The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 4.0mm.Working Length: 43mm.Overall Length: 75mm.Pack Quantity: 10.
The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts three times longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. The winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.1 x Bahco 9629-20 Flat Bit 20mm
A Taper Wedge Masonry Drill Bit for use with Faithfull and other makes of dry diamond core bit systems, requiring the use of an 'A' taper pilot drill bit. Length: 200mm.
The Faithfull FAIDCKIT11 11 Piece Diamond Core Drill Kit is suitable for brick and concrete blocks etc. They are ideal for plumbing, electrical, engineering installation and general building tasks. All cores are 1⁄2 inch. BSP threaded with 8mm turbo segments. Set contains:5 x Diamond Cores with 8mm Turbo Segments, Sizes: 38mm, 52mm, 65mm, 117mm, 127mm.1 x SDS Plus Extension Adaptor 10mm x 115mm.1 x HEX Extension Adaptor 12mm x 88 mm.1 x SDS Plus Extension Adaptor 10mm x 240mm.1 x HEX Extension Adaptor 12mm x 240mm.1 x A-Taper Pilot Drill 10 x 200mm.1 x Extractor Drift Key. ROTARY USE ONLY – Must not be used on Percussion/Hammer mode. DO NOT USE DIAMOND CORES LARGER THAN 78mm IN DIAMETER WITH SDS PLUS DRILLS AS THIS MAY RESULT IN DAMAGE TO THE POWER TOOL OR SDS ADAPTOR. Diamond Cores give the best results when used with a purpose built core drilling machine
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus Extreme 2 Drill Bit has the following dimensions: Diameter: 6mmWorking Length: 50mmOverall Length: 110mmPack Quantity: 1
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 6.5mmWorking Length: 150mmOverall Length: 210mmPack Quantity: 1
DEWALT Wood Auger Drill Bits have a threaded centre point to aid accurate drilling. The outer cutting spur provides clean holes with less splintering and the drill bits feature a special Lewis spiral flute which allows for fast removal of debris and rapid drilling. Ideal for rapid, precise drilling. Typically used for boring clean precise holes through beams, joists, doors, etc. Sizes 6-10mm have cylindrical shanks and sizes 12-32mm have hexagonal shanks.This DEWALT Wood Auger Drill Bit has the following specification: Size: 14mmWorking Length: 100mmOverall Length: 200mm
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 10.50mm.Working length: 87mm.Overall length: 133mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 5.50mm.Working length: 57mm.Overall length: 93mm.
The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502758 Auger bit - long series has the following dimensions:Drillbit diameter: 16.0mmTotal length: 400mmWorking Length: 323mm
The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 22 mm.Length : 165 mm.
The Irwin Blue Groove 4X Flat Bits have a patented groove point, and cutting edge designed to cut and not scrape the timber 4 times faster than standard flat bits. The parabolic scoop optimises control and removal of wood chips. Increased relief angle from 12° to 17°. The shank is 152mm in length and 10% larger in diameter for added durability.The Irwin IRW10502813 Blue Groove 4x flat bit has the following specific dimension:Diameter: 20mm
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 57 mm dia
Irwin 9.5mm Shank Arbor/Mandrel with removable pilot drill for easy replacement. Available in multiple chuck sizes for toughness and long life and with a tough, durable construction.Irwin Mandrel 9.5 mm (14-30 mm). Sizes : 14-30 mm (9/16 -1 3/16 in). Shank : 9.5 mm (3/8 in) Hex
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 8.0mm.Total length: 160mm.Working length: 100mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 10.50mm.Working length: 87mm.Overall length: 133mm.
The Dormer A108 Metric Split Point HSS Jobber Drill Bits are designed specifically for machining stainless steels. The quick spiral helix enables rapid swarf removal. Manufactured to DIN 338 RW / BS328 / ISO 235. Specification Flute Geometry: Quick Helix, Right hand spiral.Point Angle: 135°: up to 1.5mm: 135° Split Point, 1.6mm, 1/16 and above.Surface Treatment: Blue.Material: High Speed Steel.Tip diameter: 5.0mm.Working length: 52mm.Overall length: 86mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 3/16in.Working length: 52mm.Overall length: 86mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 5.80mm.Working length: 57mm.Overall length: 93mm.
Dormer A110 Imperial Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to DIN 340RN/BS328/ISO 494 standards.Tip diameter: 1/4in. Working length: 97mm.Overall length: 148mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 3/8in.Working length: 87mm.Overall length: 133mm.
The Dormer A110 Metric Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to: DIN 340RN/BS328/ISO 494.Tip diameter: 7.0mm.Working length: 102mm.Overall length: 156mm.
The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. These extra long bits are 40cm (16in) in length, making them ideal for drilling through walls, ceilings and floors.Specifications:Diameter: 18mm.Working length: 10mm (4in).Overall length: 400mm (16in).
The Faithfull SDS Max drills have a specially designed shank which enables them to fit into any machine with an SDS Max Chuck. These are generally large and powerful machines and the special SDS Max drill design ensures there is no slippage. All drill bits have a special L shaped flute profile for increased dust extraction and are also ideal for concrete and brick. The Faithfull FAIMAX25520 SDS Max drill has the following specifications:Size: 25mmWorking length: 400mmOverall length: 520mm
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 14mm.Length: 152mm.
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102791 Hard Tile Drillbit has the following specifications:Diameter: 6mm.
The Vitrex Diamond Grit Edged Drill Bits are ideal for drilling hard tiles. The slotted bit design makes for easy waste removal. It is suitable for drilling porcelain, granite, quarry, stone, marble, terracotta and ceramic tiles.The VIT102796 Hard Tile Drillbit has the following specifications:Diameter: 18mm.
The Irwin long auger wood drill bits have been designed for all general wood boring and offer a superior performance. The single spur cutting edge scribes the circumference of the hole for a smoother quality finish. The hexagon shank prevents slipping in a drill chuck or bit extension. The solid centre provides extra rigidity whilst boring, the self-feeding screw point provides faster boring in both soft and hard woods and the fully hardened body from tip to shank provides extra durability.The Irwin IRW10502745 Auger bit - long series has the following dimensions:Drillbit diameter: 10.0mmTotal length: 400mmWorking Length: 323mm
The Halls MC High Speed Steel Step Drill provides an easy way to cut the hole size you want. Each tool cuts parallel hole sizes. For use on sheet metal to stated maximum thickness.Size range.20,21,22,23,24,25,26,27,28,29,30mm.Maximum Material Thickness. 4mm.Shank to fit size. 13mm. When drilling metals use a coolant.
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 35 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
IRWIN® HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high-quality HSS steel containing 5% cobalt (Co). The added 5% cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish. This 15 Piece Set contains the following sizes: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size: 2.5 x 57mm.PVC Tube.
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size 10.0 x 133mm.PVC Tube.
The Irwin SDS Speedhammer Plus Drill Bits are designed for SDS drilling. They drill exceptionally fast into brick, block, masonry, concrete and granite. The patented, unique single flute design ensures efficient, speedy removal of dust and lower vibrations and 28% greater capacity meaning more efficient waste removal. They have a patented extra short drill bit head which means the head takes 80% of the workload, ensuring higher durability and speed. Clears drilling dust directly into the flute, reducing the risk of clogging. The bits have 25% more tungsten carbide for extra strength and they drill 25% faster than competitive drill bits with the same high durability. In addition, they have more aggressive cutting angles and self-centring for faster drilling.Irwin Speedhammer Plus Drill Bit. Specifications:Diameter: 14.0mm.Total length: 300mm.Working length: 240mm.
