The DEWALT Tungsten Carbide Tipped (TCT) Hinge Boring Bit for drilling cantilever hinges. TCT cutting edges for fast, clean, precise, countersink hinge drilling. Ideal for man made materials with abrasive resins. Hexagonal shank facilitates a firm chuck grip. Diameter: 35mm.Length: 65mm.
The DEWALT Self-Feed Drill Bits are ideal for drilling of clean holes in wood, MDF, hardboard and chipboard. They have two sharp cutting edges and an aggressive 'self feed' spur for rapid penetration into material. They are fitted with a non-slip shank for better in chuck bit retention. For use with corded and cordless drills.These DEWALT Self-Feed Drill Bits have the following specification: Diameter: 54mm.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 15mmWorking Length: 100mmOverall Length: 160mmPack Quantity: 1
The DEWALT SDS Max Drill Bit has a 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability.1 x DEWALT SDS Max Drill Bit 12 x 540mm
The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed. Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.This DEWALT Extreme Flatwood Drill Bit has the following specification: Diameter: 18mm.Length: 152mm.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 3.5mm.Working Length: 39mm.Overall Length: 70mm.Pack Quantity: 2.
The DEWALT Extreme Impact Masonry Drill Bits have a carbide tip for fast drilling, with an innovative flute design for fast material removal. They have a 1/4in hex shank for use with impact drivers and screwdrivers with bit holder or chuck. Suitable for wood, plastics, concrete, brick, multi-layer materials and masonry. Ideal for engineers in construction, joinery and maintenance applications Sizes: 4, 5, 5.5, 6 and 8mm.
This Starrett Holesaw Kit is ideal for cutting stainless and mild steel sheeting, plasterboard, wood and thin plastics. The holesaws are constructed from heat-resistant, hardened steel with constant pitch teeth for exceptionally smooth cuts. Completely assembled ready for use. A safety stop collar at the base of the holesaw prevents travel beyond the holesaw depth. Supplied in a plastic carry case with the following sizes: 20, 25 and 32mm.
The Faithfull HSS taper drills are used for drilling sheet materials. They will drill a hole of any diameter between the stated sizes. Please note that use of a cutting fluid is advisable with this drill.The Faithfull FAITDSET3 taper drill set of 3 are made from high speed steel (HSS) consisting of:1 x 4-12mm1 x 6-20mm1 x 16-30mm The set is supplied in a metal storage case.
The Halls High Speed Steel Step Drill for drilling holes in ferrous and non-ferrous materials up to 5mm thick.Size Range. 4, 6, 8, 10, 12mm.Shank. 1/4 Hexagon.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Irwin Holesaw Bi Metal High Speed Diameter: 62mm.
The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including: aluminium, copper, iron, stainless steel, wood and zinc.Irwin Holesaw Bi Metal High Speed Diameter: 152mm.
The Bahco 9626 Series Combination Auger Bit is made from hardened tool steel and lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. Part of the tang has a hexagonal shank (15mm long) for firm grip in the chuck, suitable for hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9626 Series Combination Auger Bit has the following specification: Size: 7mmWorking Length: 155mmOverall Length: 230mm
The BlueSpot Step Drill is manufactured from high steel for increased durability and cutting power. Titanium coated to reduce friction and heat. Specially designed for precision drilling of holes in aluminium, brass, copper, plastic, steel and wood. 2mm step increments. The set is supplied in a robust metal case and contains the following: 1 x 5 Step Drill 4-12mm1 x 9 Step Drill 4-22mm1 x 10 Step Drill 4-32mm
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 6.50mmWorking length: 63mm.Overall length: 101mm.
Suitable for use with Holesaw sizes ranging from 14 mm - 30 mm dia. Fitted with a 6.5mm/1/4 in pilot drill, with set screw in the arbor body allowing easy replacement of the pilot drill. Shank Size: 6.5mm.
The Dormer A110 Metric Long Series Drill Bits is a general purpose long reach drill. Ideal for drilling deep holes in a wide range of materials and are suitable for both hand and machine use. Manufactured to: DIN 340RN/BS328/ISO 494.Tip diameter: 4.20mm.Working length: 78mm.Overall length: 119mm.
The Dormer A101 Metric Traditional Flute Ground Jobber Drill Bits are ideal for general machining applications. This HSS drill bit has a left hand spiral and a blue finish (bright below 3mm). Manufactured to DIN 338 LN / BS328 / ISO 235. Specification Flute Geometry: Standard Helix, Left hand spiral.Point Angle: 118°.Material: High Speed Steel.Tip diameter: 5.0mm.Working length: 52mm. Overall length: 86mm.
Dormer A094 HSS TiN Coated Metric jobber drills in round plastic 'Select-A Drill' case with each size embossed for ease of identification.No.419: 19 Drills 1.00 to 10.00mm by 0.5mm Set Contains: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10mm drills.
Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres. Has a 118° point angle with a 60° included countersink.Tip diameter: 6.30mm.Working length: 2.50mm.Overall length: 45.0mm.
Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres. Has a 118° point angle with a 60° included countersink.Tip diameter: 10mm.Working length: 4mm.Overall length: 56.0mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 14 mm HSS.Working length: 83mm.Overall length: 156mm.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
