The Wiha Screw Extractor Set 16 Piece are for thread-conserving removal of damaged or broken-off screws with left-hand or right-hand thread, particularly stripped hex screws. Simply hammer in the extractor, position the ring spanner to the bottom and screw out without tilting.Supplied in a handy carry case. Contains the following: 8 x Screw Extractor Drill Bits: 2.3, 2.8, 3.4, 4.5, 5.7, 6.8, 9.0 & 11.0mm. 8 x Screw Extractors: 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0 & 10mm.
The Faithfull Die Holders are used for securely holding round dies for the clean cutting of external threads. The body and ends are black powder-coated, with each end knurled for a comfortable non-slip grip.Size: 25.4mm (1 in)
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container.Supplied complete with appropriate size tapping drill.Size 1/2 UNF x 20 TPILength 1 1/2 x Diameter
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 8.0mm x 1.25 second
Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 1.5mm (1/16in)Length: 100mm (4 in)
Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 5mm (3/16in).Length: 100mm (4in).
Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.Set of four: one of each size 1, 2, 3 & 4.Capacity: 1) 0 -1mm2) 0.75 - 1.5mm3) 1.5 - 3mm4) 3 - 4.5mm
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 2.5mm (3/32in)Length: 100mm (4in)
Workpieces with straight edges, shoulders, grooves, studs, dowels, centre points and scribed lines can all be quickly and accurately located with this handy tool. Made of tool steel, hardened, ground and lapped.Description: Single end Body diameter: 0.375 Inch Contact diameter: 0.200 Inch
1 x Moore & Wright 4006 Engineer's Square Grade B 150mm (6in)in Retail Packaging. Specifications: Blade Size: 181.0 x 25.4mm.Stock Size: 101.6 x 25.4mm.Inner Working: 82.4 x 155.6mm.
The Facom 249.G sheathed drift punches are tough and durable. With very high tensile strength, these punches feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener.The Facom 249.GJ7 7-piece set consists of 7 sheathed impact tools/drift punches. The punches are tough and durable. With very high tensile strength, they feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener. This set contains:1 x 249.G2 punch - 2mm x 140mm.1 x 249.G3 punch - 3mm x 150mm.1 x 249.G4 punch - 4mm x 190mm. 1 x 249.G5 punch - 5mm x 200mm.1 x 249.G6 punch - 6mm x 210mm.1 x 249.G8 punch - 8mm x 216mm.1 x 249.G10 punch - 10mm x 230mm.
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 3mm x 0.5 Length 1 1/2 x Diameter.
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 3/8 UNC X 16 TPILength. 1 1/2 x Diameter.
Widely used in automotive, aviation, diesel and farm equipment manufacture and also in jig, fixture and gauge work. Packed individually in envelope. Metric gauge 300 mm long.Thickness: 0.06mm
1 x Moore & Wright 4004 Engineer's Square Grade B 100mm (4in) in Retail Packaging. Specifications: Blade Size: 130.2 x 25.4mm.Stock Size: 76.2 x 25.4mm.Inner Working: 57.0 x 104.8mm.
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 33118 Firm Joint Outside Calipers have the following specification: Size: 450mm (18in).
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.37.0mm.Key Type.MC. 10mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.40.0mm.Key Type.MC. 10mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.35.0mm.Key Type.MC. 10mm hexagonal wrench
Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container.Supplied complete with appropriate size tapping drill.Size 7/16 UNF x 20TPILength 1 1/2 x Diameter
1 x Moore & Wright 4009 Engineer's Square Grade B 225mm (9in)in Retail Packaging. Specifications: Blade Size: 273.1 x 38.1mm.Stock Size: 139.7 x 38.1mm.Inner Working: 107.9 x 234.95mm.
The BOA Rotary Thread Rescue 382 is the worlds only rotary thread restoration tool. Restores any damaged thread: Male, Female, right, left, inch, metric, pipe, in seconds. Suitable for a multitude of DIY uses including bicycles, auto, motorbikes, anything with a thread around the home and garage. Use with a drill, multi-tool or die grinder. Mini Rotary Thread File: Product Size 1.0cm diameter x 5cm long x 0.32cm.Shank Pitches: down to 28 TPI (0.8 metric).Fits: 1.27cm (1/2in hole).
