Thor Hide mallets have a one piece cylindrical compressed hide head, that provides a large striking surface with a relatively light head weight. These hide mallets are widley used in sheet metal forming, the jewellery trade and used on copper, brass and other soft materials that need to be shaped etc. These Mallets are fitted with an oval wood handle.Size: 5. Weight 570g (1 1/4 lb).Diameter 63 mm (2 1/2 in).
Roughneck Non Marking White Rubber Mallet has a single piece rubber head with a steel and soft grip handle. For general industrial use, these semi-hard rubber mallets give a gentle but firm blow with little rebound, ideal for use under damp conditions or outdoors. These rubber mallets will not discolour or leave marks on work surfaces. Used as a general purpose mallet in automotive, industrial, brewery, DIY and camping, garden landscape or work site application when hard materials need to be layed like concrete slabs, patios etc.The Roughneck ROU61216 450g (16oz) rubber mallet has a mediumhard rubber head, soft grip handle and a strong steel shaft, this is allmoulded together to make a one piece tool.
The Thor Hide hammer has split cast iron head with two hide faces fastened securely to the handle with two socket head cap screws. The head design allows quick adjustment or replacement of either the handle or the faces, while the faces are designed to wear and can be rotated for even wear. There are 5 different weights to choose from in this range. For use as a heavy-duty, multi purpose soft-faced hammer in most industries for assembly, repair and maintenance operations.Size: 3.Diameter: 44mm (1 3/4 in).Weight: 1550g (3 1/4 lb).
This Roughneck Club Hammer offers superior strength and safety. Manufactured from drop-forged, hardened and tempered steel. Chamfered striking edges prevent chipping and damage to striking surfaces. Its solid fibreglass core handle is securely attached to the head with a powerful epoxy bond. The handle is fitted with an air-cushioned grip for exceptional comfort and reduced fatigue. A lanyard hole in the base of the handle allows for safe and secure tethering when working at height.1 x Roughneck Club Hammer Fibreglass Shaft 1.13kg (2.1/2 lb)
The Wiha Soft-Face Dead-Blow Hammer comes with a yellow, medium-hard hammer head for tool and machine engineering, car repairs, sheet metal and assembly work. Makes work easier, with an optimum impact effect and less effort needed. Deadblow hammering without recoil minimises loads on joints, tendons and muscles. Fitted with an ergonomic hickory wooden handle. This Wiha Soft-Face Dead-Blow Hammer has the following specifications: Hammer Face Diameter: 60mm.Hammer Head Height: 165mm.Overall Length: 420mm.Weight: 1710g.
The Wiha Soft-Face Dead-Blow Hammer comes with a yellow, medium-hard hammer head for tool and machine engineering, car repairs, sheet metal and assembly work. Makes work easier, with an optimum impact effect and less effort needed. Deadblow hammering without recoil minimises loads on joints, tendons and muscles. Fitted with an ergonomic hickory wooden handle. This Wiha Soft-Face Dead-Blow Hammer has the following specification: Hammer Face Diameter: 50mm.Hammer Head Height: 135mm.Overall Length: 385mm.Weight: 1085g.
Roughneck Club Hammer with a fibreglass handle manufactured from drop forged alloy steel hardened and tempered with a black painted head with polished faces and chamfered edges, epoxy bonded for added strength. Solid core fibreglass handle with polypropylene jacket. Unique treble injected TPR soft grip handle for comfort during use and reduced fatigue.Weight: 1810g (4 lb).
This Footprint Club Hammer has a forged, hardened and tempered head, and a solid fibreglass core handle for strength. Its thick rubberised grip provides superior comfort when striking objects and helps to absorb shock. A large safety loop allows tethering the hammer for working at height.Head Weight: 1.13kg (2.1/2lb)
The Vaughan Drilling Club hammer designed for striking star drills, cold chisels, brick bolsters, and punches. With rust-resistant blue finish and polished striking faces with generous bevels. Forged from high carbon steel and with a patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. Exclusive air cushioned slip-resistant grip for comfortable use. Sizes 2lb, 3lb and 4lb. Made in the USA.The Vaughan RHD3 Drilling Hammer has the following specifications: Weight: 3lb.Handle length: 280mm (11 inch).
The Vaughan E18F Electrician’s Hammer has a fibreglass handle. Its head is fully polished and forged from high carbon steel for excellent strength. It has a round extra-long pole, meaning it is ideal for reaching into electrical junction boxes. The Electrician's Hammer has a patented hollow core in its fibreglass handle to absorb shock and provide superb balance. It has a steel wedged and epoxy-sealed eye and an exclusive air cushioned, slip-resistant grip. Weight: 510g (18oz).Handle length: 355mm (14in). Made in the USA.
The Stanley FatMax® Hi Velocity Curve Claw Framing Hammer with innovative MIG Welding technology creating a lightweight and well balanced hammer with the strength of steel. Magnetic insert for starting nails.
Faithfull universal engineers metal working hammer, precision ground with hardened striking faces to withstand the rigours of all metal working applications. Manufactured in accordance to BS876. Fitted with a traditional hickory handle.Weight 113g (1/4lb)
This Faithfull Deadblow Hammer is perfect for heavy and effective blows. The specially designed head is filled with steel shot to prevent rebound and delivers dead blows for maximum impact. It is coated in PVC with a non-slip grip.1 x Faithfull Deadblow Black PVC Hammer 680g (1 lb 8oz)
This Faithfull Deadblow Hammer is perfect for heavy and effective blows. The specially designed head is filled with steel shot to prevent rebound and delivers dead blows for maximum impact. It is coated in PVC with a non-slip grip.1 x Faithfull Deadblow Black PVC Hammer 900g (2 lb)
The Faithfull general purpose Club Hammer with precision ground striking faces specially hardened and heat treated to withstand the most high impact heavy applications.Fitted with a fibreglass handle, with a rubber grip.Manufactured in accordance with BS876.1 x Faithfull Club Hammer Fibreglass Handled 1.13kg (2.1/2lb).
Roughneck Club Hammer with a fibreglass handle manufactured from drop forged alloy steel hardened and tempered with a black painted head with polished faces and chamfered edges, epoxy bonded for added strength. Solid core fibreglass handle with polypropylene jacket. Unique treble injected TPR soft grip handle for comfort during use and reduced fatigue.Weight: 1130g (2 1/2lb).
All-steel curved claw hammer highly polished of a one-piece construction.The narrow shaft helps weight distribution and balance. Fitted with a moulded vinyl grip that is bonded to the hammer shaft for cushioning and user comfort.Manufactured in accordance to BS876.Weight: 570g (1 1/4 lb)
Faithfull carpenters hammer with a precision ground and hardened curved claw to withstand the most heavy nail pulling. Securely fitted with a hickory shaft providing maximum leverage. Manufactured in accordance with BS876.Weight 570g (1 1/4lb)
This Faithfull curved claw hammer has a polished steel head which has been correctly hardened and tempered. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. Manufactured in accordance with BS876.Weight: 570g (1 1/4 lb)
The Faithfull Classic Tapered Mortice Pattern Mallets for general joinery work.Made from straight grained beech to provide the required weight and resistance against splitting.The morticed head and tapered handle maintain a perfect and secure fit.The striking surfaces of the head are angled toward the user and ensure a square-on delivery with each blow.Size: 115mm (4.1/2in) Weight: 470g
The Faithfull Classic Tapered Mortice Pattern Mallets for general joinery work.Made from straight grained beech to provide the required weight and resistance against splitting.The morticed head and tapered handle maintain a perfect and secure fit.The striking surfaces of the head are angled toward the user and ensure a square-on delivery with each blow.Size: 127mm (5in) Weight: 540g
The Faithfull Classic Tapered Mortice Pattern Mallets for general joinery work.Made from straight grained beech to provide the required weight and resistance against splitting.The morticed head and tapered handle maintain a perfect and secure fit.The striking surfaces of the head are angled toward the user and ensure a square-on delivery with each blow.Size: 100mm (4in) Weight: 430g
The Faithfull universal carpenters hammer with precision ground and hardened pein and head.This well balanced hammer allows maximum use for all types of carpenters fixings.Fitted with a hickory handle.Manufactured in accordance with BS876.Weight: 450g (1 lb).
All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : BlackSize : 63mm (2.1/2in).Weight : 680g (24oz).Face : 63 mm.
Roughneck Sledge Hammers with fibreglass handles are manufactured from drop forged alloy steel hardened and tempered, with 8-sided 45 degree chamfered precision milled faces. With an industrial grade epoxy for a longer lasting bond, solid core fibreglass handle with polypropylene cover and double injected TPR soft grip handle with integral overstrike protection.Weight: 7260g (16 lb). Handle length 890mm – 915mm (35″ – 36″) depending on head weight.
All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : White.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.
A Bricklayers Hammer with polished blade and hardened striking face specially designed for the cutting and dressing of all types of bricks and masonry.Fitted with a traditional hickory handle.Weight 830g (1 3/4 lb)
Faithfull Nylon Hammers have a multi-purpose soft face with a chrome plated head and screw-in nylon faces that can be replaced as needed. The hammer features a sturdy plastic shaft with a non-slip black grip. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer 32mm (1.1/4in)
Supplied in kits, these Faithfull Hammer Wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Each kit includes two malleable steel hammer wedges and one wooden wedge. When fitted correctly they provide a secure and safe attachment of a striking head to a wooden handle. Please note: Hammer wedges are NOT suitable for use with fibreglass replacement handles.The FAIHW5N Kit consists of: 2 Steel wedges: 18 mm width (size 3). 1 Wooden wedge : 62 x 65 mm. Suitable for axe heads of all weights.
Faithfull Nylon Hammers have a multi-purpose soft face with a chrome plated head and screw-in nylon faces that can be replaced as needed. The hammer features a sturdy plastic shaft with a non-slip black grip. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer 38mm (1.1/2in)
All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : BlackSize : 76mm (3in).Weight : 794g (28oz).Face : 76 mm.
All purpose rubber mallet, used by professional tradesmen in the automotive industry and in maintenance workshops. Also suitable for DIY tasks and applications where a steel head is unsuitable. Featuring self-locking handles to deliver a gentle but firm blow with little rebound. The wooden handle is contoured to provide a comfortable grip during use.Colour : Black.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.
The Steelmaster claw hammer has a heat treated and polished carbon steel head for strength, durability and safety. A seamless, oval tubular steel shaft provides strength and balance and the vinyl soft-grip ergonomic handle gives comfort and grip in use.Weight 567g (1 1/4 lb)
The Vaughan Curved Claw Nail Hammer is an all steel curved claw hammer with full-polished head with an octagon neck and a round face. Forged from high carbon steel with patented Shock-Blok™ plug in its head using hickory and rubber to absorb shock. For comfort and control, it has an exclusive air cushioned, slip-resistant grip. Sizes: 450g (16oz), 570g (20oz) and 680g (24oz). Made in the USA.The Vaughan R24 Curved Claw Nail Hammer has the following specifications: Weight: 680g (24 oz). Handle length: 355mm (14 inch).
Replacement screw in Nylon face for use with Faithfull soft face hammers. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer Replacement Face 38mm
