The Arctic Hayes Smoke-Sticks™ Kit is the first product on the market offering a pencil thin smoke pattern. The smoke is non-corrosive and not harmful. Ideal for testing for the slightest air-movement, gas spillage. Also for mandatory CO spillage checks of boiler/case sills after fitting/re-fitting and HVAC air-movement/leakage checks. The Smoke-Sticks™ Kit comes with 3 Smoke-Sticks™ providing up to 3 hours of controllable smoke. Refill pack also available.The Arctic Hayes Smoke-Sticks™ Kit comes with: 1 x Smoke-Pen3 x Smoke-Sticks™
Bahco ProfCut Hardpoint Block Saw is a block saw with extra large hardpoint teeth for sawing lightweight cellular concrete blocks. Has a two-component handle which ensures a comfortable and safe grip. Length: 650mm (26in).Teeth: 2 tpi.
The Bahco SL24 1/4in drive Socket Set contains sockets made from high performance alloy steel with a matt finish. The set is supplied in a High Density Polythene (HDPE) case. Conforms to ISO 1174 and DIN 3120 standards. Contents: 1 x Quick Release, Extra Narrow Head Ratchet 72 teeth 5° action angle.1 x Locking Socket Bit 1/4in x 1/4in.6 x Hex sockets: 4, 5, 6, 7, 8 & 10mm.2 x Slotted Bits: 4 & 5mm.3 x Phillips Bits : PH1, PH2 & PH3.2 x Hex Bits: 4 & 5mm.4 x 1/4in TORX® Bits: TX10, TX15, TX20 & TX25.3 x Pozidriv Bits: PZ1, PZ2 & PZ3.1 x Smooth Operation Universal Joint.1 x 100mm Locking Extension Bar.1 x High Density Plastic Case.
The Stanley Sweetheart chisels are based on the original 750 series socket chisels. Designed for striking and paring, the hardwood handle provides a comfortable feel that transfers energy effectively when struck by a mallet. It also provides a wide butt end, or large sweet spot, for striking accuracy. They have high quality EN31 carbon steel blades with narrow side bevels which flatten and sharpen quickly and give a durable cutting edge which is ideal for woodworkers. The hardwood socket handles are replaceable and require setting prior to use. These delicate looking chisels are well balanced and every bit genuine hard working chisels. Set of eight chisels, individually boxed, supplied in a suede tool roll. Sizes: 1/8in, 1/4in, 3/8in, 1/2in, 5/8in, 3/4in, 1in, 1.1/4in.
The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. Fine cut blade 11 TPI.
This 7-piece metric hexagon key set has a pocket knife style, fold away design whereby the hexagon key folds into the handle after use. The keys are made fom high tensile steel. Contains 1 of each: 1.5, 2, 2.5, 3, 4, 5, 6mm.
The STANLEY CONTROL-LOCK Pocket Tape has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears. Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements. There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 3.5 metres helps you to measure confidently from a distance, even when working alone. Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt. Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. Available with metric only or metric and imperial graduations.This STANLEY CONTROL-LOCK Pocket Tape has metric and imperial graduations.It has a double sided print blade enabling easier overhead measurements or use in awkward spaces. Its abrasion-resistant blade coating provides additional durability. The first 20cm of the blade is also treated with a BladeArmor coating to reinforce the most vulnerable part, of the blade, and reduce the risk of kinks or tears.Its innovative Multi-catch Hook provides more contact surface and grip for greater control, whilst the TRU-ZERO feature ensures precise inner and outer measurements.There is also a detachable magnet for greater versatility. The 25mm blade width and extended reach of 8 metres helps you to measure confidently from a distance, even when working alone.Ergonomically engineered to fit comfortably in the palm of your hand. Its bi-material casing provides exceptional grip. Equipped with patented Twin-Core technology, resulting in a compact case design taking up less space on your tool belt.Its flat-based design also ensures more stability on work surfaces. An integrated finger brake provides users with full control when retracting and extending the blade ensuring more controlled measurements and longer tape life. Class II Accuracy. Suitable for most professionals, providing a reassuring ±0,5mm error tolerance at 1m. (Metric and imperial graduations). Specification: Blade Length: 8m/25ftBlade Width: 25mmAccuracy: EC Class II
This Blue Spot socket set contains 11 useful 1/4 inch square drive sockets which are made from chrome vanadium steel and which have a deep reach for better access. The set contains the following sizes:4, 4.5, 5, 6, 7, 8 ,9, 10, 11, 12 and 13mm. Supplied with a storage rack.
Stanley FatMax® Digital Levels are highly accurate, measuring to the nearest 0.10 degrees at level and plumb. It has 3 vials: horizontal, vertical and the digital vial. A buzzer sounds at 0°, 45° and 90°. The LCD screen features 180° readout, where the display flips in the upside down position to enable easier reading. The level has a recalibration function, allowing a 'false zero', a hold function and a mode function. It is able to measure in degrees (°), percentage (%) and mm/m. It has 2 milled surfaces and a magnetic base. Supplied with a water-resistant bag. Accuracy: Level and plumb: ±0.05.Other angles: ±0.10.The STA042065 Digital Level is 60cm in length.
Bahco Cabinet Rasp with an ERGO™ handle for use in wood, plywood, wallboard, plastics and other soft materials. Edges and surfaces tapered towards the point. Size: 200mm (8in).
SBSF series sockets 3/8in, hexagon in metric and imperial sizes.DIN 3124 / ISO 2725. 1/2in 10 DIN 3120 / ISO 1174.Finish: nickel and matt chrome-plated.Material: VANADIUM-EXTRA.With dynamic-drive profile.Size: 19mm.
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond - gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Contents: Parallel: 3.5 x 75mm, 5.5 x 150mm.Flared: 5.5 x 100mm, 8 x 150mm. Pozi: PZ1 x 100mm, PZ2 x 125mm.
IRWIN Vise-Grip adjustable wrenches have scales in both a metric and imperial on their jaws. The parallel jaws have a smooth surface to provide a secure grip and to help prevent scratches. The quick adjusting jaw opening mechanism allows easy, one-handed, fine adjustment. This durable wrench is made from chrome vanadium steel for a durable wrench.10508158: Length: 300mm, Capacity 38mm.
IRWIN STRAIT-LINE Speedline Pro Chalk Reel with 6:1 planetary gears, provides smoother line extraction and longer gear life that is 6x faster rewind than traditional chalk reels. Its anti-jam spool design helps to reduce line damage and aerate chalk. A large, 1/4-turn locking top allows for quick chalk fill with increased visibility. The cases overmold grip provides improved grip and comfort. Supplied with a 30m hi-tensile line and wide prong hook for secure anchoring.
IRWIN Vise-Grip adjustable wrenches have scales in both a metric and imperial on their jaws. The parallel jaws have a smooth surface to provide a secure grip and to help prevent scratches. The quick adjusting jaw opening mechanism allows easy, one-handed, fine adjustment. This durable wrench is made from chrome vanadium steel for a durable wrench.10508161: Length: 150mm, Capacity 25mm.
Record IRWIN Mechanics vices are the most popular and widely used general purpose vice for light to medium-duty applications. The vice has high quality grey iron castings that resist distortion under severe pressure, with a smooth action provided by dovetailed, long barrelled, unbreakable nut and hardened steel replaceable jaw plates.Record Irwin No.1 Mechanics Vice. Jaw Width: 75mm (3in).
This IRWIN Record Multipurpose Vice with fused steel handle and rotating pipe jaws. Also with swivel base and incorporated anvil. Jaw width: 120mm (5in). Throat depth: 70mm (3in). Swivel base: 360°.
Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round.Size: 16cm.Cut: 2 (smooth).Type; half round needle file.
SB-3753N series centre punches made from vanadium steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish.Size: 8mm (5/16 in).Length: 150mm (6 in).
The Hultafors Scandinavian Butt Chisel is an everyday chisel, sharp, reliable and always at hand. Ready for tough precision and all-round use, from adjusting and fitting to prying and demolishing. The chisel has a perfectly sharpened high-quality Japanese steel blade with heavy-duty handle designed for hard hammer blows. The blade is rust protected by Electrophoretic deposition (EPD). Supplied in a smart holster with a clip for easy access at all times.Hultafors EDC20 Scandinavian Butt Chisel. Blade: 20mm.Overall Length: 232mm.
The 31 Piece Wiha Service Technician Tool Set is ideal for electrical and electronic maintenance work on machines and components. All the VDE tools in this kit have been individually tested at 10,000 V AC for electrical safety in accordance with IEC 60900:2012. Approved for 1,000 V AC.Supplied in a combined laptop bag/ toolbag, ideal for service technicians. The tool side bag, can be removed and used separately thanks to zip fastening. Contains the following: 2 x SoftFinish electric slimFix Slotted Screwdrivers: 3.5 x 100mm & 5.5 x 125mm. 2 x SoftFinish electric slimFix Phillips Screwdrivers: PH1 x 80mm & PH2 x 100mm. 2 x SoftFinish electric slimFix Pozidriv Screwdrivers: PZ1 x 80mm & PZ2 x 100mm. 4 x PicoFinish Fine Slotted Screwdrivers: 1.5 x 40mm, 2.0 x 40mm, 2.5 x 50mm and 3.0 x 50mm. 2 x PicoFinish Fine Phillips Screwdrivers: PH00 x 40mm & PH0 x 50mm. 1 x Professional electric Needle Nose Pliers 200mm. 1 x Professional electric Diagonal Cutters with DynamicJoint 160mm. 1 x Electronic Needle Nose Pliers 135mm. 1 x Electronic Diagonal Cutters 130mm. 1 x L-key Hex Ball Set, 10 Piece in Compact Holder (1.5-10mm). 1 x Switch Cabinet Key. 1 x Automatic Stripping Tool (up to 6mm²). 1 x Stripping Tool for round cables. 1 x SoftFinish Single-pole Voltage Tester 110-250V.
Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers.Size 225mm (9in)
The Wiha PicoFinish Fine Screwdrivers come with a round Chrome vanadium steel blade, matt chrome plated. Its ergonomic handle design with a soft zone provides increased comfort. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. Printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile.Ideal for delicate and high-precision tasks in precision mechanics as well as for hobbyists and model building. This 7 Piece Set contains the following sizes: 4 x Slotted Fine Screwdrivers: 1.5 x 40mm, 2.0 x 40mm, 2.5 x 50mm & 3.0 x 50mm. 3 x Phillips Fine Screwdrivers: PH00 x 40mm, PH0 x 50mm & PH1 x 60mm.
This Wiha Voltage Detector is used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
Imperial 13in lengths of high carbon bright steel, precision ground to very close tolerances; Above 1 in + - 0.0005in.Below 1 in + - 0.00025in. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 7/16 in
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size: 3mm x 0.50 Taper.
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 8.0mm x 1.25 taper
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 6.0mm x 1.0 bottoming
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 4.0 x 0.7 second
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 4.0mm x 0.7 taper
The Faithfull Ratchet Combination Spanner Set in Tool Roll, 6 Piece, has a chrome vanadium finish and flexible ratchet heads, which can turn through 180 degree, allowing them to be used in awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.Supplied and held in a convenient fabric tool roll. Specifications: Sizes: 8, 10, 13, 15, 17, 19mm.
The Wiha eMobility Voltage and Continuity Tester ensures electrical isolation. It is suitable for voltage testing, flow testing and rotational field testing. Also suitable for testing hybrid and electric vehicles as well as photovoltaic systems.The illuminated LED display shows present voltage on an 8-level scale, as well as 'the' actual value. It additionally offers the option of single-pole phase testing, optical rotational field display, as well as automatic polarity recognition.An integrated spacer makes quick one-handed testing possible. Whilst measuring point illumination makes it ideal for work in poorly lit working environments. For additional safety, a low battery charge is indicated directly on the LC display. Complaint with the standards EN 61010-1 and EN 61243-3:2014. Specifications: Min. - Max. Voltage (AC/DC): 12-1,000/12-1,500V.Contamination Level: 2.Protection Class: IP 64.Operating Temperature: -15 degreeC - 40 degreeC.Power: 2 x AAA Batteries (supplied).
This 4 Piece Wiha Classic Circlip Plier Set with MagicTips safety locking function. Fitted with Wiha Classic grips for increased comfort. Contains: 1 x MagicTips Classic Circlip Pliers for inner rings (bores) with straight shape J 1. Size: 140mm. 1 x MagicTips Classic Circlip Pliers for inner circlips (holes) with a straight shape J 2. Size: 180mm. 1 x MagicTips Classic Circlip Pliers for outer rings (shafts) with straight shape A 1. Size: 140mm. 1 x MagicTips Classic Circlip Pliers for outer rings (shafts) with straight shape A 2. Size: 185mm.
The Wiha PicoFinish Pozidriv Fine Screwdrivers come with a round Chrome vanadium steel blade, matt chrome plated. Its ergonomic handle design with a soft zone provides increased comfort. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. Printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile.Ideal for delicate and high-precision tasks in precision mechanics as well as for hobbyists and model building.
