The BOA Micro Grabit Kit is made from high quality hardened steel, fits all standard variable speed drills and will cleanly remove a variety of screws and bolts. Suitable for electronic, precision equipment and the medical industry. Removes: Wood Screws: 1.5-5mm, Bolts: 3-6mm
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: SecondThread Size: M6
The BlueSpot Tools External Chamfer/Deburring Tool is used to clean and repair the thread of damaged threads and studs between 3-19mm. The blades are manufactured from Tungsten Carbide which is extremely hard wearing and has a very high melting point (2,600°) making it ideal for cleaning threads and studs. For use on stainless steel, hardened steel, mild steel, copper, brass, fibreglass, hard plastic and more. Ideal for use with electric drills. Specifications: Shank: 1/4in Hex.Chamfer Angle: 50° (approx.)
The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in a case.The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.
The BOA Grabit quickly and easily removes broken, damaged, or embedded screws and bolts from wood, metal and plastic. It will work on the most popular screw head types. Simply burnish, flip the tool and extract. Compatible with all standard variable speed drills. Made from high quality tool steel, precision engineered for multiple extractions and maximum performance.
Wad punches are used for cutting holes in soft materials or for producing discs from the material being cut.One piece forging with ground and polished tapered section.Size 51mm (2 in)
These Faithfull magnets have a traditional horseshoe shape and are often referred to as pocket magnets. They are ideal for use in education, experiments and science projects. They have a north and south pole and can be used to easily check whether items are ferrous or not. The magnets are made from Alnico to provide a high resistance to corrosion and will operate in temperatures up to 500 degreeC.Supplied with a plate keeper to help preserve the strength of the magnet and stop metal being attracted to the magnet when not in use.This Faithfull Horseshoe Magnet has the following specifications: Size: 25mm.Pull Power: 2.2kg.
Dormer 14pc Set, features E500 straight flute taps and A002 TiN Coated Jobber Drills is ideal for a wide range of general purpose machining applications. It features the Dormer E500 straight flute taps and A002 TiN coated jobber drills. E500 Metric coarse straight flute taps: M3, M4, M5, M6, M8, M10 & M12 Straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. They can be used for either through or blind holes. When tapping blind holes straight flute taps should be used in sets. Tolerance: Class 2 for 6H Fit.Surface treatment: Bright.Material: HSS High Speed Steel.Chamfer No: 1,2 and 3, Serial no 4 and 5.Flute Geometry: Straight Flutes. A002 HSS-TiN Coated Jobber Drills : 2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.5mm and 10.2mm. General purpose drills, made from High Speed Steel with a Titanium Nitride coating for longer life, with good self centring capability on a wide range of materials. Particularly suitable for aluminium and other abrasive materials. Ideal for drilling wood and chipboard. Suitable for both hand and machine use. DIN338RN/BS328/ISO235.
The Faithfull External Spring Calipers have polished, natural steel finish legs, are made of flat stock and are carefully balanced, with treated points. A strong but flexible bow spring and centrally located adjustment screw give a smooth and precise action.Size 200mm (8 in)
The Faithfull Feeler Gauge contains 20 blades that cover the sizes from 0.05mm to 1.00mm. The blades are 100mm long and made from hardened, tempered and polished steel. A knurled thumbscrew allows the blades to be locked in place. Feeler gauges are used to measure the size of small gaps between 2 objects that are in close proximity. Ideal for setting gaps between components in vehicle engines such as valve adjustment, setting distributors and checking spark plugs.
The Moore & Wright DPC Series Digital Caliper has a Polycarbonate frame and offers 4 way measurement (mm/inch, absolute/incremental measurement) with an accuracy of ± 0.2mm/0.008in. The caliper can be zeroed at any point on the scale. Supplied with a CR2032 battery and a vinyl pouch. Specification Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm.
The Faithfull 4 Piece Screw Extractor Kit easily removes even the most damaged and hard to remove screws and bolts. The bits have a self-centring tip and are manufactured from hardened tool steel and double tempered for extra hardness. They will remove screws from wood, metal or plastic, or screws manufactured from any alloy including soft brass and free-spinning screws. Works on the following types of screw and bolts: Pozidrive, Phillips, Flat, Hex and Star Headed, even jagged and uneven breaks. They can be used with most power drills. Sizes: 1, 2, 3 and 4.
The BlueSpot Digital Vernier Caliper has external and internal measuring jaws with a deep measuring blade. With metric and imperial scales and an LCD display. Supplied in a robust plastic box. Specification: Range: 0-150mm (6in)Accuracy: ± 0.25mm/0.01in
Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm + - 0.025mm.Below 25mm + - 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 12mm
The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly that provides a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.The Moore & Wright 33118 Firm Joint Outside Calipers have the following specification: Size: 450mm (18in).
Feeler gauges are used to adjust tappets, spark plugs, distributor points, check bearing clearances and gear play, fitting pistons, rings and pins and gauging narrow slots. Leaves are tempered steel, easily removed and replaced. There is a locking device on all sets.Millimetre Reading Gauges with Straight leaves - Sized 12.7 x 114mmNo. of leaves: 13Range 0.04 - 5mm (0.04- 0.08 by 0.01mm steps 0.10, 0.15, 0.20,0.30, 1.0, 2.0, 3.0 and 5.0mm).
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: BottomingThread Size: M8
Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm + - 0.025mm.Below 25mm + - 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 15mm
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 506 Spring Dividers have the following specifications: Size: 150mm (6in).
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 5mm (3/16in)Length: 100mm (4in)
1 x Moore & Wright 4004 Engineer's Square Grade B 100mm (4in) in Retail Packaging. Specifications: Blade Size: 130.2 x 25.4mm.Stock Size: 76.2 x 25.4mm.Inner Working: 57.0 x 104.8mm.
The Moore & Wright DFC Series Digital Calipers are fitted with an extra large, easy-to-read display. The calipers have a high measuring speed of 120in per second and you can read/convert measurements in inch, metric and fractions. The frame is made from stainless steel and provides extra smooth movements when measuring. Supplied with a CR2032 battery. Specification Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm.
The Moore & Wright CSM Precision Rules are fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life. Theseare rules specifically designed for use with the Combination Sets (MAWCSM300 & MAWCSME12).The Moore & Wright CSRM600 is a 600mm rule is perfect for use with the combination sets and is graduated on both sides. Measurements: mm and 0.5mm on both sides; numbered every 10mm. PLEASE NOTE This is ONLY the Rule.
Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. Length: 100mm (4in).Set of all sizes: 1.5mm (1/16 in), 2mm (5/64 in), 2.5mm (3/32 in), 3mm (1/8 in) and 4mm (5/32 in).
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.22.5mm.Key Type.MB. 8mm hexagonal wrench
A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge. The special design allows an even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches boxed singly without key, which should be ordered separately. To use these punches they require a hole to be drilled through the sheet metal (large enough to clear the heagonal Screw) then the Die and hexagonal screw are threaded through the sheet metal then onto the die nut and screw die nut. When the hexagonal screw is tightened the punch will cut cleanly and evenly through the metal.Size. 1 3/4 in.Key Type.B. 5/16 in hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.34.0mm.Key Type.MC. 10mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.12.7mm.Key Type. 6mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size:17.5mm.Key Type. 6mm hexagonal wrench.
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.47.0mm.Key Type.MC. 10mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size. 45.0mm.Key Type. MC. 10mm hexagonal wrench
A quick and easy way to cut clean metric sized holes in sheet metal up to 16 gauge. The special design allows even load during cutting and produces a burr free hole that needs no extra finishing. Heat treated cutting edges with black anti-corrosive surface finish to prevent rusting. All punches are sold singly without key, which should be ordered separately. Thread the punch onto the hexagonal screw and then pass the hexagonal screw through the hole. Position the die on top of the die nut and then screw the die nut onto the projecting hexagonal screw until it touches the metal sheet. Use a hexagonal key to turn the hexagonal screw. The screw will pull the punch through the metal and a hole will result. Please note these instructions apply to cutters up to 15 mm in size, for cutters 15 mm and over have a different configuration. Notably they have fewer components, in the larger cutters the thread is in the punch and thus there is no die nut.Size.19.0mm.Key Type.MB. 8mm hexagonal wrench
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 3.2 mm (1/8in).Length: 125 mm (5in).
The RIDGID Inner-Outer Reamers have a hardened steel construction and are suitable for cutting copper and stainless steel tubing. They have 46 cutting edges on the interior cone that allow for fast, clean, inner reaming and outer deburring/bevelling of 1⁄4in (6mm) to 2in (50mm). The reamers have dual inch/metric measurement bars.RIDGID 223S EN Inner-Outer Reamer Capacity: 6 - 40mm (1/4 - 1.1/4in).Weight: 0.34kg.
