. Supplied with: 1 x slimBit electric Slotted/Pozidriv Power Bit SL/PZ2 x 75mm.1 x slimBit electric Slotted Bit 3.5 x 75mm.2 x Li-ion Batteries.1 x Li-ion Charger with USB.1 x Mini L Boxx.
The Wiha eMobility Voltage and Continuity Tester ensures electrical isolation. It is suitable for voltage testing, flow testing and rotational field testing. Also suitable for testing hybrid and electric vehicles as well as photovoltaic systems.The illuminated LED display shows present voltage on an 8-level scale, as well as 'the' actual value. It additionally offers the option of single-pole phase testing, optical rotational field display, as well as automatic polarity recognition.An integrated spacer makes quick one-handed testing possible. Whilst measuring point illumination makes it ideal for work in poorly lit working environments. For additional safety, a low battery charge is indicated directly on the LC display. Complaint with the standards EN 61010-1 and EN 61243-3:2014. Specifications: Min. - Max. Voltage (AC/DC): 12-1,000/12-1,500V.Contamination Level: 2.Protection Class: IP 64.Operating Temperature: -15 degreeC - 40 degreeC.Power: 2 x AAA Batteries (supplied).
The Wiha FibreBuzz Soft-Faced Hammer for the controlled positioning and joining of work pieces. The soft-faced hammer dead-blow allows the user to deliver measured positioning blows, protecting delicate surfaces and edges through its high-impact effect. A special metal ball filling in the hammer head helps the soft-faced hammer to work completely without recoil and in a way' which is easy on the joints.Fitted with a high-quality, plastic fibreglass handle that is lightweight and an almost unbreakable. The non-slip, ergonomically shaped multi-component grip ensures a tight and secure grip that guarantees full control even when used with oily or wet hands. Integrated impact protection safeguards the work piece as well as the hammer from damage.In addition, the powerful connection between the hammer head and handle ensures greatest safety while working and the shatter-proof nylon heads can be independently replaced at any time. GS standard according to DIN 5134. Specifications: Hammer Face Diameter: 40mm.Hammer Head Height: 120mm.Overall Length: 320mm.Weight: 740g.
This Wiha Automatic Stripping Tool is made for precise and safe stripping of cables up to 6mm². Can also be used to cut Cu and Al leads with a diameter of up to 2mm. These lightweight pliers ensure quick and precise skinning thanks to an integrated scanning system which adjusts automatically to the respective lead cross section, effectively preventing damage to the interior lead.In addition, the leads can be custom stripped with the adjustable length arrester from 5-12mm. If needed, the length arrester can also be entirely removed from the tool. The blades of the stripping tool are made of high-quality sturdy cutlery steel and can be replaced, if required. Space-saving and secure locking is ensured by the arrest option on the tool. Specifications: Overall Length: 190mm.Cross Section Area Stripped (Min. - Max.): 0.2-6mm².Area Stripped: 24-10 AWG.
The Wiha Stripping Tool comes with a rounded tool head and elongated ergonomic handle shape. The stripping tool fits perfectly into your hand, offering increased comfort even in difficult to access work areas. Designed for flush stripping of round and moisture proof cables with diameters 6-13mm (e.g. NYM 3 x 1.5mm² to 5 x 2.5mm²) without the need for setting the cutting depth manually in advance.The length arrester has been integrated into the housing this supports particularly precise working when processing series with the same stepped dimensions. A fastening clip ensures safe storage and prevents damage to the tool. Specifications: Overall Length: 140mm.Area Stripped (Min.-Max. Ø): 6-13mm.
The Wiha Ring Ratchet Spanner Set, 12 Piece, is made from high-quality, chrome vanadium steel with a corrosion-resistant and easy-to-clean surface. The design enables high leverage without force, making it easy to open any screw connection. In addition, the end with the mouth is ideal for countering screws and nuts. With a jaw position of 15 degree, the jaw end is perfect for working in narrow spaces.Even when working with the ring ratchet, the user has a short return angle thanks to the fine toothing with 72 teeth and maximum comfort when working in cramped working environments thanks to the double hexagon. Conforms to DIN 3113. This 12 Piece set is supplied in a practical holder. The holder can be opened with just one hand in order to remove the right size from it. Its non-slip surface helps to ensure a strong hold even in oily or wet work situations. Contains the following sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm.
This Wiha Digital Multimeter equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible.A large LCD display with background illumination and data hold function makes the measurement results immediately readable. The additional bar graph display ensures the quick and clear recognition of changes. An additional signal sound indicates the current flow during the continuity check.Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. Measurement of TRUE-RMS values facilitates the application of the measurement results.The storage of previous measurement values and their comparison to future measurement results allows various control options. Add to this optimal result finding through the generation of minimum and maximum values.According to the measurement categories CAT III up to 1000 V AC and CAT IV up to 600 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations. Confroms to EN 61010-1, EN 61010-2-033, EN 61010-031, IP40, CE CAT III 1000V / CAT IV 600V Standards. Specifications: Current (AC/DC): 10 A/10 A.Min. - Max. Voltage (AC/DC): 0-1,000V/0-1,000V.Resistance: 200 MΩ.Frequency: 60 MHz.Temperature Measurement: -200 degreeC to 1,350 degreeC.Contamination Level: 2.Protection Class: IP 40.Operating Temperature: 0 degreeC - 50 degreeC.Capacity: 60 mF.Power: 2 x AAA Batteries (supplied).
The Wiha Voltage and Continuity Tester is made for standardised voltage testing, continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection.The LED display ensures easy to read measurement results. An additional signal sound indicates the current flow during the continuity check. A check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load.It also has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for people working on building installation and directly on the sources of low-voltage installations. Complaint with the standards IEC 61243-3:2014, IP64, CE CAT II 1.000V / CAT IV 600V. Specifications: Voltage V AC (min. – max.): 12-1,000V.Voltage V DC (min. – max.): 12-1,500V.Single-pole Phase Test: 100 - 700 V AC.Protection Class: IP 64.Operating Temperature: -15 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
This Wiha Digital Multimeter equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible.A large LCD display makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. The storage of previous measurement values and their comparison to future measurement results allows a variety of control options.According to the measurement categories CAT III up to 600 V and CAT IV up to 300 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations. Conforms to EN 61010-1, EN 61010-2-033, EN 61010-031, IP 40, CE, GS CAT III 600V / CAT IV 300V Standards. Specifications: Current (AC/DC): 10 A/10 A.Min. - Max. Voltage (AC/DC): 0-1,000V/0-1,000V.Resistance: 200 MΩ.Frequency: 60 MHz.Temperature Measurement: -200 degreeC to 1,350 degreeC.Contamination Level: 2.Protection Class: IP 40.Operating Temperature: 0 degreeC - 50 degreeC.Capacity: 60 mF.Power: 2 x AAA Batteries (supplied).
The Wiha Clamp Meter can be used to carry out measurements without interrupting the electrical circuit. Tests: voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests.A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check.Handling is greatly facilitated by the remote single-hand testing. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations. Conforms to IP40 CAT IV 1.000 V Standards. Specifications: Current (AC/DC): 400 A/400 A.Min. - Max. Voltage (AC/DC): 0-1,500V/0-1,500V.Resistance: 40 MΩ.Frequency: 5 MHz.Power: 2 x AAA Batteries (supplied).
This Wiha Rotational Field Indicator comes with an integrated phase display. The rotation direction as well as the live phases are reliably indentified with the help of an LED display. A crocodile clip included with the delivery allows a simple connection, e.g. with a motor terminal board.In combination with the included test tips, the rotation indicator from Wiha offers great testing flexibility. The rotational field indicator works with the mains voltage itself, so no batteries are required.According to the measurement category CAT III up to 1,000 V and CAT IV up to 600 V the rotation indicator offers maximum safety for working directly on the source of low voltage installations. Confroms to IEC/EN 61010-1, IEC/EN 61577-7, IEC/EN 611010-031, IP40 CAT IV 600V Standards. Specifications: Current Input: 3,5 mA.Min. - Max. Voltage (AC/DC): 100-700V/100-700V.Max. Input Voltage per phase (Lx) against neutral (N): 400V.Operating Temperature: 0 degreeC - 40 degreeC.Protection Class: IP 40.
The Wiha PocketMax Magnetic Screwdriver is the compact alternative to a set of screwdrivers. It conveniently fits into any shirt or pants pocket, the ideal companion for every professional. A magnetic bit chuck ensures convenient and quick bit change.The bit depot is securely stowed in the handle and includes eight standard 25mm bits can be used manually and with machine operation. Thanks to a magnetic shut function, the bit depot can very easily be opened to remove the bits. During closing, the bit depot smoothly and easily glides back into the shaft and practically closes by itself thanks to the magnet. Its twistable cap ensures convenient handling. Supplied with the following: 2 x 25mm Standard Slotted Bits: 4.5 & 6.5mm. 2 x 25mm Standard Phillips Bits: PH1 & PH2. 2 x 25mm Standard Pozidriv Bits: PZ1 & PZ2. 2 x 25mm Standard TORX Bits:T15 & T20.
The Wiha SoftFinish electric slimFix Phillips Screwdrivers comes with a high quality Chrome vanadium steel blade, through hardened with a black-finish. Insulation is moulded directly onto blade. Individually tested at 10,000 V AC and approved for 1,000 V AC.Patented SoftFinish handle ensures work is kind to hands and muscles. Recommended by doctors and therapists at the German Campaign for Healthier Backs. slimFix handles have been specially developed for electric applications, blades are up to 33% slimmer. The unique Wiha handle-length concept provides optimum balance of torque and control. Manufactured according to IEC 60900.1 x Wiha SoftFinish electric slimFix Screwdriver Phillips PH2 x 100mm.
The Blue Spot Tools Impact Spline Bits are manufactured from S2 Steel for increased durability and strength. This set includes the most widely used spline sizes and are ideal for removing and applying spline fittings. The bits are heat-treated, hardened and tempered. They can be used with ratchets, breaker bars and air tools. This 9 piece set includes the following sizes: M6, M8, M9, M10, M12, M14, M16 and M18.
The Blue Spot Tools Impact TORX Bits are manufactured from S2 Steel for increased durability and strength. This set includes the most widely used spline sizes and are ideal for removing and applying TORX fittings. The bits are heat-treated, hardened and tempered. They can be used with ratchets, breaker bars and air tools. This 9 piece set inculdes the following sizes: T30, T40, T45, T47, T50, T55, T60 and T70.
The BlueSpot Tools 1/2in Hex & 12 Point Socket Set. Manufactured from chrome vanadium for increased durability. Knurled sockets to provide a secure grip. This set includes a wide selection of hex and 12 point sockets in most popular sizes. Contains: 19 x Hex Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30 and 32mm. 6 x 12 Point Sockets: 10, 12, 14, 15, 17 and 19mm. 2 x Plug Sockets: 16 and 21mm. 1 x 5in Extension Bar. 1 x 10in Extension Bar with 3/8in x 1/2in Adaptor. 1 x Universal Joint. 1 x 72 Tooth Ratchet. 1 x Sturdy Plastic Case with metal clips for quick and convenient storage.
The BlueSpot Tools 1/2in & 1/4in Metric Socket Set. Manufactured from chrome vanadium for increased durability. Knurled sockets to provide a secure grip. Supplied in a sturdy plastic case with metal clips for quick and convenient storage. Contains: 18 x 1/2in Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30 and 32mm.4 x 1/2in Deep Wall Sockets: 14, 15, 17 and 19mm.2 x 1/2in Spark Plug Sockets: 16 and 21mm. 1 x 1/2in Quick Release Ratchet Handle.2 x 1/2in Extension Bars: 5in and 10in.1 x 1/2in Three Way Adaptor.1 x 1/2in Universal Joint.1 x Coupler 1/2in x 5/16in (8mm). 13 x 1/4in Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm. 8 x 1/4in Deep Wall Sockets: 6, 7, 8, 9, 10, 11, 12 and 13mm. 1 x 1/4in Quick Release Ratchet Handle.2 x 1/4in Extension Bar: 2in and 4in.1 x 1/4in Sliding T Bar.1 x 1/4in Spinner Handle.1 x 1/4in Universal Joint.1 x 1/4in Flexible Extension Bar 150mm. 2 x 30mm Phillips Bits: PH3 and PH4.2 x 30mm Pozi Bits: PZ3 and PZ4.4 x 30mm TORX Bits: T40, T45, T50 and T55.4 x 30mm Hex Bits: 8, 10, 12 and 14mm.3 x 30mm Slotted Bits: 8, 10 and 12mm. 1 x 30mm Bit Adaptor. 2 x 1/4in Phillips Bit Sockets: PH1 and PH2.2 x 1/4in Pozi Bit Sockets: PZ1 and PZ2.6 x 1/4in TORX Bit Sockets: T8, T10, T15, T20, T25 and T30.4 x 1/4in Hex Bit Sockets: 3, 4, 5 and 6.3 x 1/4in Slotted Bit Sockets: SL4, SL5.5 and SL7. 3 x Hex Key Wrenches: 1.5, 2 and 2.5mm.
The BlueSpot Tools 1/2in, 3/8in & 1/4in Metric Socket Set. Manufactured from chrome vanadium for increased durability. Knurled sockets to provide a secure grip. Supplied in a sturdy plastic case with metal clips for quick and convenient storage. Contains: 10 x 1/4in Hex Metric Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12 and 13mm.10 x 1/4in Hex SAE Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 and 1/2in.4 x 1/4in Deep Wall Sockets: 8, 9, 10 and 11mm. 1 x 1/4in Extension Bar 2in.1 x 1/4in Universal Joint.1 x 1/4in Coupler.1 x 1/4in Spinner Handle.1 x 1/4in Quick Release Ratchet Handle. 7 x 25mm TORX Bits: T10, T15, T20, T25, T27, T30 and T40. 11 x 3/8in Hex Metric Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm.9 x 3/8in Hex SAE Sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 and 7/8in.4 x 3/8in Deep Wall Sockets: 13, 14, 15 and 17mm.8 x 3/8in E-Sockets: E8, E10, E11, E12, E14, E16, E18 and E20.2 x 3/8inSpark Plug Sockets: 16 and 21mm. 2 x 3/8in Extention Bars: 3in and 6in.1 x 3/8in Universal Joint.1 x 3/8in Quick Release Ratchet Handle (72 Tooth). 2 x 3/8in Philips Bit Sockets: PH1 and PH2.2 x 3/8in Pozi Bit Sockets: PZ1 and PZ2.7 x 3/8in TORX Bit Sockets: T20, T30, T40, T45, T50, T55 and T60.4 x 3/8in Hex Bit Sockets: H3, H4, H5 and H6.2 x 3/8in SlottedBit Sockets:5.5 and 6.5mm. 7 x 1/2in Hex Metric Sockets: 20, 21, 22, 24, 27, 30 and 32mm.4 x 1/2in Hex SAE Sockets: 15/16, 1, 1-1/16 and 1-1/4in.4 x 1/2in Impact Sockets: 17, 19, 21 and 23mm. 2 x 1/2in Extension Bars: 5in and 10in.1 x 1/2in Universal Joint.1 x 1/2in Quick Release Ratchet Handle (72 Tooth). 10 x Combination Spanners: 8, 9, 10, 11, 12, 13, 14, 17, 18 and 19mm.
The BlueSpot Tools External Chamfer/Deburring Tool is used to clean and repair the thread of damaged threads and studs between 3-19mm. The blades are manufactured from Tungsten Carbide which is extremely hard wearing and has a very high melting point (2,600°) making it ideal for cleaning threads and studs. For use on stainless steel, hardened steel, mild steel, copper, brass, fibreglass, hard plastic and more. Ideal for use with electric drills. Specifications: Shank: 1/4in Hex.Chamfer Angle: 50° (approx.)
BlueSpot Tools Impact Adaptors are manufactured from chrome vanadium for increased durability with a blackened phosphate coating which offers protection against corrosion damage. The spring ball socket retainer ensures a secure fit. Sizes: 3/4in F x 1/2in M, 1/2in F x 3/8in M and 3/8in F x 1/4in M.
The BlueSpot Tools Brick Jointer is manufactured from A3 steel for increased durability. It's double ended shape allows for easy application. Suitable for finishing horizontal and vertical joints. Specifications: Joint Sizes: 1/2in and 5/8in.Length: 310mm.
The BlueSpot Tools White Rubber Mallet with wooden handle. Its high quality rubber head is ideal for applications where a metal head would be unsuitable. The rubber head ensures minimal rebound after blows. Ideal for trade and diy users.
The BlueSpot Tools Waterpump Pliers are manufactured from heat treated chrome vanadium for increased durability. They have a quick press and slide mechanism and serrated jaws for increased grip. Specifications: Overall Length: 400mm (16in).Max. Jaw Opening: 90mm.
The BlueSpot Tools Telescopic Pick up Tool with a high-strength magnet for a secure hold. Fitted with a soft grip handle for increased comfort. It also features a pocket clip for convenient carrying. Specifications: Length: 180mm to 770mm.Max. Magnetic Lift: 7.5kg (16lb).
The BlueSpot Tools Large Inspection Mirror with 360° rotation for easy adjustment and an all-round view. The mirror is mounted on twin ball joints for easy adjusting and positioning. Designed for inspecting underbody elements of vehicles and cavity spaces. Specification: Length: 280mm to 880mm.Mirror Diameter: 85mm.
This BlueSpot Tools Set includes: 1 x Telescopic Inspection Mirror with 360° rotation for easy adjustment and an all round view. Extends from 195mm to 540mm. 1 x Telescopic Pickup Tool witha high strength magnet for a secure hold. Maximum magnetic lift on the inspection tool: 1.3kg (3lb). The pick up tool extends from 145mm to 560mm.
The Bahco Wide Jaw Adjustable Wrench combines 2 tools into 1 convenient everyday tool which can be used wherever valves are adjusted for flow and pressure. Made from high-performance alloy steel, forged in single piece. With a phosphate finish, precision-hardened and anti-corrosion treated. The extra wide jaw features a laser scale in mm for pre-adjusting and accurate measurement. Its slim design and short handle increase accessibility, ideal when working in confined spaces. There is also a tether hole added to secure the tool when working at height and a left-going screw. Conforms to ISO 6787, DIN 3117, ASME B107.8-2003 and BS 6333 standards. Specifications: Overall Length: 254.5mm.Jaw Capacity: 46mm.Hook Opening: 22.3mm.
