All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : Black.Size : 89 mm (3.1/2in).Weight : 1.1 kg (40oz).Face : 89 mm.
Thor replacement cylindrical faces are constructed from compressed hide, these are for use with a malleable iron split head hammer. Hide faces will absorb the shock of the blow and transfer the force to the item being struck without fear of damage. The Thor hide faces are ideal where a heavy blow is required in a relatively small striking area. Faces are designed to wear and be replaced.For use with size 4 Thor split head hammers .Face diameter 50mm (2 in)
The Faithfull Carvers Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.
The Roughneck Gorilla V-Series Double-Ended Scutch Hammer accepts both scutch combs and chisels, making it ideal for stone and masonry dressing. Manufactured from drop-forged, hardened and tempered steel for extreme strength and durability. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. There is a lanyard hole in the base of the handle, ideal for safe and secure tethering when working at height.
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
The Stanley FatMax® Antivibe All Steel Rip Claw Hammers have a one-piece forged construction for durability and balance. The hammers have an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 450g (16oz).
The Roughneck Gorilla V-Series Slater's Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. The pick end enables holes to be punched in slates and an integrated nail puller allows nails to be removed with ease. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.
This lump/club hammer has been designed with a one-piece forged construction for strength and durability. The patented anti-vibe technology reduces vibration transmitted to wrist and elbow. Ideal for use in confined work areas with little room for a full arc-swing. The wide face makes it ideal for striking chisels and punches.Weight 1360g (3 lb)
Thor replacement split head nylon faces. Made from hard white nylon shore, hardness D 61-65. The best all-purpose nylon face for light and heavy assembly work.For use with size 2 Thor split head hammers. Face diameter: 38 mm (1 1/2 in).
The Stanley FatMax® Antivibe All Steel Curved Claw Hammer has a one-piece forged construction for durability and balance. With an Antivibe tuning fork to dampen vibration and a soft grip for comfort and control.Weight: 570g (20oz).
This FatMax® Brick Hammer has been designed with one-piece forged construction for strength and durability and the patented Anti-Vibe technology which reduces vibration transmitted to wrist and elbow. It is ideal for cutting brick, masonry tile and concrete block. The blade has a hardened cutting edge designed to score materials before striking for an even cut.
Roughneck Gorilla V-Series Club Hammer offers increased striking power and reduced vibration. Manufactured from drop-forged, hardened and tempered steel. The unique V-Shock twin-beam girder shaft acts as a damper, resulting in reduced shock and vibration transmission, and further controlled by an air-cushioned grip. Reduced weight in the shaft transfers the centre of gravity towards the head, resulting in improved balance and reduced effort. 45 degree chamfered striking edges prevent chipping and damage to striking surfaces. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Gorilla V-Series Club Hammer 1.1kg (2.1/2 lb)
Welding or chipping hammers are used to clean and remove slag from welds (dressing) and can also be used for boiler scaling applications. The Faithfull Welders Chipping Hammer has an all steel construction that makes it both solid and strong. It features a striking head with a sharp conical point and a flat chisel bevelled end. The unique helical barrel spring handle helps to prevent kickback and reduces resonance, helping to avoid fatigue during long periods of use. The hammer is fitted with an integral hanging hook for easy storage. Length: 290mm.
Claw Hammer with a drop forged, semi-polished, heat treated steel head, a full size round face for accurate striking, and a full claw for maximum pulling power. Blue cushioned rubber grip for comfort.Weight 450g (1lb).
Roughneck Non Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors. These rubber mallets will not discolour or leave marks on work surfaces. Used as a general purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.The Roughneck ROU61216 450g (16oz) rubber mallet has a mediumhard rubber head, soft grip handle and a strong steel shaft, this is allmoulded together to make a one piece tool.
Roughneck Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection.Weight: 4530g (10 lb). Handle length 890mm – 915mm (35″ – 36″) depending on head weight.
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 44mm (1 3/4 in).Weight 850g (2lb).
Thor deadblow hammers have coated die-cast aluminium alloy head with rubber grip and screw-in white nylon or brown polyurethane faces. Available in 5 different weights. The hollow die-cast head is partially filled with steel shot to add to the weight, prevent rebound and deliver dead blows of maximum force. Thor deadblow hammers are ideal as a multi-purpose striking tool and are ideal for sustained and effective blows without recoil. They are commonly used in most assembly / fitting applications including engineering, toolmaking, shopfitting, partitioning and double glazing.Replacement faces are available.Diameter 32mm (1 1/4 in).Weight 550g (1lb).
A pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling nails. On the opposing end is a rectangular striking head. Tubular steel handle with a comfortable non-slip rubber grip.
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 25mm (1 in).Weight 250g (1/2lb).
The Wiha Electrician's Hammer easily removes nails and nail clamps or positions cables and dowels. Its U-shaped striking surface provides optimum access to tight spaces. The flat, straight claws on the hammer head enable users to remove nail clamps even from difficult-to-reach spots and pull nails quickly and easily from the wall. This hammer unites ergonomic handling, balanced weight distribution and the ability to remove fastening elements such as nail clamps.Fitted with an ergonomically designed, non-slip handle. Fits perfectly into the hand, ensuring a secure hold when striking. The base of the handle can be used to position cables and dowels, without causing any damage to the wall. Specifications: Head Weight: 300g.Hammer Head Height: 23.9mm.Overall Length: 283mm.
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Cast iron head. Diameter 63mm (2 1/2 in).Weight 2200g (5 1/2lb).
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 2.Weight 825g (2lb).Diameter 38mm (1 1/2 in).
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 38mm (1 1/2 in).Weight 650g (1 1/2lb).
Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow and the the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 4.Weight 2830g.Diameter 50mm (2 in).
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 4.Weight 2000g (4 1/2lb).Diameter 50mm (2 in).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size 4Weight 2500g (5 1/2lb)Diameter 50mm (2 in)
Thor hide hammers have malleable Iron head fitted with two cylindrical faces of compressed buffalo hide on a wooden shaft. The malleable Iron head provides the weight for the blow and the hide faces absorb the shock whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These hide hammers have faces that are designed to wear and can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.)Size: 3.Weight 1230g (3 lb)Diameter 44mm (1 3/4 in).
Estwing Straight Claw Hammer is one-piece forged steel construction with a traditional leather handle grip made from sole leather washers pressed on and riveted. The straight claw hammer offers unsurpassed balance and temper. Straight claw is useful for ripping out. Made in the USA from high-quality steel.Weight 570g (1 1/4lb)
The Hultafors STFS Non-Rebound Hammer has a striking head filled with damping steel balls that dampen vibrations and reduce recoil. The nylon strikers are gentle on workpieces. It has a steel shaft with an ergonomic Santoprene rubber handle.Hultafors STFS40 Non-Rebound Hammer
Thor rubber mallets are a one-piece design with rubber head and self locking handle. These semi-hard rubber mallets give a gentle but firm blow with little rebound. Used as a general-purpose mallet in automotive, industrial, brewery, DIY, garden landscaping and camping applications. Black Head: Ideal for use under damp conditions or outdoors.White Head: Will not discolour or leave marks on work surfaces.Weight: 1450g (3.1/4lb).Diameter: 90mm (3.1/2in). White HeadNon Marking
The Estwing E3/11 dry wall hammer has a cushioned vinyl grip and solid one piece forged construction. Crowned, scored hammer head which reduces the likelihood of impact marks on the plasterboard. Cutaway and notched cutting blades for withdrawing nails and cutting laths. Head Weight: 400g (14oz)
Chrome plated zinc head (except THO720 12-720N which has a cast iron head) with two screw-in nylon faces which are designed to be replaced when worn. THO708, THO720, THO710R and THO712R are fitted with wooden handles while THO710, THO712, THO714 and THO716 have plastic handles. All have two white nylon faces except THO710R and THO712R which have one white nylon and one soft grey face. Available in 6 different weights. Used as a multi-purpose striking tool in most assembly applications including engineering, furniture making, shopfitting, partitioning, double glazing and injection moulding operations.Alternative colour coded faces to distinguish hardness are also available.Diameter 50mm (2 in).Weight 1230g (2 3/4lb).
These Thor hammers are a general-purpose, soft-faced hammer for automotive and general engineering applications in assembly, repair and maintenance operations. Available in 6 different weights. The malleable iron head is fitted with one hide and one copper face on a polished wooden handle. (No.4 size hammer has a slip-on handle - all other sizes have the usual wedge type handle fitted.) Ideal for use where a heavy blow is required in a relatively small striking area. One face is made from pure copper, the other from highly compressed buffalo hide and are both designed to wear and be replaced - spare faces are available.Size: 5.Weight 5000g (11lb).Diameter 70mm (2.3/4 in)
