The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 68 mm dia
The LENOX® Bi-Metal Holesaw features an advanced tooth design that increases cutting life. The large sharp teeth provide fast, efficient cutting in wood. The optimised tooth design also penetrates metal with ease. Increased wall thickness improves durability and minimises tooth loss. The SPEED SLOT® staircase design provides fast and easy plug ejection.This LENOX® Bi-Metal Holesaw has the following specification: Diameter: 40mmArbor: Standard: 2L, 3L, 6L or 7L; SNAP-BACK™: 2L, 6L
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.The Irwin IRW10501951 Speedhammer Plus drill bit has the following dimensions:Drillbit diameter: 5.5mmTotal length: 210mmWorking Length: 150mm
This IRWIN® Speedhammer Quad Drill Bit has the following specification: Diameter: 6mmOverall Length: 160mmWorking Length: 100mm The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.
The Dormer A002 Metric HSS-TiN Coated Jobber Drill Bits in Pouch Packs. Each bit has a pointed web and fluted tip design. The point design allows for efficient cutting, with a reduced axial force and allows for accurate centring. The web design provides optimised strength, rigidity and improves the feed of the drilling bit. The flutes allows for efficient chip form and evacuation. The bits have visible, tool in-situ marking that allows for easy identification. The optimised helix angle provides greater stiffness across the diameter range. The bright body improves cutting performance on ductile materials, and the Titanium Nitride coating resists flank and crater wear, and has low friction that allows for increased cutting speeds. Dormer A002 HSS-TiN Coated Jobber Drill 12.00mm Pouch of 1 OL:151mm WL:101mm Tip Diameter: 12.00mm.Working Length: 101mm.Overall Length: 151mm.
A777 Imperial Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 1/8in. Working length: 36mm.Overall length: 65mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 11/64in.Working length: 47mm.Overall length: 80mm.
Dormer G136 HSS Straight Shank 90° Countersink for production of 90° countersinks in most materials, which can also be used as a de-burring tool. Has a bright finish, 3 flute, ground all over. Other types available on request (MTS, 60°/82°/100°, Coated).Size: 10.00mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 1.0mm.Working length: 12mm.Overall length: 34mm. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 6.0mmWorking length: 57mm.Overall length: 93mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 6.80mmWorking length: 69mm.Overall length: 109mm.
The Dormer A110 Metric Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to: DIN 340RN/BS328/ISO 494.Tip diameter: 8.0mm.Working length: 109mm.Overall length: 165mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 5.80mmWorking length: 75mm.Overall length: 117mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 4.20mmWorking length: 43mm.Overall length: 75mm.
The Bahco 9631 Long Series Flat Bit is longer than a standard flat bit, useful for reaching awkward spots or for drilling accurate, deep holes into wood. It has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9631-8-400 Long Flat Bit 8mm
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-38 Flat Bit 38mm
The Bahco 9627 Series Long Combination Auger Bit is longer than a standard auger bit, designed for long reach applications. Made from hardened tool steel, lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9627 Series Long Combination Auger Bit has the following specification: Size: 10mmWorking Length: 385mmOverall Length: 460mm
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 8.5mm.Working Length: 72mm.Overall Length: 117mm.Pack Quantity: 10.
DEWALT Flat Drill Bits are made from high-quality chrome vanadium steel with a ground central point and cutting edges for accurate location and clean cutting. They also have a ground chip breaker to reduce splintering providing relatively clean holes and improved drilling efficiency. Ideal for rapid drilling of holes in wood. Suitable for natural hardwood and softwood, chipboard and other man-made materials. Supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. This 8 Piece Set contains the following sizes: 12, 16, 18, 20, 22, 25, 28 and 32mm.
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 22 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 108 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Bahco Sandflex® Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.Size: 64 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 8mmWorking Length: 350mmOverall Length: 410mmPack Quantity: 1
