The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit.Single pack. Size: 13.0 x 151mm.
Faithfull Long Series Combination Auger Bits can be used in either a hand or power drill at low speeds. Machined from high quality carbon steel, they feature a pitched screw point for accurate starting with a wide flat spiral for improved stability, straight tracking and fast waste removal. Augers may be use in timber, plywood, MDF and blockwood and can be resharpened using a hand file. Extra long series for deep boring. Overall Length: 400mm.Size.8 mm x 400 mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 4.0 x 75mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 2.5 x 57mm.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit (2). Size 5.0 x 86mm.
The Irwin Glass & Tile Drill Bits are suitable for drilling glass, porcelain and ceramics. Drill with low RPM (300RPM recommended), water cooling is also recommended. Do not use on hammer setting.The Irwin IRW10507912 glass & tile drill bit 5 piece set includes the following pieces:4, 5, 6, 8 and 10mm
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Size: 37 mm dia
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 3.0mm.Working length: 33mm. Overall length: 61mm.
The Faithfull Professional Long Series HSS Jobber Drill Bits have a longer length for deeper drilling requirements. Designed to meet the requirement of the professional user, these drills are manufactured from M2 grade steel and are fully ground to meet the requirements of DIN 338 and feature a 135 degree non slip split point. Their robust design gives less breakage, easier hole start and improved penetration. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels.The Faithfull FAIPP300LS Pre Pack HSS Jobber Drills Long Series 3.0mm have the following specifications:Diameter: 3.0mm. Overall Length: 100mm. Pack quantity: 2.
Starrett BI Metal Cordless Smooth Cutting Hole Saws (CSC Hole Saws) are constructed of hardened heat and abrasion resisting high speed steel teeth with a tough alloy body and cap, giving exceptional strength, durability and shatter resistance. Designed for use with battery operated power tools, our CSC Hole Saws will cut twice as many holes as the equivalent standard hole saw per battery charge. Advantages:The perfect tool for on site work with battery operated power tools.Ideal for cutting stainless, tool and mild steel sheeting plus plasterboard, wood and thin plasticsComplete assembly - there is no requirement to purchase a separate arbor and pilot drill.Constant pitch teeth provide exceptionally smooth cuts. Pitch 8 teeth per 25mm/inch.Safety stop at the base of the hole saw prevents drilling beyond maximum cutting depth.Size 20mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 6 mm Length 60 mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 6 mm x 400 mm.
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.7 mm x 300 mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 2.0mm.Working length: 24mm.Overall length: 49mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 6.80mmWorking length: 69mm.Overall length: 109mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 3.80mmWorking length: 43mm.Overall length: 75mm.
The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes. Special split-point ensures easy starting and accurate drill location.
The Dormer A120 Metric HSS Stub Drill Bits for general machining applications and is ideal for use in portable drills, turrets and automatic lathes. Special split-point ensures easy starting and accurate drill location.
The Dormer A110 Metric Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to: DIN 340RN/BS328/ISO 494.Tip diameter: 3.2mm.Working length: 69mm.Overall length: 106mm.
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 1.40mm.Working length: 18mm.Overall length: 40mm.
Dormer Metric A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Made to DIN 338RN/BS328/ISO 235 standards. PLEASE NOTE ALL sizes under 2.0mm are NOT TiN Coated.Tip diameter: 6.20mm.Working length: 63mm.Overall length: 101mm.
The Dormer Imperial A002 TiN Jobber Drill Bits have a TiN tip coating for increased tool life and performance. It has a self-centring split point for superb hole quality and positional accuracy. It will drill steel, stainless, cast iron, ceramics, plastics and many other materials with ease. Suitable for both hand and machine use. Made to DIN 338RN/BS328/ISO 235 standards.Tip diameter: 1/8in. Working length: 36mm.Overall length: 65mm.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 8.0mm.Working Length: 72mm.Overall Length: 117mm.Pack Quantity: 10.
The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.Irwin HSS Pro TiN Coated Drill Bit. Size 7.5 x 109mm.
